Materials:(Bothwell-Accurate) BA-Versaclip (SS 675) - Revision history

James Klassen: /* PERFORMANCE REQUIREMENTS */

2023-10-26T17:07:09Z

‎PERFORMANCE REQUIREMENTS

James Klassen: /* SYSTEM DESCRIPTION */

2023-06-16T15:53:35Z

‎SYSTEM DESCRIPTION

James Klassen: /* OVERVIEW */

2023-06-16T15:52:52Z

‎OVERVIEW

James Klassen at 15:57, 7 June 2023

2023-06-07T15:57:20Z

James Klassen: /* PROFILE */

2023-06-07T15:22:15Z

‎PROFILE

James Klassen: /* TECHNICAL DATA SHEET */

2023-06-07T15:13:41Z

‎TECHNICAL DATA SHEET

James Klassen at 18:03, 15 June 2021

2021-06-15T18:03:27Z

James Klassen: /* PERFORMANCE REQUIREMENTS */

2020-04-28T21:54:28Z

‎PERFORMANCE REQUIREMENTS

James Klassen: /* PROFILE */

2019-02-13T22:48:20Z

‎PROFILE

James Klassen: /* PROFILE */

2019-02-13T22:22:35Z

‎PROFILE

@@ Line 56: / Line 56: @@
 ====PERFORMANCE REQUIREMENTS====
-#'''Wind Uplift Standards''': Engineered designs to resist wind uplift may refer to the British Columbia Building Code, Div. B, Appendix C, Table C-2 which lists various types of loads, including wind loads, for specific reference locations throughout the province. See also [http://{{SERVERNAME}}/index.php?title=ASM_Application_Guides_and_Notes Guides and Notes (Wind Resistance)] for a simplified calculation procedure. Regardless of the resources indicated here, the Design Authority is responsible to perform accurate wind load calculations and specify securement requirements.
+<ol>
-#'''Materials''':RoofStar (RGC) accepted metal panel systems shall be formed of steel conforming to the standards published in the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].
+<li>'''Wind Uplift Resistance''': Panel securement shall conform to the requirements in [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#PART_3 Part 3] of the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].
 <hr>

@@ Line 30: / Line 30: @@
 ====SYSTEM DESCRIPTION====
-#'''General''': The BA-Versaclip (SS675) is a standing seam concealed fastener roof panel. The panel is attached with clips to allow for expansion and contraction. The maximum spacing of the clips and fasteners are 76.2mm (3').
+#'''General''': The BA-Versaclip (SS 675) is a standing seam concealed fastener roof panel. The panel is attached with clips to allow for expansion and contraction. The maximum spacing of the clips and fasteners are 76.2 mm (3').
-#'''Range of application''': Installed on wood or steel sloped roofs, in commercial, institutional, industrial and residential construction. For re-roofing or new construction. BA-Versaclip has the greatest structural properties compared BA-Versasnap (FF100), BA-Versaspan1 (SS100), BA-Versaspan1.5 (SS150).
+#'''Range of application''': Installed on wood or steel sloped roofs, in commercial, institutional, industrial and residential construction. For re-roofing or new construction. BA-Versaclip has the greatest structural properties compared BA-Versasnap (FF 100), BA-Versaspan 100 (SS 100), BA-Versaspan 150 (SS 150).
 #'''Panel Attachment''': Fasteners are fixed through clips that hook onto the male leg of the panel. Spacing is site specific, engineer must confirm fixing specifications.
 #'''Fasteners (Screws)''': Fasteners used to attach panel clips to steel to be No. 10-16 by 25 mm (1") long cadmium plated pancake head No. 2 Phillips drive, No. 3 self-drilling point steel screws. Two screws per clip inserted through 6.25 mm (1/4") diameter guide holes.

