Draft CD 17 - Revision history

James Klassen at 15:27, 26 February 2024

2024-02-26T15:27:18Z

James Klassen: Blanked the page

2024-02-23T22:09:26Z

Blanked the page

James Klassen at 15:49, 7 October 2020

2020-10-07T15:49:14Z

James Klassen: Created page with "{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center" | colspan="2" | '''''Notice to Reader''''' |- | style="color:..."

2020-10-05T18:34:03Z

Created page with "{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center" | colspan="2" | <big>'''''Notice to Reader'''''</big> |- | style="color:..."

New page

{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center"
| colspan="2" | <big>'''''Notice to Reader'''''</big>
|-
| style="color: black; background-color: #ffffcc; width: 100%;text-align:center" | Images used in a Construction Detail are representative and <u>not intended in their representation of an assembly to be prescriptive</u>. Nor are they necessarily drawn to scale. Rather, they are provided to visually convey the Standards, Guiding Principles and Recommendations of the '''RoofStar Guarantee Standards''' for a Waterproofing or Water-shedding System. Actual design with respect to dimensions, the selection of materials and their application remains the responsibility of the ''Design Authority''.<br><br>The full text of applicable '''''RoofStar Guarantee Standards''''' may be read by using the <span style="color:#6495ed">'''blue hyperlinks'''</span>
|}
<div class="panel panel-success">
<div class="panel-heading"><big>'''SBS Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<div style="text-align:center; vertical-align:center">
[[File:ASM 10.1.4 Eave and Rake Flashing (Zinc).jpg|class=img-responsive | link=http://rpm.rcabc.org/images/b/b3/ASM_10.1.4_Eave_and_Rake_Flashing_%28Zinc%29.jpg]]
</div>

::Click below for a printable version of this page (N/A)

<div style="width:150px; text-align: left;">
:[[File:Pdf.png|100 px|link=|'''Print Sheet''']]
</div>

</div>
<div class="col-md-6">
=== WORK INCLUDED ===
;(1) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMHOOKSTRIP | '''Separation membrane''']]: Separates the deck and the metal edge flashing.
;(2) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMFLASH-SECURE | '''Hook securement strip''']]: In this particular rake edge configuration, a similar strip is installed along the rake to secure the flush rake-edge flashing.
;(3) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMHOOKSTRIP | '''Continuous eave metal flashing''']]:
;(4) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMUNDERLAYMENT|'''Eave protection''']]: One ply of self-adhered modified bituminous underlayment material. Lap 50 mm (2") minimum on sides and 100 mm (4") minimum on ends.
;(5) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMUNDERLAYMENT|'''Underlayment''']]: Applicable for all Architectural Sheet Metal systems. For slopes less than 1:3, the entire roof slope must be covered with a <u>self-adhered</u> underlayment.
;(6) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMSEP-VENT|'''Ventilation material''']]: A ventilation space is required on slopes less than 1:3; entangled mesh (shown) may be used as void fill. The ventilation space facilitates drying as condensation forms on the underside of the metal panels.
;(7) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMCLIP|'''Metal panel clip''']]: Installed in keeping with the metal roof panel manufacturer's printed instructions.
;(8) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMHOOKSTRIP | '''Flush rake-edge flashing''']]: Note that panel hooks onto outside edge of flashing, which is mechanically secured to the roof deck.
;(9) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMPANEL |'''Architectural metal roof panel''']]

<hr>

=== RELATED WORK BY OTHERS ===
;(A) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMDECK|'''Acceptable deck''']]
;(B) '''Fascia Board'''
</div>
</div>
</div>

'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.

<hr>

[[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems|<i class="fa fa-chevron-circle-right fa" ></i> RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems]]

[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Construction Details'']]

← Older revision	Revision as of 15:27, 26 February 2024
Line 1:	Line 1:

