Draft CD 15 - Revision history

James Klassen: /* RELATED WORK BY OTHERS */

2024-02-26T15:38:22Z

‎RELATED WORK BY OTHERS

James Klassen at 15:37, 26 February 2024

2024-02-26T15:37:52Z

James Klassen at 23:26, 23 February 2024

2024-02-23T23:26:28Z

James Klassen: Blanked the page

2024-02-23T22:09:00Z

Blanked the page

James Klassen at 17:43, 5 October 2020

2020-10-05T17:43:44Z

James Klassen: Created page with "{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center" | colspan="2" | '''''Notice to Reader''''' |- | style="color:..."

2020-10-05T17:35:05Z

Created page with "{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center" | colspan="2" | <big>'''''Notice to Reader'''''</big> |- | style="color:..."

New page

{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center"
| colspan="2" | <big>'''''Notice to Reader'''''</big>
|-
| style="color: black; background-color: #ffffcc; width: 100%;text-align:center" | Images used in a Construction Detail are representative and <u>not intended in their representation of an assembly to be prescriptive</u>. Nor are they necessarily drawn to scale. Rather, they are provided to visually convey the Standards, Guiding Principles and Recommendations of the '''RoofStar Guarantee Standards''' for a Waterproofing or Water-shedding System. Actual design with respect to dimensions, the selection of materials and their application remains the responsibility of the ''Design Authority''.<br><br>The full text of applicable '''''RoofStar Guarantee Standards''''' may be read by using the <span style="color:#6495ed">'''blue hyperlinks'''</span>
|}
<div class="panel panel-success">
<div class="panel-heading"><big>'''ASM Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<div style="text-align:center; vertical-align:center">
[[File:ASM 11.2.1 Curb, Split Panel.jpg|class=img-responsive | link=http://rpm.rcabc.org/images/4/40/ASM_11.2.1_Curb%2C_Split_Panel.jpg]]
</div>

::Click below for a printable version of this page (N/A)

<div style="width:150px; text-align: left;">
:[[File:Pdf.png|100 px|link=http://rpm.rcabc.org/images/5/52/D1.7.6-3_Print_Sheet.pdf|'''Print Sheet''']]
</div>

</div>

<div class="col-md-6">
=== WORK INCLUDED ===
;(1) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMUNDERLAYMENT|'''Underlayment''']]: The type of underlay required is determined by roof slope.
;(2) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMINSULALIGNMENT|'''Insulation''']]: Offset and stagger layers 300 mm (12").
;(3) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMSEP-VENT|'''Separation layer''']]: Vapour-permeable layer over insulation, required on all insulated Architectural Sheet Metal Roof Systems. The material must be located between the insulation and metal panels (see [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Design_5 '''8.1.2 Design''']).
;(4) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMSLIP|'''Ventilation layer''']]: Recommended over asphaltic underlays and / or as required in this Standard (see [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Design_5 '''8.1.2 Design''']).
;(5) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMINSULLAYERING|'''Bearing plate''']]: Only thermally non-conductive clips or bars passing through the insulation assembly, or mechanically fastened bearing plates, may be used to secure and support insulation panels, or provide support for panel clips.
;(6) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMCLIP |'''Architectural metal panel clip''']]
;(7) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMPANEL |'''Architectural metal roof panel (lower)''']]: Lower, installed prior to the pipe flashing, cut hole large enough to allow for movement. Extend 400 mm (16") upslope beyond the pipe.
;(8) '''Spaced Cleat''': Cleats, set in accepted caulking, spaced 50 mm (2") and fastened with compatible non-corrosive flat head screws.
;(9) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMSEALANT |'''Sealant''']]
;(10) Split panel
;(11) '''Backpan Flashing''': Required for curbs up to 900 mm (36") wide.
;(12) '''Metal Curb Flashing'''
;(13) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMCOUNTER |'''Metal Counter Flashing''']]
;(14) '''Architectural metal roof panel (upper)''': Installed after penetration flashing. Cut hole for pipe penetration and turn lower panel end under to hook onto cleat.

<hr>

=== RELATED WORK BY OTHERS ===
;(A) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMDECK|'''Acceptable deck''']]
</div>
</div>
</div>

'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.

