Draft CD 1 - Revision history

James Klassen at 21:50, 27 October 2025

2025-10-27T21:50:08Z

James Klassen at 21:46, 27 October 2025

2025-10-27T21:46:22Z

James Klassen at 15:01, 16 February 2024

2024-02-16T15:01:21Z

James Klassen at 14:58, 14 February 2024

2024-02-14T14:58:04Z

James Klassen at 14:56, 14 February 2024

2024-02-14T14:56:24Z

James Klassen at 14:43, 14 February 2024

2024-02-14T14:43:11Z

James Klassen at 14:41, 14 February 2024

2024-02-14T14:41:55Z

James Klassen at 23:28, 13 February 2024

2024-02-13T23:28:23Z

James Klassen at 23:17, 13 February 2024

2024-02-13T23:17:46Z

James Klassen at 21:54, 13 February 2024

2024-02-13T21:54:53Z

@@ Line 6: / Line 6: @@
 <big><big>Division D - Construction Details</big></big>
 <hr>
-<big><big><big><big><big>{{hilite | SBS | Metal Edge Termination|| 2026-October-31 }} ([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edge | Article 10.3.4.2.]])</big></big></big></big></big>
+<big><big><big><big><big>SBS | Metal Edge Termination ([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edge | Article 10.3.4.2.]])</big></big></big></big></big>
 {{Template:Construction Details Header}}
 <div class="panel panel-success">

