Template:PARS Membrane - SBS 2-Ply Base - Revision history

James Klassen at 22:51, 6 April 2020

2020-04-06T22:51:22Z

James Klassen: James Klassen moved page Template:PARS Membrane - 2-Ply Base to Template:PARS Membrane - SBS 2-Ply Base

2019-11-04T18:28:20Z

James Klassen moved page Template:PARS Membrane - 2-Ply Base to Template:PARS Membrane - SBS 2-Ply Base

James Klassen at 22:02, 29 June 2018

2018-06-29T22:02:00Z

Show changes

James Klassen at 21:21, 29 June 2018

2018-06-29T21:21:58Z

James Klassen at 18:00, 29 June 2018

2018-06-29T18:00:11Z

Show changes

James Klassen at 17:50, 29 June 2018

2018-06-29T17:50:37Z

James Klassen at 16:30, 27 June 2018

2018-06-27T16:30:02Z

James Klassen at 22:24, 21 July 2017

2017-07-21T22:24:45Z

James Klassen at 18:36, 21 July 2017

2017-07-21T18:36:14Z

James Klassen at 18:22, 21 July 2017

2017-07-21T18:22:48Z

← Older revision		Revision as of 22:51, 6 April 2020
Line 1:		Line 1:
−	~~:'''How to use the table'''~~
−
−	#In the table below look for <u>maximum wind uplift values that equal or exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
−	#Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
−	#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report. In the absence of published alternates, consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
−
	<div class="table-responsive">		<div class="table-responsive">
	<table class="table">		<table class="table">

@@ Line 1: / Line 1: @@
 :'''How to use the table'''
-#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
+#In the table below look for <u>maximum wind uplift values that equal or exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
 #In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.

@@ Line 1: / Line 1: @@
-<div class="table-responsive">
+:'''How to use the table'''
-#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
+#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
-#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates, locate a possible alternate in the [http
+#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program'''
 </div>

@@ Line 29: / Line 29: @@
 ||	'''[[Firestone Building Products]]'''	||	[[Materials:BaseGard SA |BaseGard SA]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-2.10	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-45.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/7/7f/FSTONE-PARS1.pdf  '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
 |-
-||	'''[[Henry Company Canada]]'''	||	[[Materials:Modified Plus NP180 Tack|Modified Plus NP180 Tack]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-4.67	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-97.50	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/f/fe/HENRY-PARS1.pdf '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
+||	'''[[Henry Company Canada]]'''	||	[[Materials:Modified Plus NP180 Tack|Modified Plus NP180 Tack]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-4.67	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-97.50	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/f/fe/HENRY-PARS1.pdf  '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
 |-
 ||	'''[[Siplast]]'''	||	[[Materials:Paradiene 20|Paradiene 20]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>1 Tested System	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-2.23<br>-3.35<br>-2.87<br>-2.90	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-46.67<br>-70.00<br>-60.00<br>-60.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/c/cd/SIP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/9/9f/SIP-PARS4.pdf  '''PARS Test Report 4''']<br>[http://rpm.rcabc.org/images/6/69/SIP-PARS5.pdf  '''PARS Test Report 5''']<br>[http://rpm.rcabc.org/images/0/0e/SIP-PARS8.pdf '''PARS Test Report 8'''] 	||	style="text-align:center;"|	Intertek<br>Intertek<br>Intertek<br>exp. Service Inc.	||	style="text-align:center;"|	E9988.03-109-44<br>E9988.05-109-44<br>E9988.06-109-44<br>SIPZ-DRS-00215482-01-5100