@@ Line 25: / Line 25: @@
 ====OVERVIEW====
-The BA-Versaclip (SS675) standing seam panel is formed with an on-site/in-shop continuous metal roofing panel roll forming machine (New Tech SS Multipro). This machine produces a standing seam panel with a seam height of 44.5mm (1.75") and profiles can vary from 304.8mm (12") wide up to 457.2mm (18") wide. This machine also produces FF100 (BA-Versasnap), SS100 (BA-Versaspan1), SS150 (BA-Versaspan1.5)
+The BA-Versaclip (SS 675) standing seam panel is formed with an on-site/in-shop continuous metal roofing panel roll forming machine (New Tech SS Multipro). This machine produces a standing seam panel with a seam height of 44.5 mm (1.75") and profiles can vary from 304.8 mm (12") wide up to 457.2 mm (18") wide. This machine also produces FF 100 (BA-Versasnap), SS 100 (BA-Versaspan 100), SS 150 (BA-Versaspan 150).
 On-site roll forming provides for the elimination of end laps with continuous panel forming capabilities in lengths up to 200' plus (depending on coil size and handling/maneuvering.

@@ Line 1: / Line 1: @@
 __NOTOC__
 __NONUMBEREDHEADINGS__
 {| class="wikitable"
 |-

@@ Line 36: / Line 36: @@
 ! BA-Versaclip (SS 675) Standing Seam Panel
 |-
-| [[File:BA-Versaclip (SS 675) Panel.jpg|frameless|link=http://rpm.rcabc.org/images/d/dd/BA-Versaclip_%28SS_675%29_Panel.jpg|750px]]
+| [[File:BA-Versaclip (SS 675) Panel.jpg|frameless|link=https://rpm.rcabc.org/images/d/dd/BA-Versaclip_%28SS_675%29_Panel.jpg|750px]]
 |}

@@ Line 43: / Line 43: @@
 <div style="width:150px; text-align: left;">
-[[File:Pdf.png|75 px|link=http://rpm.rcabc.org/images/3/33/BA_-_Versaclip_%28SS_675%29_TDS.pdf|'''Technical Data Sheet''']]
+[[File:Pdf.png|75 px|link=https://rpm.rcabc.org/images/4/40/BA_VERSACLIP_SS_675_STANDING_SEAM_TDS.pdf|'''Technical Data Sheet''']]
 </div>

@@ Line 29: / Line 29: @@
 #'''Fasteners (Screws)''': Fasteners used to attach panel clips to steel to be No. 10-16 by 25 mm (1") long cadmium plated pancake head No. 2 Phillips drive, No. 3 self-drilling point steel screws. Two screws per clip inserted through 6.25 mm (1/4") diameter guide holes.
 #'''Panel Clips''': One-piece assembly, No. 22 MSG min thick, 87.5 mm (3-1/2") wide, 47.6 mm (1-7/8 in.) high. One panel clip spaced at 600 mm (24") O.C. for Class 90.
 ====PROFILE====
@@ Line 50: / Line 51: @@
 ====PERFORMANCE REQUIREMENTS====
 #'''Wind Uplift Standards''': Engineered designs to resist wind uplift may refer to the British Columbia Building Code, Div. B, Appendix C, Table C-2 which lists various types of loads, including wind loads, for specific reference locations throughout the province. See also [http://{{SERVERNAME}}/index.php?title=ASM_Application_Guides_and_Notes Guides and Notes (Wind Resistance)] for a simplified calculation procedure. Regardless of the resources indicated here, the Design Authority is responsible to perform accurate wind load calculations and specify securement requirements.
-#'''Materials''':RoofStar (RGC) accepted metal panel systems shall be formed of steel conforming to the standards published in the [http://rpm.rcabc.org/index.php/RoofStar_Guarantee_Standards_for_ASM_Systems RoofStar Guarantee Standards for ASM Systems].
+#'''Materials''':RoofStar (RGC) accepted metal panel systems shall be formed of steel conforming to the standards published in the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].
 <hr>

@@ Line 35: / Line 35: @@
 ! BA-Versaclip (SS 675) Standing Seam Panel
 |-
-| [[File:BA-Versaclip_(SS_675)_Panel.jpg|frameless|link=Architectural Metal Roofing|750px]]
+| [[File:BA-Versaclip (SS 675) Panel.jpg|frameless|link=Architectural Metal Roofing|750px]]
 |}