SBS Plumbing Vent (Conventional Roof System) - Revision history

James Klassen: /* WORK INCLUDED */

2025-11-06T23:27:11Z

‎WORK INCLUDED

James Klassen at 22:10, 6 November 2025

2025-11-06T22:10:32Z

James Klassen at 21:53, 6 November 2025

2025-11-06T21:53:33Z

James Klassen: /* WORK INCLUDED */

2023-10-27T18:15:30Z

‎WORK INCLUDED

James Klassen: James Klassen moved page SBS Plumbing Vent to SBS Plumbing Vent (Conventional Roof System)

2022-06-27T18:27:53Z

James Klassen moved page SBS Plumbing Vent to SBS Plumbing Vent (Conventional Roof System)

James Klassen at 18:27, 27 June 2022

2022-06-27T18:27:34Z

James Klassen: James Klassen moved page SBS 11.3.3.3-1 Penetration Flashings (plumbing vent) to SBS Plumbing Vent

2022-06-27T18:27:04Z

James Klassen moved page SBS 11.3.3.3-1 Penetration Flashings (plumbing vent) to SBS Plumbing Vent

James Klassen at 18:26, 27 June 2022

2022-06-27T18:26:28Z

James Klassen at 18:12, 7 September 2021

2021-09-07T18:12:36Z

James Klassen at 21:43, 1 September 2021

2021-09-01T21:43:49Z

@@ Line 25: / Line 25: @@
 ;(4) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Multiple layering shown (Refer to '''Part 7''' for design, material, and installation requirements).
 ;(5) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: As required by the RGC Standard; see '''Part 8''' for design, material, and installation requirements. Additionally, an overlay is required is included in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'', or a custom-engineered assembly.
-;(6) [[SBS Roof Systems Standard#PART_9|'''Field Base Sheet Membrane''']]: Selected to conform to the requirements in [https://rpm.rcabc.org/index.php?title=SBS_Roof_Systems_Standard#9.2.1.1. Membrane Composition, Thickness, and Selection '''Table 9.2.1.1.'''] and conforming to the options or requirements in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'', or a custom-engineered assembly.
+;(6) [[SBS Roof Systems Standard#PART_9|'''Field Base Sheet Membrane''']]: Selected to conform to the requirements in [https://rpm.rcabc.org/index.php?title=SBS_Roof_Systems_Standard#9.2.1.1._Membrane_Composition,_Thickness,_and_Selection '''Table 9.2.1.1.'''] and conforming to the options or requirements in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'', or a custom-engineered assembly.
 ;(7) [[SBS Roof Systems Standard#PART_12 | '''Penetration Flashing''']]: Purpose-made non-ferrous plumbing vent flashing with separate settlement cap (Item 11), sized to fit the penetration, bedded in a membrane-compatible mastic, and installed with screw fasteners. Aluminum flashings are required for torch-applied ''roof systems''.
 ;(8) [[SBS Roof Systems Standard#PART_12 | '''Membrane Target Patch''']]: Sized to extend at least 101.6 mm (4”) past the edge of the penetration flashing flange and sealed to the field membrane and primed flange.

@@ Line 50: / Line 50: @@
 [[SBS Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''"SBS" Roof System Details'']]
-[[Main Page | <i class="fa fa-home fa"></i> Home]]
+[[RCABC Roofing Practices Manual | <i class="fa fa-home fa"></i> Home]]
 {{Tempate:RPM Page Footer with Copyright and Current Date}}

@@ Line 13: / Line 13: @@
 <div class="col-md-6">
 <div style="text-align:center; vertical-align:center">
-[[File:10.3.5.5.jpg| link=http://rpm.rcabc.org/images/f/f9/10.3.5.5.jpg | class=img-responsive]]
+<br>
 </div>
 </div><!-- COL-MD-6 -->
@@ Line 19: / Line 20: @@
 <div class="col-md-6">
 === WORK INCLUDED ===
-;(1) [[SBS Roof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: If required by ''Design Authority''.
+;(1) [[SBS Roof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: If specified and included in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'', or a custom-engineered assembly.
-;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: If required by ''Design Authority''.
+;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: As required by ''Design Authority''.
-;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically fastened.  See available insulation products in the [[Division C| Accepted Materials]] Division of this ''Manual''.
+;(3) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layer Tie-in''']]: Illustrated to show AVB continuity with penetration.
-;(4) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]:
+;(4) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Multiple layering shown (Refer to '''Part 7''' for design, material, and installation requirements).
-;(5) [[SBS Roof Systems Standard#PART_9|'''Primary Membrane''']] and [[SBS Roof Systems Standard#PART_9| '''Membrane Protection''']]
+;(5) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: As required by the RGC Standard; see '''Part 8''' for design, material, and installation requirements. Additionally, an overlay is required is included in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'', or a custom-engineered assembly.
-;(6) '''Mastic''': As approved by manufacturer.
+;(6) [[SBS Roof Systems Standard#PART_9|'''Field Base Sheet Membrane''']]: Selected to conform to the requirements in [https://rpm.rcabc.org/index.php?title=SBS_Roof_Systems_Standard#9.2.1.1. Membrane Composition, Thickness, and Selection '''Table 9.2.1.1.'''] and conforming to the options or requirements in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'', or a custom-engineered assembly.
-;(7) [[SBS Roof Systems Standard#PART_10|'''Membrane Flashing''']]: Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
+;(7) [[SBS Roof Systems Standard#PART_12 | '''Penetration Flashing''']]: Purpose-made non-ferrous plumbing vent flashing with separate settlement cap (Item 11), sized to fit the penetration, bedded in a membrane-compatible mastic, and installed with screw fasteners. Aluminum flashings are required for torch-applied ''roof systems''.
-;(8) '''Storm Collar, Typical Lead Cap or Typical Aluminum Cap''': Re-roofing only. Non- bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamps for use with pipes that extend above flashing.
+;(8) [[SBS Roof Systems Standard#PART_12 | '''Membrane Target Patch''']]: Sized to extend at least 101.6 mm (4”) past the edge of the penetration flashing flange and sealed to the field membrane and primed flange.
 <hr>
 === RELATED WORK BY OTHERS ===
-;(A) [[SBS Roof Systems Standard#PART_2|'''Acceptable Supporting Deck Structure''']]
+;(A) [[SBS Roof Systems Standard#PART_2|'''Supporting (Structural) Roof Deck''']]: Steel deck illustrated.
-;(B) '''Plumbing Stack''': Extend to match top of metal flashing.  Aluminum flashings are required for torch-applied roof systems.
+;(B) '''Plumbing Penetration''': Extend to match top of metal flashing.
 </div><!-- COL-6-MD -->
 </div><!-- PANEL BODY -->

