SBS Canted Edge - Revision history

James Klassen: /* WORK INCLUDED */

2024-07-25T18:03:27Z

‎WORK INCLUDED

James Klassen at 17:57, 27 October 2023

2023-10-27T17:57:31Z

James Klassen: /* WORK INCLUDED */

2022-09-01T19:02:35Z

‎WORK INCLUDED

James Klassen at 18:52, 27 June 2022

2022-06-27T18:52:50Z

James Klassen: James Klassen moved page SBS 10.3.5.3 Canted Edge to SBS Canted Edge

2022-06-27T16:44:58Z

James Klassen moved page SBS 10.3.5.3 Canted Edge to SBS Canted Edge

James Klassen at 16:44, 27 June 2022

2022-06-27T16:44:47Z

James Klassen at 17:05, 10 June 2022

2022-06-10T17:05:32Z

James Klassen at 18:04, 7 September 2021

2021-09-07T18:04:37Z

James Klassen at 18:29, 1 September 2021

2021-09-01T18:29:59Z

James Klassen at 15:40, 30 August 2021

2021-08-30T15:40:14Z

@@ Line 26: / Line 26: @@
 ;(3) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Subject to the requirements of Part 8 in the Standard.
 ;(4) [[SBS Roof Systems Standard#PART_9|'''Base Membrane (field)''']]: Mechanically attached, torch-applied, adhered or self-adhered.  See Table 9.1. in [[SBS Roof Systems Standard#9.2.1.1. Membrane Composition, Thickness, and Selection | Article 9.2.1.1.]] for acceptable membrane types and securement options.  See [[SBS Roof Systems Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]] for application requirements.
-;(5) [[SBS Roof Systems Standard#PART_10|'''Base Membrane (flashing)''']]: Carried vertically up a wall or parapet at least 200 mm (8”), and onto the roof field at least 100 mm (4”) (greater if required by the membrane manufacturer).  Prime substrate, as required by the membrane manufacturer.
+;(5) [[SBS Roof Systems Standard#PART_10|'''Base Membrane (flashing)''']]: Carried over the canted edge and down the outside face at least 50.8 mm (2").  Prime substrate, as required by the membrane manufacturer.
 ;(6) [[SBS Roof Systems Standard#PART_9|'''Cap Membrane (field)''']]: Granule-surfaced membrane.
 ;(7) [[SBS Roof Systems Standard#PART_10|'''Cap Membrane (flashing)''']]: Extended vertically past the termination of the base membrane flashing, to provide a positive seal at the top edge.

@@ Line 17: / Line 17: @@
 [[File:SBS 10.3.5.3 Cant Edge (2).jpg|class=img-responsive | link=http://rpm.rcabc.org/images/9/91/SBS_10.3.5.3_Cant_Edge_%282%29.jpg]]
 </div>
 </div><!-- COL-MD-6 -->
@@ Line 30: / Line 23: @@
 === WORK INCLUDED ===
 ;(1) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layer''']]: Installed following the requirements of '''Part 6''' in this Standard.  Tie in the control layers with membranes installed by other trades, to preserve continuity of the building enclosure ('''1a''').
-;(2) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Installed in staggered and offset layers (not illustrated), and secured in accordance with the design of the system, which is based on the British Columbia Building Code, Part 4 and Part 5, and on '''Part 3''' of the '''''RoofStar Guarantee Standards''''' for the membrane system type.
+;(2) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Installed in staggered and offset layers (not illustrated), and secured in accordance with the design of the system, which is based on the British Columbia Building Code, Part 4 and Part 5, and on '''Part 3''' of the '''''RoofStar Guarantee''''' Standard for the membrane system type.
 ;(3) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Subject to the requirements of Part 8 in the Standard.
 ;(4) [[SBS Roof Systems Standard#PART_9|'''Base Membrane (field)''']]: Mechanically attached, torch-applied, adhered or self-adhered.  See Table 9.1. in [[SBS Roof Systems Standard#9.2.1.1. Membrane Composition, Thickness, and Selection | Article 9.2.1.1.]] for acceptable membrane types and securement options.  See [[SBS Roof Systems Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]] for application requirements.