<hr>

[[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems|<i class="fa fa-chevron-circle-right fa" ></i> RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems]]

[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Construction Details'']]

@@ Line 44: / Line 44: @@
 ;(B) [[SBS Roof Systems Standard#PART_2|<big>Wall Structure</big>]]
 :Illustrated wall is representative.  Wall control layers (i.e. water resistive barrier) must overlap ''roofing system'' to achieve ''continuity''.  See Sub-section 2.1.7. for wall conditions.
 </div><!-- COL-6-MD -->

@@ Line 6: / Line 6: @@
 <big><big>Division D - Construction Details</big></big>
 <hr>
-<big><big><big><big><big>SBS | Membrane Termination B (Wall) ([[SBS_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big>
+<big><big><big><big><big>SBS | Membrane Termination C (Wall) ([[SBS_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big>
 {{Template:Construction Details Header}}
 <div class="panel panel-success">

← Older revision	Revision as of 23:26, 23 February 2024
Line 1:	Line 1:

	+
	+	{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
	+	__NOTOC__
	+
	+	<big><big>Division D - Construction Details</big></big>
	+	<hr>
	+	<big><big><big><big><big>SBS \| Membrane Termination B (Wall) ([[SBS_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls \| Article 10.3.2.3.]])</big></big></big></big></big>
	+	{{Template:Construction Details Header}}
	+	<div class="panel panel-success">
	+	<div class="panel-heading"><big>'''SBS Details'''</big></div>
	+	<div class="panel-body">
	+	<div class="col-md-6">
	+	<div style="text-align:center; vertical-align:center">
	+	<br>
	+	[[File:10.3.2.3.-SBS-C.png\|class=img-responsive \| link=https://rpm.rcabc.org/images/4/43/10.3.2.3.-SBS-C.png]]
	+	:Drawing NTS
	+	</div>
	+	</div><!-- COL-6-MD -->
	+
	+	<div class="col-md-6">
	+	=== WORK INCLUDED ===
	+
	+	;(1) [[SBS Roof Systems Standard#PART_6\|<big>Air/Vapour Control Layers</big>]]:
	+	:As specified by the ''Design Authority'' and installed to provide continuity for optimal control.
	+	;(2) [[SBS Roof Systems Standard#PART_7\|<big>Insulation</big>]]:
	+	:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at least 304.8 mm (12”) in each direction.
	+	;(3) [[SBS Roof Systems Standard#PART_8\|<big>Insulation Overlay Panel</big>]]:
	+	:Required for fully adhered membrane systems or when overburden is specified. Panels must be offset and staggered from underlying insulation panels.
	+	;(4) [[SBS Roof Systems Standard#PART_9\|<big>Base Sheet Field Membrane</big>]]:
	+	:See Table 9.2. for permissible application methods and corresponding membrane properties. Membrane must be installed according to the requirements in Section 9.3.
	+	;(5) [[SBS Roof Systems Standard#PART_10\|<big>Base Sheet Flashing Membrane</big>]]:
	+	:Install in keeping with the requirements in Section 10.3. Base sheet membrane flashing must extend onto the roof field at least 101.6 mm (4"). Membrane shall be carried up the vertical substrate at least 203.2 mm (8”) above the ''finished roof system surface'', plus at least 76.2 mm (3”) for wall control layer overlap. In regions where heavy snow accumulation is possible, or to accommodate future roof membrane replacement, membrane should be carried at least 304.8 mm (12”) up the vertical substrate.
	+	;(6) [[SBS Roof Systems Standard#PART_10\|<big>Cap Sheet Field Membrane</big>]]:
	+	:See Table 9.2. for permissible application methods and corresponding membrane properties. Membrane must be installed according to the requirements in Section 9.3.
	+	;(7) [[SBS Roof Systems Standard#PART_10\|<big>Cap Sheet Flashing Membrane</big>]]:
	+	:Install in keeping with the requirements in Section 10.3. Cap sheet membrane flashing must extend onto the field at least 152.4 mm (6"), or at least 50.8 mm (2”) past the edge of the base membrane flashing.
	+	;(8) [[SBS Roof Systems Standard#PART_10\|<big>Membrane Edge Securement and Sealant</big>]]:
	+	:All membranes applied to a vertical surface must be mechanically fastened. 2-component fleece-reinforced PMMA/PUMA is illustrated, together with sealant applied to upper membrane edge (See [[SBS Roof Systems Standard#10.3.3.4. Liquid Membrane Flashing \| Article 10.3.3.4.]] for application requirements); liquid membrane flashing must be compatible with the primary membrane and listed in [https://rpm.rcabc.org/index.php?title=Division_C Division C] of the RPM.
	+
	+	=== RELATED WORK BY OTHERS ===
	+	;(A) [[SBS Roof Systems Standard#PART_2\|<big>Acceptable Deck</big>]]
	+	:Illustrated deck is representative. See Sub-section 2.1.5. for acceptable ''deck'' types and conditions.
	+	;(B) [[SBS Roof Systems Standard#PART_2\|<big>Wall Structure</big>]]
	+	:Illustrated wall is representative. Wall control layers (i.e. water resistive barrier) must overlap ''roofing system'' to achieve ''continuity''. See Sub-section 2.1.7. for wall conditions.
	+	;(C) <big>Wall System Finish</big>
	+	:Illustrated system is representative and shows water-resistive barrier overlapping roof membrane (See above, Item 8).
	+
	+	</div><!-- COL-6-MD -->
	+	</div><!-- PANEL BODY -->
	+	</div><!-- PANEL -->
	+
	+	'''NOTE''': See the [[SBS Roof Systems Standard \| '''SBS Roof Systems Standard''']] for additional requirements.
	+
	+	<hr>
	+
	+	[[SBS Roof System Details\|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''SBS Roof System Details'']]
	+
	+	[[Main Page \| <i class="fa fa-home fa"></i> Home]]
	+
	+	{{Template:RPM Page Footer with Copyright and Current Date}}