@@ Line 21: / Line 21: @@
 ;(1) [[SBS Roof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: If required by ''Design Authority''.
 ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: If required by ''Design Authority''.
-;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically fastened.  See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
+;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically fastened.  See available insulation products in the [[Division C| Accepted Materials]] Division of this ''Manual''.
 ;(4) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]:
 ;(5) [[SBS Roof Systems Standard#PART_9|'''Primary Membrane''']] and [[SBS Roof Systems Standard#PART_9| '''Membrane Protection''']]

@@ Line 6: / Line 6: @@
 <big><big>Division D - Construction Details</big></big>
 <hr>
-<big><big><big><big><big>SBS | Penetration Flashings (Plumbing Vent) ([[SBS_Roof_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big>
+<big><big><big><big><big>SBS | Plumbing Vent (Conventional Roof System) ([[SBS_Roof_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big>
 {{Template:Construction Details Header}}
 <div class="panel panel-success">

← Older revision	Revision as of 18:27, 27 June 2022
(No difference)

@@ Line 1: / Line 1: @@
 {{Template:RPM Info}}
 <hr>
 {| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center"
 | colspan="2"  | <big>'''''Notice to Reader'''''</big>

@@ Line 17: / Line 17: @@
 <div class="col-md-6">
 === WORK INCLUDED ===
-;(1) [[SBS Roof Systems Standard#SBSSUBSTRATES|'''Supporting Deck Overlay''']]: If required by design authority.
+;(1) [[SBS Roof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: If required by ''Design Authority''.
-;(2) [[SBS Roof Systems Standard#SBSAIRVAPOUR|'''Air or Vapour Control Layers''']]: If required by design authority.
+;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: If required by ''Design Authority''.
-;(3) [[SBS Roof Systems Standard#SBSINSULATION|'''Insulation''']]: Mechanically fastened.  See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
+;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically fastened.  See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
-;(4) [[SBS Roof Systems Standard#SBSINSULATIONOVERLAY|'''Insulation Overlay''']]:
+;(4) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]:
-;(5) [[SBS Roof Systems Standard#SBSBASE|'''Primary Membrane''']] and [[SBS Roof Systems Standard#SBSPROTECTION| '''Membrane Protection''']]
+;(5) [[SBS Roof Systems Standard#PART_9|'''Primary Membrane''']] and [[SBS Roof Systems Standard#PART_9| '''Membrane Protection''']]
 ;(6) '''Mastic''': As approved by manufacturer.
-;(7) [[SBS Roof Systems Standard#SBS-STRIPPING|'''Membrane Flashing''']]: Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
+;(7) [[SBS Roof Systems Standard#PART_10|'''Membrane Flashing''']]: Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
 ;(8) '''Storm Collar, Typical Lead Cap or Typical Aluminum Cap''': Re-roofing only. Non- bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamps for use with pipes that extend above flashing.
@@ Line 29: / Line 29: @@
 === RELATED WORK BY OTHERS ===
-;(A) [[SBS Roof Systems Standard#SBSDECKS|'''Acceptable Supporting Deck Structure''']]
+;(A) [[SBS Roof Systems Standard#PART_2|'''Acceptable Supporting Deck Structure''']]
 ;(B) '''Plumbing Stack''': Extend to match top of metal flashing.  Aluminum flashings are required for torch-applied roof systems.
 ;(C) '''Wood Blocking''': Optional.
-;(D) [[SBS Roof Systems Standard#SBSPENETRATIONFLASHING|'''Metal Flashing''']]: Apply in a bed of mastic. Fastened over membrane to wood blocking or roof deck.
+;(D) [[SBS Roof Systems Standard#PART_11|'''Metal Flashing''']]: Apply in a bed of mastic. Fastened over membrane to wood blocking or roof deck.
-;(E) '''Typical Aluminum Cap''': For use with aluminum flashing.   See requirements for [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSSETTLEMENT|'''Settlement Caps''']] on strip-in plumbing flashings.
+;(E) '''Typical Aluminum Cap''': For use with aluminum flashing.   See requirements for [[SBS Roof Systems Standard#PART_11|'''Settlement Caps''']] on strip-in plumbing flashings.
 ;(F) '''Typical Lead Cap''': For use with lead flashing.
 ;(G) '''Storm Collar''': Non-Bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamp. Use with pipes that extend above flashings.