Eave Protection - Revision history

James Klassen at 15:35, 9 September 2021

2021-09-09T15:35:43Z

James Klassen at 15:33, 9 September 2021

2021-09-09T15:33:54Z

James Klassen at 21:14, 3 September 2021

2021-09-03T21:14:01Z

James Klassen at 21:03, 3 September 2021

2021-09-03T21:03:57Z

James Klassen at 20:25, 26 July 2021

2021-07-26T20:25:13Z

James Klassen at 21:31, 22 September 2020

2020-09-22T21:31:03Z

James Klassen at 21:38, 17 June 2020

2020-06-17T21:38:15Z

James Klassen at 17:26, 17 October 2016

2016-10-17T17:26:06Z

James Klassen at 21:17, 22 August 2016

2016-08-22T21:17:16Z

James Klassen at 20:16, 22 August 2016

2016-08-22T20:16:23Z

@@ Line 19: / Line 19: @@
 Eave protection is used to protect the eave and valley areas of steep sloped roofs from ice dam damage. An ice dam usually forms when the interior heat of the building warms the snow on the roof, causing it to melt and run down to the eaves. Normally, the eaves are overhanging the building and not heated from the inside. This allows the water to freeze and form an ice dam. As the ice dam grows bigger, it forms a barrier, which prevents water from draining. The water backs up behind the dam and gradually forces its way under the shingles (or shakes, tiles, etc.), through the roof deck, and into the structure. The results can range from minor staining to severe water damage to the structural members.
-Eave protection is designed to prevent the water from reaching the deck and leaking into the structure. Self-adhesive, rubberized asphalt composite sheet materials are now the standard for eave protection. Properly formulated and installed, these sheets have the potential for long life and great performance . The slope and climate conditions are considerations for selection; for '''''RoofStar Guarantee Standards''''' applicable to this topic, consult the '''[[RoofStar Guarantee Standards for Asphalt Shingles Roof Systems]]''' in this Manual.
+Eave protection is designed to prevent the water from reaching the deck and leaking into the structure. Self-adhesive, rubberized asphalt composite sheet materials are now the standard for eave protection. Properly formulated and installed, these sheets have the potential for long life and great performance . The slope and climate conditions are considerations for selection; for '''''RoofStar Guarantee Standards''''' applicable to this topic, consult the [[Asphalt Shingle Systems Standard | '''Standard for Asphalt Shingle Roof Systems''']] in this ''Manual''.
 '''Underlayment''' is used in the field areas of the roof (where eave protection is not required) to provide a secondary protection beneath the shingles during weather events that force water back up the slope underneath the shingles.  Nail-applied materials qualify only as underlayment on roof slopes greater than 1:3 (4/12).

@@ Line 12: / Line 12: @@
 <big><big><big><big><big>Eave Protection</big></big></big></big></big>
 {| class="wikitable" | style="color: black; background-color: #ffffcc; width: 100%;"
-| colspan="2"  | '''NOTICE TO READER''': This is an <u>information page only</u>.  To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual '''''RoofStar Guarantee Standards''''' located in [http://rpm.rcabc.org/index.php?title=Division_D:_Waterproofing_Systems_(Roofs)  '''Division D: Waterproofing Systems (Roofs)'''], [http://rpm.rcabc.org/index.php?title=Division_E:_Water-shedding_Systems '''Division E: Water-shedding Systems'''] or [http://rpm.rcabc.org/index.php?title=Division_F:_Grade-level_Waterproofing '''Division F: Grade-level Waterproofing'''].
+| colspan="2"  | '''NOTICE TO READER''': This is an <u>information page only</u>.  To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Division B | '''Division B''']].
 |}

@@ Line 23: / Line 23: @@
 '''Underlayment''' is used in the field areas of the roof (where eave protection is not required) to provide a secondary protection beneath the shingles during weather events that force water back up the slope underneath the shingles.  Nail-applied materials qualify only as underlayment on roof slopes greater than 1:3 (4/12).
+</div><!-- mainBodyDiv -->
 <hr>
-[[Division B: Essential Elements|<i class="fa fa-chevron-circle-left" ></i> ''Division B: Essential Elements'']]
+{{Tempate:RPM Page Footer with Copyright and Current Date}}

@@ Line 1: / Line 1: @@
 {{Template:RPM Info}}
 {| class="wikitable" | style="color: black; background-color: #ffffcc; width: 100%;"
 | colspan="2"  | '''NOTICE TO READER''': This is an <u>information page only</u>.  To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual '''''RoofStar Guarantee Standards''''' located in [http://rpm.rcabc.org/index.php?title=Division_D:_Waterproofing_Systems_(Roofs)  '''Division D: Waterproofing Systems (Roofs)'''], [http://rpm.rcabc.org/index.php?title=Division_E:_Water-shedding_Systems '''Division E: Water-shedding Systems'''] or [http://rpm.rcabc.org/index.php?title=Division_F:_Grade-level_Waterproofing '''Division F: Grade-level Waterproofing'''].