← Older revision		Revision as of 22:09, 23 February 2024
Line 1:		Line 1:
−	~~{\| class="wikitable" \| style="color: black; background-color: orange; width: 100%;text-align:center"~~
−	~~\| colspan="2" \| <big>'''''Notice to Reader'''''</big>~~
−	\|-
−	\| style="color: black; background-color: #ffffcc; width: 100%;text-align:center" \| Images used in a Construction Detail are representative and <u>not intended in their representation of an assembly to be prescriptive</u>. Nor are they necessarily drawn to scale. Rather, they are provided to visually convey the Standards, Guiding Principles and Recommendations of the '''RoofStar Guarantee Standards''' for a Waterproofing or Water-shedding System. Actual design with respect to dimensions, the selection of materials and their application remains the responsibility of the ''Design Authority''.<br><br>The full text of applicable '''''RoofStar Guarantee Standards''''' may be read by using the <span style="color:#6495ed">'''blue hyperlinks'''</span>
−	\|}
−	~~<div class="panel panel-success">~~
−	~~<div class="panel-heading"><big>'''ASM Details'''</big></div>~~
−	~~<div class="panel-body">~~
−	~~<div class="col-md-6">~~
−	~~<div style="text-align:center; vertical-align:center">~~
−	~~[[File:ASM 12.1.1 Built-in Gutter (Design).jpg\|class=img-responsive \| link=http://rpm.rcabc.org/images/3/3b/ASM_12.1.1_Built-in_Gutter_%28Design%29.jpg]]~~
−	~~</div>~~