@@ Line 31: / Line 31: @@
 ;(1) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layer''']]: Installed following the requirements of '''Part 6''' in this Standard.  Tie in the control layers with membranes installed by other trades, to preserve continuity of the building enclosure ('''1a''').
 ;(2) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Installed in staggered and offset layers (not illustrated), and secured in accordance with the design of the system, which is based on the British Columbia Building Code, Part 4 and Part 5, and on '''Part 3''' of the '''''RoofStar Guarantee Standards''''' for the membrane system type.
-;(3) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Subject to the requirements of '''Part 8''' in the '''''RoofStar Guarantee Standards''''' for the membrane system type.
+;(3) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Subject to the requirements of Part 8 in the Standard.
-;(4) [[SBS Roof Systems Standard#PART_9|'''Base Membrane (field)''']]: Mechanically attached, torch-applied, adhered or self-adhered.  See Tables '''9.1''' and '''9.2''' for acceptable membrane types and securement options.  See '''9.3''' for application requirements.
+;(4) [[SBS Roof Systems Standard#PART_9|'''Base Membrane (field)''']]: Mechanically attached, torch-applied, adhered or self-adhered.  See Table 9.1. in [[SBS Roof Systems Standard#9.2.1.1. Membrane Composition, Thickness, and Selection | Article 9.2.1.1.]] for acceptable membrane types and securement options.  See [[SBS Roof Systems Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]] for application requirements.
 ;(5) [[SBS Roof Systems Standard#PART_10|'''Base Membrane (flashing)''']]: Carried vertically up a wall or parapet at least 200 mm (8”), and onto the roof field at least 100 mm (4”) (greater if required by the membrane manufacturer).  Prime substrate, as required by the membrane manufacturer.
-;(6) [[SBS Roof Systems Standard#PART_9|'''Cap Membrane (field)''']]: Granule-surfaced membrane.  See Tables '''9.1''' and '''9.2''' for acceptable cap membrane types and their securement options.  See '''9.3''' for application requirements.
+;(6) [[SBS Roof Systems Standard#PART_9|'''Cap Membrane (field)''']]: Granule-surfaced membrane.
 ;(7) [[SBS Roof Systems Standard#PART_10|'''Cap Membrane (flashing)''']]: Extended vertically past the termination of the base membrane flashing, to provide a positive seal at the top edge.
-;(8) [[SBS Roof Systems Standard#PART_13|'''Metal Cant Flashing''']]: Secure metal flashings with appropriate fasteners set at least 87 mm (3 ½”) above the finished roof surface.  Alternatively, secure flashing from the outside face (illustrated).  See '''13.3.7 Cant Edges''' for metal flashing securement requirements.
+;(8) [[SBS Roof Systems Standard#PART_13|'''Metal Cant Flashing''']]: Secure metal flashings with appropriate fasteners set at least 87 mm (3 ½”) above the finished roof surface.  Alternatively, secure flashing from the outside face (illustrated).
 <hr>

@@ Line 7: / Line 7: @@
 <hr>
 <big><big><big><big><big>SBS | Canted Edge ([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]])</big></big></big></big></big>
-{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center"
+{{Template:Construction Details Header}}
 <div class="panel panel-success">
 <div class="panel-heading"><big>'''SBS Details'''</big></div>

@@ Line 6: / Line 6: @@
 <big><big>Division D - Construction Details</big></big>
 <hr>
-<big><big><big><big><big>SBS 10.3.4.-6 Canted Edge</big></big></big></big></big>
+<big><big><big><big><big>SBS | Canted Edge ([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]])</big></big></big></big></big>
 {| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center"
 | colspan="2"  | <big>'''''Notice to Reader'''''</big>

← Older revision	Revision as of 16:44, 27 June 2022
(No difference)