← Older revision		Revision as of 20:25, 26 July 2021
Line 1:		Line 1:
		+	{{Template:RPM Info}}
		+
	{\| class="wikitable" \| style="color: black; background-color: #ffffcc; width: 100%;"		{\| class="wikitable" \| style="color: black; background-color: #ffffcc; width: 100%;"
	\| colspan="2" \| '''NOTICE TO READER''': This is an <u>information page only</u>. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual '''''RoofStar Guarantee Standards''''' located in [http://rpm.rcabc.org/index.php?title=Division_D:_Waterproofing_Systems_(Roofs) '''Division D: Waterproofing Systems (Roofs)'''], [http://rpm.rcabc.org/index.php?title=Division_E:_Water-shedding_Systems '''Division E: Water-shedding Systems'''] or [http://rpm.rcabc.org/index.php?title=Division_F:_Grade-level_Waterproofing '''Division F: Grade-level Waterproofing'''].		\| colspan="2" \| '''NOTICE TO READER''': This is an <u>information page only</u>. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual '''''RoofStar Guarantee Standards''''' located in [http://rpm.rcabc.org/index.php?title=Division_D:_Waterproofing_Systems_(Roofs) '''Division D: Waterproofing Systems (Roofs)'''], [http://rpm.rcabc.org/index.php?title=Division_E:_Water-shedding_Systems '''Division E: Water-shedding Systems'''] or [http://rpm.rcabc.org/index.php?title=Division_F:_Grade-level_Waterproofing '''Division F: Grade-level Waterproofing'''].

← Older revision		Revision as of 21:31, 22 September 2020
Line 1:		Line 1:
		+	{\| class="wikitable" \| style="color: black; background-color: #ffffcc; width: 100%;"
		+	\| colspan="2" \| '''NOTICE TO READER''': This is an <u>information page only</u>. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual '''''RoofStar Guarantee Standards''''' located in [http://rpm.rcabc.org/index.php?title=Division_D:_Waterproofing_Systems_(Roofs) '''Division D: Waterproofing Systems (Roofs)'''], [http://rpm.rcabc.org/index.php?title=Division_E:_Water-shedding_Systems '''Division E: Water-shedding Systems'''] or [http://rpm.rcabc.org/index.php?title=Division_F:_Grade-level_Waterproofing '''Division F: Grade-level Waterproofing'''].
		+	\|}
		+
	<big><big><big>Asphalt Shingles, Cedar Shakes & Shingles</big></big></big>		<big><big><big>Asphalt Shingles, Cedar Shakes & Shingles</big></big></big>

← Older revision		Revision as of 21:38, 17 June 2020
Line 11:		Line 11:


		+	[[Division B: Essential Elements\|<i class="fa fa-chevron-circle-left" ></i> ''Division B: Essential Elements'']]

−	[[~~Building Ventilation~~\|~~<i class="fa fa-chevron-circle-right fa" ></i> ''Building Ventilation''~~]]	+	[[Main Page\|Home]]

← Older revision		Revision as of 17:26, 17 October 2016
Line 5:		Line 5:
	Eave protection is designed to prevent the water from reaching the deck and leaking into the structure. Self-adhesive, rubberized asphalt composite sheet materials are now the standard for eave protection. Properly formulated and installed, these sheets have the potential for long life and great performance . The slope and climate conditions are considerations for selection; for '''''RoofStar Guarantee Standards''''' applicable to this topic, consult the '''[[RoofStar Guarantee Standards for Asphalt Shingles Roof Systems]]''' in this Manual.		Eave protection is designed to prevent the water from reaching the deck and leaking into the structure. Self-adhesive, rubberized asphalt composite sheet materials are now the standard for eave protection. Properly formulated and installed, these sheets have the potential for long life and great performance . The slope and climate conditions are considerations for selection; for '''''RoofStar Guarantee Standards''''' applicable to this topic, consult the '''[[RoofStar Guarantee Standards for Asphalt Shingles Roof Systems]]''' in this Manual.

−	'''Underlayment''' is used in the field areas of the roof (where eave protection is not required) to provide a secondary protection beneath the shingles during weather events that force water back up the slope underneath the shingles. Nail-applied materials qualify only as underlayment on roof slopes ~~of more~~ than 1:3 (4/12).	+	'''Underlayment''' is used in the field areas of the roof (where eave protection is not required) to provide a secondary protection beneath the shingles during weather events that force water back up the slope underneath the shingles. Nail-applied materials qualify only as underlayment on roof slopes greater than 1:3 (4/12).

← Older revision		Revision as of 21:17, 22 August 2016
Line 11:		Line 11:


−
−	~~[[Section:B. Essential Elements\|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Essential Elements'']]~~

	[[Building Ventilation\|<i class="fa fa-chevron-circle-right fa" ></i> ''Building Ventilation'']]		[[Building Ventilation\|<i class="fa fa-chevron-circle-right fa" ></i> ''Building Ventilation'']]

← Older revision		Revision as of 20:16, 22 August 2016
Line 1:		Line 1:
−	<big><b> Asphalt Shingles, Cedar Shakes & Shingles</b></big>	+	<big><big><big>Asphalt Shingles, Cedar Shakes & Shingles</big></big></big>

	Eave protection is used to protect the eave and valley areas of steep sloped roofs from ice dam damage. An ice dam usually forms when the interior heat of the building warms the snow on the roof, causing it to melt and run down to the eaves. Normally, the eaves are overhanging the building and not heated from the inside. This allows the water to freeze and form an ice dam. As the ice dam grows bigger, it forms a barrier, which prevents water from draining. The water backs up behind the dam and gradually forces its way under the shingles (or shakes, tiles, etc.), through the roof deck, and into the structure. The results can range from minor staining to severe water damage to the structural members.		Eave protection is used to protect the eave and valley areas of steep sloped roofs from ice dam damage. An ice dam usually forms when the interior heat of the building warms the snow on the roof, causing it to melt and run down to the eaves. Normally, the eaves are overhanging the building and not heated from the inside. This allows the water to freeze and form an ice dam. As the ice dam grows bigger, it forms a barrier, which prevents water from draining. The water backs up behind the dam and gradually forces its way under the shingles (or shakes, tiles, etc.), through the roof deck, and into the structure. The results can range from minor staining to severe water damage to the structural members.