@@ Line 6: / Line 6: @@
 <big><big>Division D - Construction Details</big></big>
 <hr>
-<big><big><big><big><big>EPDM | Membrane Termination A (Wall) ([[EPDM_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big>
+<big><big><big><big><big>{{hilite | SBS | Metal Edge Termination|| 2026-October-31 }} ([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edge | Article 10.3.4.2.]])</big></big></big></big></big>
 {{Template:Construction Details Header}}
 <div class="panel panel-success">
-<div class="panel-heading"><big>'''EPDM Details'''</big></div>
+<div class="panel-heading"><big>'''SBS Details'''</big></div>
 <div class="panel-body">
 <div class="col-md-6">
@@ Line 22: / Line 22: @@
 === WORK INCLUDED ===
-;(1) [[EPDM Roof Systems Standard#PART_6|<big>Air/Vapour Control Layers</big>]]:
+;(1) <big>Suitable field substrate</big>:
-:As specified by the ''Design Authority'' and installed to provide continuity for optimal control.
+:May be the [[SBS Roof Systems Standard#PART_2| roof ''deck'']] or [[SBS Roof Systems Standard#PART_5 |''deck'' overlay]] (if an uninsulated system), or [[SBS Roof Systems Standard#PART_8| insulation and an overlay]] (if ''conventionally insulated'').
-;(2) [[EPDM Roof Systems Standard#PART_7|<big>Insulation</big>]]:
+;(2) <big>Primer or adhesive</big>:
-:Installed in keeping with Section 7.3.  Multiple layering illustrated; layers must be offset and staggered at least 304.8 mm (12”) in each direction.
+:For self-adhered or adhered membranes, as required by the ''manufacturer''.
-;(3) [[EPDM Roof Systems Standard#PART_8|<big>Insulation Overlay Panel</big>]]:
+;(3) [[SBS Roof Systems Standard#PART_9|<big>Base field membrane</big>]]:
-:Required for fully adhered membrane systems or when overburden is specified.  Panels must be offset and staggered from underlying insulation panels.
+:Carried continuously over the outside edge at least 50.8 mm (2”) downward, or 50.8 mm past any cold joint.
-;(4) [[EPDM Roof Systems Standard#PART_9|<big>Field Membrane</big>]]:
+;(4) <big>Sealant or mastic</big>:
-:See Table 9.2. for permissible application methods and corresponding membrane properties.  Membrane must be installed according to the requirements in Section 9.3.
+:Applied on membrane, beneath metal edge flashing.
-;(5) [[EPDM Roof Systems Standard#PART_10|<big>Edge Securement</big>]]:
+;(5) <big>[[SBS Roof Systems Standard#PART_13| Metal edge flashing</big>]] (flush with roof surface):
-:Proprietary to the membrane manufacturer.  Edge securement is required, irrespective of how the membrane is applied (i.e., adhered, self-adhered, mechanically fastened).
+:Fasteners spaced no more than 203.2 mm (8”) on the top face in two offsetting rows.
-;(6) [[EPDM Roof Systems Standard#PART_10|<big>Mechanical Fastening</big>]]:
+:A hemmed drip edge (shown) is required (Refer to Article 13.2.2.1. for fabrication requirements).
-:Edge securement must be anchored to the roof structure to prevent membrane movement.
+;(6) [[SBS Roof Systems Standard#PART_9|<big>Membrane flashing strip</big>]]:
-;(7) [[EPDM Roof Systems Standard#PART_10|<big>Primer or Adhesive</big>]]:
+:Applied to the metal edge flashing and overlapping onto the field membrane at least 101.6 mm (4”). Prime when required by the ''manufacturer'' (primer illustrated).
-:Proprietary to the membrane manufacturer.  Primer may be required for self-adhered membranes; adhesive is required for all other applications.  All membranes applied to the vertical substrate must be fully adhered.
+;(7) [[SBS Roof Systems Standard#PART_9|<big>Cap field membrane</big>]]:
-;(8) [[EPDM Roof Systems Standard#PART_10|<big>Membrane Flashing</big>]]:
+:Installed according to Part 9 requirements.
-:May be run continuously up the vertical substrate from the field or installed as separate flashing (see membrane manufacturer requirements).  Membrane shall be carried up the vertical substrate at least 203.2 mm (8”) above the ''finished roof system surface'', plus at least 76.2 mm (3”) for wall control layer overlap. In regions where heavy snow accumulation is possible, or to accommodate future roof membrane replacement, membrane should be carried at least 304.8 mm (12”) up the vertical substrate.
+;(8) <big>Edge mastic</big>:
-;(9) [[EPDM Roof Systems Standard#PART_10|<big>Rigid Support for Through-wall Flashing (optional)</big>]]:
+:Apply mastic or another membrane-compatible sealant to the outer exposed edge of the field cap sheet membrane.  Coat with granules.
 === RELATED WORK BY OTHERS ===
-;(A) [[EPDM Roof Systems Standard#PART_2|<big>Acceptable Deck</big>]]
+;(A) [[SBS Roof Systems Standard#PART_2|<big>Structural Roof Deck</big>]]
-:Illustrated deck is representative.  See Sub-section 2.1.5. for acceptable ''deck'' types and conditions.
+:Generic and representative only.
-;(B) [[EPDM Roof Systems Standard#PART_2|<big>Wall Structure</big>]]
+;(B) [[EPDM Roof Systems Standard#PART_10|<big>Roof edge substrate</big>]]
-:Illustrated wall is representative.  Wall control layers (i.e., water resistive barrier) must overlap ''roofing system'' to achieve ''continuity''.  See Sub-section 2.1.7. for wall conditions.
+:Wood blocking, required for conventionally insulated roofs.
-;(C) <big>Wall System Finish</big>
+;(C) <big>Wall assembly</big>
-:Illustrated system is representative and shows water-resistive barrier overlapping roof membrane (See above, Item 8).
+:Generic and representative only.
 </div><!-- COL-6-MD -->
@@ Line 61: / Line 52: @@
 </div><!-- PANEL -->
-'''NOTE''': See the [[EPDM Roof Systems Standard | '''EPDM Roof Systems Standard''']] for additional requirements.
+'''NOTE''': See the [[SBS Roof Systems Standard | '''SBS Roof Systems Standard''']] for additional requirements.
 <hr>
-[[EPDM Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''EPDM Roof System Details'']]
+[[SBS Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''SBS Roof System Details'']]
 [[Main Page | <i class="fa fa-home fa"></i> Home]]
 {{Template:RPM Page Footer with Copyright and Current Date}}

← Older revision		Revision as of 15:01, 16 February 2024
Line 69:		Line 69:
	[[Main Page \| <i class="fa fa-home fa"></i> Home]]		[[Main Page \| <i class="fa fa-home fa"></i> Home]]

−	{{~~Tempate~~:RPM Page Footer with Copyright and Current Date}}	+	{{Template:RPM Page Footer with Copyright and Current Date}}