@@ Line 29: / Line 29: @@
 ||	'''[[Firestone Building Products]]'''	||	[[Materials:BaseGard SA |BaseGard SA]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-2.10	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-45.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/7/7f/FSTONE-PARS1.pdf  '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
 |-
-||	'''[[Henry Company Canada]]'''	||	[[Materials:Modified Plus NP180 Tack|Modified Plus NP180 Tack]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-4.67	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-97.50	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/7/7f/FSTONE-PARS1.pdf  '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
+||	'''[[Henry Company Canada]]'''	||	[[Materials:Modified Plus NP180 Tack|Modified Plus NP180 Tack]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-4.67	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-97.50	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/f/fe/HENRY-PARS1.pdf '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
 |-
 ||	'''[[Siplast]]'''	||	[[Materials:Paradiene 20|Paradiene 20]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>1 Tested System	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-2.23<br>-3.35<br>-2.87<br>-2.90	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-46.67<br>-70.00<br>-60.00<br>-60.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/c/cd/SIP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/9/9f/SIP-PARS4.pdf  '''PARS Test Report 4''']<br>[http://rpm.rcabc.org/images/6/69/SIP-PARS5.pdf  '''PARS Test Report 5''']<br>[http://rpm.rcabc.org/images/0/0e/SIP-PARS8.pdf '''PARS Test Report 8'''] 	||	style="text-align:center;"|	Intertek<br>Intertek<br>Intertek<br>exp. Service Inc.	||	style="text-align:center;"|	E9988.03-109-44<br>E9988.05-109-44<br>E9988.06-109-44<br>SIPZ-DRS-00215482-01-5100

← Older revision	Revision as of 18:28, 4 November 2019
(No difference)

@@ Line 37: / Line 37: @@
 ||	'''[[Siplast]]'''	||	[[Materials:Paradiene 20 SA |Paradiene 20 SA]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-1.90	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-40.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/3/36/SIP-PARS1.pdf  '''PARS Test Report 1''']	||	style="text-align:center;"|	Intertek	||	style="text-align:center;"|	E9988.01-109-44
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Elastophene Flam|Elastophene Flam]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.900<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Elastophene Flam|Elastophene Flam]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.900<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
 |-
 ||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraflash Flam Stick|Sopraflash Flam Stick]]	||	style="text-align:center;"|	3 Tested Systems	||	style="text-align:center;"|	-1.40	||	style="text-align:center;"|	-2.80	||	style="text-align:center;"|	-30.00	||	style="text-align:center;"|	-58.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/3/34/SOP-PARS1.pdf '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU305544
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 180|Sopralene Flam 180]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems	||	style="text-align:center;"|	----<br>-1.40	||	style="text-align:center;"|	-2.90<br>-3.40	||	style="text-align:center;"|	----<br>-30.00	||	style="text-align:center;"|	-60.00<br>-70.00	||	style="text-align:center;"|	Plywood<br>Steel 	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3'''] 	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 180|Sopralene Flam 180]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems	||	style="text-align:center;"|	----<br>-1.40	||	style="text-align:center;"|	-2.90<br>-3.40	||	style="text-align:center;"|	----<br>-30.00	||	style="text-align:center;"|	-60.00<br>-70.00	||	style="text-align:center;"|	Steel<br>Steel 	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3'''] 	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 250 |Sopralene Flam 250 ]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.90<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 250 |Sopralene Flam 250 ]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.90<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Base 520 |Sopraply Base 520]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.90<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Base 520 |Sopraply Base 520]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.90<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
 |-
 |}
    </table>
 </div>