	+
	+
	+	{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
	+	__NOTOC__
	+
	+	<big><big>Division D - Construction Details</big></big>
	+	<hr>
	+	<big><big><big><big><big>SBS \| Membrane Termination E (Wall) ([[SBS_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls \| Article 10.3.2.3.]])</big></big></big></big></big>
	+	{{Template:Construction Details Header}}
	+	<div class="panel panel-success">
	+	<div class="panel-heading"><big>'''SBS Details'''</big></div>
	+	<div class="panel-body">
	+	<div class="col-md-6">
	+	<div style="text-align:center; vertical-align:center">
	+	<br>
	+	[[File:10.3.2.3.-SBS-E.png\|class=img-responsive \| link=https://rpm.rcabc.org/images/a/ae/10.3.2.3.-SBS-E.png]]
	+	:Drawing NTS
	+	</div>
	+	</div><!-- COL-6-MD -->
	+
	+	<div class="col-md-6">
	+	=== WORK INCLUDED ===
	+
	+
	+	;(1) [[SBS Roof Systems Standard#PART_6\|<big>Air/Vapour Control Layers</big>]]:
	+	:As specified by the ''Design Authority'' and installed to provide continuity for optimal control.
	+	;(2) [[SBS Roof Systems Standard#PART_7\|<big>Insulation</big>]]:
	+	:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at least 304.8 mm (12”) in each direction.
	+	;(3) [[SBS Roof Systems Standard#PART_8\|<big>Insulation Overlay Panel</big>]]:
	+	:Required for fully adhered membrane systems or when overburden is specified. Panels must be offset and staggered from underlying insulation panels.
	+	;(4) [[SBS Roof Systems Standard#PART_9\|<big>Base Sheet Field Membrane</big>]]:
	+	:See Table 9.2. for permissible application methods and corresponding membrane properties. Membrane must be installed according to the requirements in Section 9.3.
	+	;(5) [[SBS Roof Systems Standard#PART_10\|<big>Base Sheet Flashing Membrane</big>]]:
	+	:Install in keeping with the requirements in Section 10.3. Base sheet membrane flashing must extend onto the roof field at least 101.6 mm (4"). Membrane shall be carried up the vertical substrate at least 203.2 mm (8”) above the ''finished roof system surface'', plus at least 76.2 mm (3”) for wall control layer overlap. In regions where heavy snow accumulation is possible, or to accommodate future roof membrane replacement, membrane should be carried at least 304.8 mm (12”) up the vertical substrate.
	+	;(6) [[SBS Roof Systems Standard#PART_10\|<big>Cap Sheet Field Membrane</big>]]:
	+	:See Table 9.2. for permissible application methods and corresponding membrane properties. Membrane must be installed according to the requirements in Section 9.3.
	+	;(7) [[SBS Roof Systems Standard#PART_10\|<big>Cap Sheet Flashing Membrane</big>]]:
	+	:Install in keeping with the requirements in Section 10.3. Cap sheet membrane flashing must extend onto the field at least 152.4 mm (6"), or at least 50.8 mm (2”) past the edge of the base membrane flashing.
	+	;(8) [[SBS Roof Systems Standard#PART_10\|<big>Membrane Edge Securement and Sealant</big>]]:
	+	:All membranes applied to a vertical surface must be mechanically fastened. Mechanically fastened termination (“term”) bar with tooled sealant shown.
	+	;(9) [[SBS Roof Systems Standard#PART_10\|<big>Surface Reglet Counter-flashing and Sealant</big>]]:
	+	:Surface reglet counter-flashing with bead of sealant applied in reglet cut. This flashing provides secondary protection for the “term” bar and safe-guards the sealant from weather-induced deterioration and mechanical damage.
	+
	+	=== RELATED WORK BY OTHERS ===
	+	;(A) [[SBS Roof Systems Standard#PART_2\|<big>Acceptable Deck</big>]]
	+	:Illustrated deck is representative. See Sub-section 2.1.5. for acceptable ''deck'' types and conditions.
	+	;(B) [[SBS Roof Systems Standard#PART_2\|<big>Wall Structure</big>]]
	+	:Illustrated wall is representative. Wall control layers (i.e. water resistive barrier) must overlap ''roofing system'' to achieve ''continuity''. See Sub-section 2.1.7. for wall conditions.
	+
	+	</div><!-- COL-6-MD -->
	+	</div><!-- PANEL BODY -->
	+	</div><!-- PANEL -->
	+
	+	'''NOTE''': See the [[SBS Roof Systems Standard \| '''SBS Roof Systems Standard''']] for additional requirements.
	+
	+	<hr>
	+
	+	[[SBS Roof System Details\|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''SBS Roof System Details'']]
	+
	+	[[Main Page \| <i class="fa fa-home fa"></i> Home]]
	+
	+	{{Template:RPM Page Footer with Copyright and Current Date}}