@@ Line 6: / Line 6: @@
 <big><big>Division D - Construction Details</big></big>
 <hr>
-<big><big><big><big><big>EPDM | Membrane Termination B (Wall) ([[EPDM_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big>
+<big><big><big><big><big>EPDM | Membrane Termination A (Wall) ([[EPDM_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big>
 {{Template:Construction Details Header}}
 <div class="panel panel-success">
@@ Line 14: / Line 14: @@
 <div style="text-align:center; vertical-align:center">
 <br>
-[[File:10.3.2.3.-EPDM-B.png|class=img-responsive | link=https://rpm.rcabc.org/images/c/c6/10.3.2.3.-EPDM-B.png]]
+[[File:10.3.2.3.-EPDM-A.png |class=img-responsive | link=https://rpm.rcabc.org/images/5/53/10.3.2.3.-EPDM-A.png]]
 :Drawing NTS
 </div>
@@ Line 38: / Line 38: @@
 ;(8) [[EPDM Roof Systems Standard#PART_10|<big>Membrane Flashing</big>]]:
 :May be run continuously up the vertical substrate from the field or installed as separate flashing (see membrane manufacturer requirements).  Membrane shall be carried up the vertical substrate at least 203.2 mm (8”) above the ''finished roof system surface'', plus at least 76.2 mm (3”) for wall control layer overlap. In regions where heavy snow accumulation is possible, or to accommodate future roof membrane replacement, membrane should be carried at least 304.8 mm (12”) up the vertical substrate.
-;(9) [[EPDM Roof Systems Standard#PART_10|<big>Membrane Edge Securement and Sealant</big>]]:
+;(9) [[EPDM Roof Systems Standard#PART_10|<big>Rigid Support for Through-wall Flashing (optional)</big>]]:
-:All membranes applied to a vertical surface must be mechanically fastened.  Fastener illustrated, together with sealant applied to upper membrane edge.
+:Where the ''wall'' is insulated on the exterior side of the structure, ''continuity'' of air and vapour controls must be protected from future damage during roof replacement.  This can be done by securing a suitable membrane receiver panel against the insulation.  The panel must be permanently affixed to the structure through the insulation.  During replacement of the roof membrane, membrane flashing may be removed from the receiver panel without disturbing the insulation and control layers.  In this way, material waste is also reduced.
 === RELATED WORK BY OTHERS ===
@@ Line 45: / Line 53: @@
 :Illustrated deck is representative.  See Sub-section 2.1.5. for acceptable ''deck'' types and conditions.
 ;(B) [[EPDM Roof Systems Standard#PART_2|<big>Wall Structure</big>]]
-:Illustrated wall is representative.  Wall control layers (i.e. water resistive barrier) must overlap ''roofing system'' to achieve ''continuity''.  See Sub-section 2.1.7. for wall conditions.
+:Illustrated wall is representative.  Wall control layers (i.e., water resistive barrier) must overlap ''roofing system'' to achieve ''continuity''.  See Sub-section 2.1.7. for wall conditions.
 ;(C) <big>Wall System Finish</big>
 :Illustrated system is representative and shows water-resistive barrier overlapping roof membrane (See above, Item 8).

@@ Line 23: / Line 23: @@
 ;(1) [[EPDM Roof Systems Standard#PART_6|<big>Air/Vapour Control Layers</big>]]:
-:As specified by the Design Authority and installed to provide continuity for optimal control.
+:As specified by the ''Design Authority'' and installed to provide continuity for optimal control.
 ;(2) [[EPDM Roof Systems Standard#PART_7|<big>Insulation</big>]]:
 :Installed in keeping with Section 7.3.  Multiple layering illustrated; layers must be offset and staggered at least 304.8 mm (12”) in each direction.
@@ Line 43: / Line 43: @@
 === RELATED WORK BY OTHERS ===
 ;(A) [[EPDM Roof Systems Standard#PART_2|<big>Acceptable Deck</big>]]
-:Illustrated deck is representative.  See Sub-section 2.1.5. for acceptable deck types and conditions.
+:Illustrated deck is representative.  See Sub-section 2.1.5. for acceptable ''deck'' types and conditions.
 ;(B) [[EPDM Roof Systems Standard#PART_2|<big>Wall Structure</big>]]
-:Illustrated wall is representative.  Wall control layers (i.e. water resistive barrier) must overlap roofing system to achieve continuity.  See Sub-section 2.1.7. for wall conditions.
+:Illustrated wall is representative.  Wall control layers (i.e. water resistive barrier) must overlap ''roofing system'' to achieve ''continuity''.  See Sub-section 2.1.7. for wall conditions.
 ;(C) <big>Wall System Finish</big>
 :Illustrated system is representative and shows water-resistive barrier overlapping roof membrane (See above, Item 8).

← Older revision		Revision as of 14:43, 14 February 2024
Line 1:		Line 1:
−	~~{{Template:RPM Info}}~~	+

	{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}		{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}