−	~~::Click below for a printable version of this page (N/A)~~
−
−	~~<div style="width:150px; text-align: left;">~~
−	~~:[[File:Pdf.png\|100 px\|link=http://rpm.rcabc.org/images/5/52/D1.7.6-3_Print_Sheet.pdf\|'''Print Sheet''']]~~
−	~~</div>~~
−
−
−	~~</div><!-- COL-MD-6 -->~~
−
−	~~<div class="col-md-6">~~
−	~~=== WORK INCLUDED ===~~
−	;(1) '''Membranes''': Membranes must be installed to '''''RoofStar Guarantee Standards''''' and the manufacturer's printed instructions ({{hilite \| NOTE: Fasteners shall be installed 4” or more above the maximum water line, and gutters must include a scupper overflow drain. \|\| 2017-April-22 }}). Also refer to [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Built-in_Gutters '''12.2 Built-in Gutters'''] in the '''''RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems'''''.
−	~~;(2) '''Adhesion''': Membranes must be fully adhered, where exposed, and mechanically fastened at terminations 300 mm (12") o/c~~
−	;(3) '''Height''': The minimum vertical sealed height above the maximum water level is 150 mm (6"). The membrane run up the slope will vary with roof pitch. Increase height in heavy snow regions. Built-in gutter membranes can be extended to act as [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Eave_and_Valley_Protection_2 '''Ice and Water Protection''']. Underlay or eave protection membrane must overlap built-in gutter membrane by a minimum of 200 mm (8") and be installed in shingle fashion (not shown for clarity).
−	~~;(4) Metal cap flashing~~
−
−	~~<hr>~~
−
−	~~=== RELATED WORK BY OTHERS ===~~
−	~~;(A) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMDECK\|'''Acceptable Deck''']]~~
−	~~;(B) '''Dimension''': Dimensions of parapets, cants and water loading of gutters are variable and should be determined by design authority~~
−	~~</div><!-- COL-6-MD -->~~
−	~~</div><!-- PANEL BODY -->~~
−	~~</div><!-- PANEL -->~~
−
−	~~'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.~~
−
−	~~<hr>~~
−
−	~~[[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems\|<i class="fa fa-chevron-circle-right fa" ></i> RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems]]~~
−
−	~~[[Architectural Sheet Metal Construction Details\|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Construction Details'']]~~

@@ Line 9: / Line 9: @@
 <div class="col-md-6">
 <div style="text-align:center; vertical-align:center">
-[[File:ASM 11.2.1 Curb, Split Panel.jpg|class=img-responsive | link=http://rpm.rcabc.org/images/4/40/ASM_11.2.1_Curb%2C_Split_Panel.jpg]]
+[[File:ASM 12.1.1 Built-in Gutter (Design).jpg|class=img-responsive | link=http://rpm.rcabc.org/images/3/3b/ASM_12.1.1_Built-in_Gutter_%28Design%29.jpg]]
 </div>
@@ Line 23: / Line 23: @@
 <div class="col-md-6">
 === WORK INCLUDED ===
-;(1) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMUNDERLAYMENT|'''Underlayment''']]: The type of underlay required is determined by roof slope.
+;(1) '''Membranes''': Membranes must be installed to '''''RoofStar Guarantee Standards''''' and the manufacturer's printed instructions ({{hilite | NOTE: Fasteners shall be installed 4” or more above the maximum water line, and gutters must include a scupper overflow drain. || 2017-April-22 }}).  Also refer to [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Built-in_Gutters '''12.2 Built-in Gutters'''] in the '''''RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems'''''.
-;(2) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMINSULALIGNMENT|'''Insulation''']]: Offset and stagger layers 300 mm (12").
+;(2) '''Adhesion''': Membranes must be fully adhered, where exposed, and mechanically fastened at terminations 300 mm (12") o/c
-;(3) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMSEP-VENT|'''Separation layer''']]: Vapour-permeable layer over insulation, required on all insulated Architectural Sheet Metal Roof Systems.  The material must be located between the insulation and metal panels (see [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Design_5 '''8.1.2 Design''']).
+;(3) '''Height''': The minimum vertical sealed height above the maximum water level is 150 mm (6"). The membrane run up the slope will vary with roof pitch. Increase height in heavy snow regions.  Built-in gutter membranes can be extended to act as [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Eave_and_Valley_Protection_2  '''Ice and Water Protection''']. Underlay or eave protection membrane must overlap built-in gutter membrane by a minimum of 200 mm (8") and be installed in shingle fashion (not shown for clarity).
-;(4) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMSLIP|'''Ventilation layer''']]: Recommended over asphaltic underlays and / or as required in this Standard (see [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Design_5 '''8.1.2 Design''']).
+;(4) Metal cap flashing
 <hr>
 === RELATED WORK BY OTHERS ===
-;(A) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMDECK|'''Acceptable deck''']]
+;(A) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMDECK|'''Acceptable Deck''']]
 </div><!-- COL-6-MD -->
 </div><!-- PANEL BODY -->