← Older revision		Revision as of 22:09, 23 February 2024
Line 1:		Line 1:
−	~~{\| class="wikitable" \| style="color: black; background-color: orange; width: 100%;text-align:center"~~
−	~~\| colspan="2" \| <big>'''''Notice to Reader'''''</big>~~
−	\|-
−	\| style="color: black; background-color: #ffffcc; width: 100%;text-align:center" \| Images used in a Construction Detail are representative and <u>not intended in their representation of an assembly to be prescriptive</u>. Nor are they necessarily drawn to scale. Rather, they are provided to visually convey the Standards, Guiding Principles and Recommendations of the '''RoofStar Guarantee Standards''' for a Waterproofing or Water-shedding System. Actual design with respect to dimensions, the selection of materials and their application remains the responsibility of the ''Design Authority''.<br><br>The full text of applicable '''''RoofStar Guarantee Standards''''' may be read by using the <span style="color:#6495ed">'''blue hyperlinks'''</span>
−	\|}
−	~~<div class="panel panel-success">~~
−	~~<div class="panel-heading"><big>'''SBS Details'''</big></div>~~
−	~~<div class="panel-body">~~
−	~~<div class="col-md-6">~~
−	~~<div style="text-align:center; vertical-align:center">~~
−	~~[[File:ASM 10.1.4 Eave and Rake Flashing (Zinc).jpg\|class=img-responsive \| link=http://rpm.rcabc.org/images/b/b3/ASM_10.1.4_Eave_and_Rake_Flashing_%28Zinc%29.jpg]]~~
−	~~</div>~~

−
−	~~::Click below for a printable version of this page (N/A)~~
−
−	~~<div style="width:150px; text-align: left;">~~
−	~~:[[File:Pdf.png\|100 px\|link=\|'''Print Sheet''']]~~
−	~~</div>~~
−
−	~~</div><!-- COL-MD-6 -->~~
−	~~<div class="col-md-6">~~
−	~~=== WORK INCLUDED ===~~
−	~~;(1) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMHOOKSTRIP \| '''Separation membrane''']]: Separates the deck and the metal edge flashing.~~
−	;(2) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMFLASH-SECURE \| '''Hook securement strip''']]: In this particular rake edge configuration, a similar strip is installed along the rake to secure the flush rake-edge flashing.
−	~~;(3) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMHOOKSTRIP \| '''Continuous eave metal flashing''']]:~~
−	;(4) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMUNDERLAYMENT\|'''Eave protection''']]: One ply of self-adhered modified bituminous underlayment material. Lap 50 mm (2") minimum on sides and 100 mm (4") minimum on ends.
−	;(5) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMUNDERLAYMENT\|'''Underlayment''']]: Applicable for all Architectural Sheet Metal systems. For slopes less than 1:3, the entire roof slope must be covered with a <u>self-adhered</u> underlayment.
−	;(6) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMSEP-VENT\|'''Ventilation material''']]: A ventilation space is required on slopes less than 1:3; entangled mesh (shown) may be used as void fill. The ventilation space facilitates drying as condensation forms on the underside of the metal panels.
−	;(7) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMCLIP\|'''Metal panel clip''']]: Installed in keeping with the metal roof panel manufacturer's printed instructions. Install on EPDM pad (not shown) or use a tall clip sized to support the panel on top of the ventilation layer.
−	;(8) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMHOOKSTRIP \| '''Flush rake-edge flashing''']]: Note that panel hooks onto outside edge of flashing, which is mechanically secured to the roof deck.
−	~~;(9) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMPANEL \|'''Architectural metal roof panel''']]~~
−
−	~~<hr>~~
−
−	~~=== RELATED WORK BY OTHERS ===~~
−	~~;(A) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMDECK\|'''Acceptable deck''']]~~
−	~~;(B) '''Fascia Board'''~~
−	~~</div><!-- COL-6-MD -->~~
−	~~</div><!-- PANEL BODY -->~~
−	~~</div><!-- PANEL -->~~
−
−	~~'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.~~
−
−	~~<hr>~~
−
−	~~[[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems\|<i class="fa fa-chevron-circle-right fa" ></i> RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems]]~~
−
−	~~[[Architectural Sheet Metal Construction Details\|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Construction Details'']]~~

@@ Line 28: / Line 28: @@
 ;(5) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMUNDERLAYMENT|'''Underlayment''']]: Applicable for all Architectural Sheet Metal systems.  For slopes less than 1:3, the entire roof slope must be covered with a <u>self-adhered</u> underlayment.
 ;(6) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMSEP-VENT|'''Ventilation material''']]: A ventilation space is required on slopes less than 1:3; entangled mesh (shown) may be used as void fill.  The ventilation space facilitates drying as condensation forms on the underside of the metal panels.
-;(7) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMCLIP|'''Metal panel clip''']]: Installed in keeping with the metal roof panel manufacturer's printed instructions.
+;(7) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMCLIP|'''Metal panel clip''']]: Installed in keeping with the metal roof panel manufacturer's printed instructions. Install on EPDM pad (not shown) or use a tall clip sized to support the panel on top of the ventilation layer.
 ;(8) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMHOOKSTRIP | '''Flush rake-edge flashing''']]: Note that panel hooks onto outside edge of flashing, which is mechanically secured to the roof deck.
 ;(9) [[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems#ASMPANEL |'''Architectural metal roof panel''']]