Template:AARS Membrane - SBS 2-Ply Base - Revision history

James Klassen at 14:33, 7 April 2020

2020-04-07T14:33:11Z

James Klassen: James Klassen moved page Template:AARS Membrane - 2-Ply Base to Template:AARS Membrane - SBS 2-Ply Base

2019-11-04T18:47:44Z

James Klassen moved page Template:AARS Membrane - 2-Ply Base to Template:AARS Membrane - SBS 2-Ply Base

James Klassen at 21:21, 29 June 2018

2018-06-29T21:21:27Z

James Klassen at 18:06, 29 June 2018

2018-06-29T18:06:02Z

James Klassen at 21:27, 21 July 2017

2017-07-21T21:27:33Z

Show changes

James Klassen at 19:08, 18 July 2017

2017-07-18T19:08:41Z

James Klassen at 19:03, 18 July 2017

2017-07-18T19:03:36Z

James Klassen at 18:52, 18 July 2017

2017-07-18T18:52:02Z

James Klassen at 19:14, 23 May 2017

2017-05-23T19:14:24Z

James Klassen at 16:13, 27 April 2017

2017-04-27T16:13:03Z

← Older revision		Revision as of 14:33, 7 April 2020
Line 1:		Line 1:
−	~~:'''How to use the table'''~~
−
−	#In the table below look for <u>maximum wind uplift values that equal or exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
−	#Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
−	#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report. In the absence of published alternates, consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
−
	<div class="table-responsive">		<div class="table-responsive">
	<table class="table">		<table class="table">

@@ Line 1: / Line 1: @@
 :'''How to use the table'''
-#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
+#In the table below look for <u>maximum wind uplift values that equal or exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
 #In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
 <div class="table-responsive">

@@ Line 1: / Line 1: @@
-<div class="table-responsive">
+:'''How to use the table'''
-#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
+#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
-#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates, locate a possible alternate in the [http://rpm
+#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and
 </div>

@@ Line 4: / Line 4: @@
 |+	How to use the table:
-#In the table below look for maximum <u>wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
+#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
 #In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates, locate a possible alternate in the [http://rpm.rcabc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual.  If you are unsure about compatibility, contact the [mailto:guarantees@rcabc.org '''RCABC'''].

@@ Line 4: / Line 4: @@
 |+	How to use the table:
-#Expand the table for the membrane type and look for maximum <u>wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
+#In the table below look for maximum <u>wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
 #In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates, locate a possible alternate in the [http://rpm.rcabc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual.  If you are unsure about compatibility, contact the [mailto:guarantees@rcabc.org '''RCABC'''].

← Older revision	Revision as of 18:47, 4 November 2019
(No difference)

@@ Line 2: / Line 2: @@
    <table class="table">
 {|	class="wikitable sortable collapsible collapsed;" style="margin-left: 20pt; margin-right: auto; border: none;"
-|+	Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
+|+	How to use the table:
 !	style="vertical-align:top;"	|	Manufacturer
 !	style="vertical-align:top;"	|	Product Name