@@ Line 2: / Line 2: @@
 <table class="table">
 {|	class="wikitable sortable collapsible collapsed;" style="margin-left: 20pt; margin-right: auto; border: none;"
 |+	How to use the table:
 #In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
@@ Line 33: / Line 33: @@
 ||	'''[[Siplast]]'''	||	[[Materials:Paradiene 20|Paradiene 20]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>1 Tested System	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-2.23<br>-3.35<br>-2.87<br>-2.90	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-46.67<br>-70.00<br>-60.00<br>-60.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/c/cd/SIP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/9/9f/SIP-PARS4.pdf  '''PARS Test Report 4''']<br>[http://rpm.rcabc.org/images/6/69/SIP-PARS5.pdf  '''PARS Test Report 5''']<br>[http://rpm.rcabc.org/images/0/0e/SIP-PARS8.pdf '''PARS Test Report 8'''] 	||	style="text-align:center;"|	Intertek<br>Intertek<br>Intertek<br>exp. Service Inc.	||	style="text-align:center;"|	E9988.03-109-44<br>E9988.05-109-44<br>E9988.06-109-44<br>SIPZ-DRS-00215482-01-5100
 |-
-||	'''[[Siplast]]'''	||	[[Materials:Paradiene 20 TG|Paradiene 20 TG]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>1 Tested System	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-1.40<br> -1.80<br>-2.86<br>-1.46	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-30.00<br>-37.00<br>-60.00<br>-30.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel<br>Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/3/32/SIP-PARS2.pdf '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/1/1c/SIP-PARS6.pdf '''PARS Test Report 6''']<br>[http://rpm.rcabc.org/images/a/a9/SIP-PARS7.pdf '''PARS Test Report 7''']<br>[http://rpm.rcabc.org/images/d/dc/SIP-PARS9.pdf '''PARS Test Report 9''']	||	style="text-align:center;"|	Intertek<br>exp. Service Inc.<br>exp. Service Inc.<br>exp. Service Inc.	||	style="text-align:center;"|	 E998.02-109-44<br>SIPZ-DRS-00221706-02-5100<br>SIPZ-DRS-00221706-01-5100<br>SIPZ-DRS-00221706-03-5100
+||	'''[[Siplast]]'''	||	[[Materials:Paradiene 20 TG|Paradiene 20 TG]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>1 Tested System	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-1.40<br> -1.80<br>-2.86<br>-1.46	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-30.00<br>-37.00<br>-60.00<br>-30.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel<br>Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/3/32/SIP-PARS2.pdf '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/1/1c/SIP-PARS6.pdf '''PARS Test Report 6''']<br>[http://rpm.rcabc.org/images/a/a9/SIP-PARS7.pdf '''PARS Test Report 7''']<br>[http://rpm.rcabc.org/images/d/dc/SIP-PARS9.pdf '''PARS Test Report 9''']	||	style="text-align:center;"|	Intertek<br>exp. Service Inc.<br>exp. Service Inc.<br>exp. Service Inc.	||	style="text-align:center;"|	E998.02-109-44<br>SIPZ-DRS-00221706-02-5100<br>SIPZ-DRS-00221706-01-5100<br>SIPZ-DRS-00221706-03-5100
 |-
 ||	'''[[Siplast]]'''	||	[[Materials:Paradiene 20 SA |Paradiene 20 SA]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-1.90	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-40.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/3/36/SIP-PARS1.pdf  '''PARS Test Report 1''']	||	style="text-align:center;"|	Intertek	||	style="text-align:center;"|	E9988.01-109-44
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Elastophene Flam|Elastophene Flam]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-1.40<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-30.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Elastophene Flam|Elastophene Flam]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.900<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
 |-
 ||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraflash Flam Stick|Sopraflash Flam Stick]]	||	style="text-align:center;"|	3 Tested Systems	||	style="text-align:center;"|	-1.40	||	style="text-align:center;"|	-2.80	||	style="text-align:center;"|	-30.00	||	style="text-align:center;"|	-58.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/3/34/SOP-PARS1.pdf '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU305544
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 180|Sopralene Flam 180]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems	||	style="text-align:center;"|	----<br>-1.40	||	style="text-align:center;"|	-1.40<br>-3.40	||	style="text-align:center;"|	----<br>-30.00	||	style="text-align:center;"|	-30.00<br>-70.00	||	style="text-align:center;"|	Plywood<br>Steel 	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3'''] 	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 180|Sopralene Flam 180]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems	||	style="text-align:center;"|	----<br>-1.40	||	style="text-align:center;"|	-2.90<br>-3.40	||	style="text-align:center;"|	----<br>-30.00	||	style="text-align:center;"|	-60.00<br>-70.00	||	style="text-align:center;"|	Plywood<br>Steel 	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3'''] 	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 250 |Sopralene Flam 250 ]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-1.40<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-30.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 250 |Sopralene Flam 250 ]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.90<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Base 520 |Sopraply Base 520]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-1.40<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-30.00<br>-70.00<br>-105.0	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Base 520 |Sopraply Base 520]]	||	style="text-align:center;"|	1 Tested System<br>4 Tested Systems<br>3 Tested Systems	||	style="text-align:center;"|	----<br>-1.40<br>-2.10	||	style="text-align:center;"|	-2.90<br>-3.40<br>-5.00	||	style="text-align:center;"|	----<br>-30.00<br>-45.00	||	style="text-align:center;"|	-60.00<br>-70.00<br>-105.00	||	style="text-align:center;"|	Plywood<br>Steel<br>Steel      	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/6/60/SOP-PARS2.pdf  '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/b/b7/SOP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/2/2b/SOP-PARS5.pdf  '''PARS Test Report 5''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU293332<br>PUB-DRU304337<br>PUB-DRU293389
 |-
 |}
    </table>
 </div>