@@ Line 27: / Line 27: @@
 <div class="col-md-6">
 === WORK INCLUDED ===
-;(1) [[SBS Roof Systems Standard#SBSAIRVAPOUR|'''Air or Vapour Control Layer''']]: Installed following the requirements of '''Part 6''' in this Standard.  Tie in the control layers with membranes installed by other trades, to preserve continuity of the building enclosure ('''1a''').
+;(1) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layer''']]: Installed following the requirements of '''Part 6''' in this Standard.  Tie in the control layers with membranes installed by other trades, to preserve continuity of the building enclosure ('''1a''').
-;(2) [[SBS Roof Systems Standard#SBSINSULATIONAPPLICATION|'''Insulation''']]: Installed in staggered and offset layers (not illustrated), and secured in accordance with the design of the system, which is based on the British Columbia Building Code, Part 4 and Part 5, and on '''Part 3''' of the '''''RoofStar Guarantee Standards''''' for the membrane system type.
+;(2) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Installed in staggered and offset layers (not illustrated), and secured in accordance with the design of the system, which is based on the British Columbia Building Code, Part 4 and Part 5, and on '''Part 3''' of the '''''RoofStar Guarantee Standards''''' for the membrane system type.
-;(3) [[SBS Roof Systems Standard#SBSINSULATIONOVERLAY|'''Insulation Overlay''']]: Subject to the requirements of '''Part 8''' in the '''''RoofStar Guarantee Standards''''' for the membrane system type.
+;(3) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Subject to the requirements of '''Part 8''' in the '''''RoofStar Guarantee Standards''''' for the membrane system type.
-;(4) [[SBS Roof Systems Standard#SBSMEMBRANES|'''Base Membrane (field)''']]: Mechanically attached, torch-applied, adhered or self-adhered.  See Tables '''9.1''' and '''9.2''' for acceptable membrane types and securement options.  See '''9.3''' for application requirements.
+;(4) [[SBS Roof Systems Standard#PART_9|'''Base Membrane (field)''']]: Mechanically attached, torch-applied, adhered or self-adhered.  See Tables '''9.1''' and '''9.2''' for acceptable membrane types and securement options.  See '''9.3''' for application requirements.
-;(5) [[SBS Roof Systems Standard#SBSPERIMETERS|'''Base Membrane (flashing)''']]: Carried vertically up a wall or parapet at least 200 mm (8”), and onto the roof field at least 100 mm (4”) (greater if required by the membrane manufacturer).  Prime substrate, as required by the membrane manufacturer.
+;(5) [[SBS Roof Systems Standard#PART_10|'''Base Membrane (flashing)''']]: Carried vertically up a wall or parapet at least 200 mm (8”), and onto the roof field at least 100 mm (4”) (greater if required by the membrane manufacturer).  Prime substrate, as required by the membrane manufacturer.
-;(6) [[SBS Roof Systems Standard#SBSMEMBRANES|'''Cap Membrane (field)''']]: Granule-surfaced membrane.  See Tables '''9.1''' and '''9.2''' for acceptable cap membrane types and their securement options.  See '''9.3''' for application requirements.
+;(6) [[SBS Roof Systems Standard#PART_9|'''Cap Membrane (field)''']]: Granule-surfaced membrane.  See Tables '''9.1''' and '''9.2''' for acceptable cap membrane types and their securement options.  See '''9.3''' for application requirements.
-;(7) [[SBS Roof Systems Standard#SBSPERIMETERS|'''Cap Membrane (flashing)''']]: Extended vertically past the termination of the base membrane flashing, to provide a positive seal at the top edge.
+;(7) [[SBS Roof Systems Standard#PART_10|'''Cap Membrane (flashing)''']]: Extended vertically past the termination of the base membrane flashing, to provide a positive seal at the top edge.
-;(8) [[SBS Roof Systems Standard#SBSMETALCANT|'''Metal Cant Flashing''']]: Secure metal flashings with appropriate fasteners set at least 87 mm (3 ½”) above the finished roof surface.  Alternatively, secure flashing from the outside face (illustrated).  See '''13.3.7 Cant Edges''' for metal flashing securement requirements.
+;(8) [[SBS Roof Systems Standard#PART_13|'''Metal Cant Flashing''']]: Secure metal flashings with appropriate fasteners set at least 87 mm (3 ½”) above the finished roof surface.  Alternatively, secure flashing from the outside face (illustrated).  See '''13.3.7 Cant Edges''' for metal flashing securement requirements.
 <hr>
 === RELATED WORK BY OTHERS ===
-;(A) [[SBS Roof Systems Standard#SBSDECKS|'''Acceptable Deck''']]
+;(A) [[SBS Roof Systems Standard#PART_2|'''Acceptable Deck''']]
 ;(B) '''Cant and Fascia Woodwork'''
 </div><!-- COL-6-MD -->

@@ Line 49: / Line 49: @@
 <hr>
-[[SBS Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''SBS-modified Bitumen Membrane Roof System Details'']]
+[[SBS Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''"SBS" Roof System Details'']]
 [[Main Page | <i class="fa fa-home fa"></i> Home]]
 {{Tempate:RPM Page Footer with Copyright and Current Date}}