@@ Line 36: / Line 36: @@
 |-
 ||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene 180 S|Sopralene 180 S]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System	||	style="text-align:center;"|	----<br>----<br>----	||	style="text-align:center;"|	-3.00<br>-2.40<br>-3.00	||	style="text-align:center;"|	----<br>----<br>----	||	style="text-align:center;"|	-63.00<br>-50.00<br>-62.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel    	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/a/a6/SOP-AARS4.pdf  '''AARS Test Report 4''']<br>[http://rpm.rcabc.org/images/1/1d/SOP-AARS5.pdf  '''AARS Test Report 5''']<br>[http://rpm.rcabc.org/images/2/24/SOP-AARS9.pdf '''AARS Test Report 9''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU212868<br>PUB-DRU210983<br>PUB-DRU229544
 |-
 ||	'''[[Soprema Inc.]]'''	||	[[Materials:Elastophene 180 PS |Elastophene 180 PS ]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System	||	style="text-align:center;"|	----<br>----<br>----	||	style="text-align:center;"|	-3.00<br>-2.40<br>-3.00	||	style="text-align:center;"|	----<br>----<br>----	||	style="text-align:center;"|	-63.00<br>-50.00<br>-62.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel    	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/a/a6/SOP-AARS4.pdf  '''AARS Test Report 4''']<br>[http://rpm.rcabc.org/images/1/1d/SOP-AARS5.pdf  '''AARS Test Report 5''']<br>[http://rpm.rcabc.org/images/2/24/SOP-AARS9.pdf '''AARS Test Report 9''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU212868<br>PUB-DRU210983<br>PUB-DRU229544
@@ Line 51: / Line 53: @@
 ||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 180|Sopralene Flam 180]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>2 Tested Systems<br>1 Tested System<br>3 Tested Systems<br>2 Tested Systems	||	style="text-align:center;"|	----<br> ----<br>----<br>-3.40<br>----<br>-2.40<br>-1.90	||	style="text-align:center;"|	-4.30<br>-2.70<br>-4.30<br>-4.80<br>-3.00<br>-4.60<br>-3.90	||	style="text-align:center;"|	----<br>----<br>----<br>-72.00<br>----<br>-50.00<br>-40.00	||	style="text-align:center;"|	-87.30<br>-55.50<br>-90.00<br>-100.00<br>-62.00<br>-96.00<br>-83.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Steel<br>Steel<br>Steel<br>Steel   	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/b/b0/SOP-AARS1.pdf  '''AARS Test Report 1''']<br>[http://rpm.rcabc.org/images/9/96/SOP-AARS2.pdf '''AARS Test Report 2''']<br>[http://rpm.rcabc.org/images/4/45/SOP-AARS7.pdf  '''AARS Test Report 7''']<br>[http://rpm.rcabc.org/images/4/44/SOP-AARS8.pdf  '''AARS Test Report 8''']<br>[http://rpm.rcabc.org/images/2/24/SOP-AARS9.pdf '''AARS Test Report 9''']<br>[http://rpm.rcabc.org/images/6/67/SOP-AARS10.pdf  '''AARS Test Report 10''']<br>[http://rpm.rcabc.org/images/f/f8/SOP-AARS11.pdf   '''AARS Test Report 11''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	RP-DRU210754<br>RAP-DRU240663<br>PUB-DRC303964<br>PUB-DRU240661<br>PUB-DRU228011<br>PUB-DRU229544<br>PUB-DRU220544
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 250 |Sopralene Flam 250 ]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>2 Tested Systems<br>1 Tested System<br>3 Tested Systems<br>2 Tested Systems	||	style="text-align:center;"|	----<br>----<br>----<br>-3.40<br>---<br>-2.40<br>-1.90	||	style="text-align:center;"|	-4.30<br>-2.70<br>-4.30<br>-4.80<br>-3.00<br>-4.60<br>-3.90	||	style="text-align:center;"|	----<br>----<br>----<br>-72.00<br>----<br>-50.00<br>-40.00	||	style="text-align:center;"|	-87.30<br>-55.50<br>-90.00<br>-100.00<br>-62.00<br>-96.00<br>-83.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Steel<br>Steel<br>Steel<br>Steel   	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/b/b0/SOP-AARS1.pdf  '''AARS Test Report 1''']<br>[http://rpm.rcabc.org/images/9/96/SOP-AARS2.pdf '''AARS Test Report 2''']<br>[http://rpm.rcabc.org/images/4/45/SOP-AARS7.pdf  '''AARS Test Report 7''']<br>[http://rpm.rcabc.org/images/4/44/SOP-AARS8.pdf  '''AARS Test Report 8''']<br>[http://rpm.rcabc.org/images/2/24/SOP-AARS9.pdf '''AARS Test Report 9''']<br>[http://rpm.rcabc.org/images/6/67/SOP-AARS10.pdf  '''AARS Test Report 10''']<br>[http://rpm.rcabc.org/images/f/f8/SOP-AARS11.pdf   '''AARS Test Report 11''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	RP-DRU210754<br>RAP-DRU240663<br>PUB-DRC303964<br>PUB-DRU240661<br>PUB-DRU229544<br>PUB-DRU220544
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 250 |Sopralene Flam 250 ]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>2 Tested Systems<br>1 Tested System<br>3 Tested Systems<br>2 Tested Systems	||	style="text-align:center;"|	----<br>----<br>----<br>-3.40<br>---<br>-2.40<br>-1.90	||	style="text-align:center;"|	-4.30<br>-2.70<br>-4.30<br>-4.80<br>-3.00<br>-4.60<br>-3.90	||	style="text-align:center;"|	----<br>----<br>----<br>-72.00<br>----<br>-50.00<br>-40.00	||	style="text-align:center;"|	-87.30<br>-55.50<br>-90.00<br>-100.00<br>-62.00<br>-96.00<br>-83.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Steel<br>Steel<br>Steel<br>Steel   	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/b/b0/SOP-AARS1.pdf  '''AARS Test Report 1''']<br>[http://rpm.rcabc.org/images/9/96/SOP-AARS2.pdf '''AARS Test Report 2''']<br>[http://rpm.rcabc.org/images/4/45/SOP-AARS7.pdf  '''AARS Test Report 7''']<br>[http://rpm.rcabc.org/images/4/44/SOP-AARS8.pdf  '''AARS Test Report 8''']<br>[http://rpm.rcabc.org/images/2/24/SOP-AARS9.pdf '''AARS Test Report 9''']<br>[http://rpm.rcabc.org/images/6/67/SOP-AARS10.pdf  '''AARS Test Report 10''']<br>[http://rpm.rcabc.org/images/f/f8/SOP-AARS11.pdf   '''AARS Test Report 11''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	RP-DRU210754<br>RAP-DRU240663<br>PUB-DRC303964<br>PUB-DRU240661<br>PUB-DRU228011<br>PUB-DRU229544<br>PUB-DRU220544
 |-
 ||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Base 510 |Sopraply Base 510]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-3.00	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-62.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	  [http://rpm.rcabc.org/images/2/24/SOP-AARS9.pdf '''AARS Test Report 9''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU228011