Working Page 10 - Revision history

James Klassen: /* Part 9 (Continued) */

2026-02-04T21:10:34Z

‎Part 9 (Continued)

James Klassen: /* Part 9 - Roof Field (Panel Systems) */

2026-02-04T21:10:17Z

‎Part 9 - Roof Field (Panel Systems)

James Klassen at 21:45, 3 February 2026

2026-02-03T21:45:13Z

James Klassen: /* Securing Panels on Slopes 1:3 and Greater ( Article 9.3.2.6.) */

2026-02-03T21:43:24Z

‎Securing Panels on Slopes 1:3 and Greater ( Article 9.3.2.6.)

James Klassen: /* Securing Panels on Slopes 1:3 and Greater ( Article 9.3.2.6.) */

2026-02-03T21:43:04Z

‎Securing Panels on Slopes 1:3 and Greater ( Article 9.3.2.6.)

James Klassen: /* Securing Panels on Slopes 1:6 to up to 1:3 ( Article 9.3.2.5.) */

2026-02-03T21:42:49Z

‎Securing Panels on Slopes 1:6 to up to 1:3 ( Article 9.3.2.5.)

James Klassen: /* Securing Panels on Slopes 1:6 to up to 1:3 ( Article 9.3.2.5.) */

2026-02-03T21:40:26Z

‎Securing Panels on Slopes 1:6 to up to 1:3 ( Article 9.3.2.5.)

James Klassen: /* Panels Over Ventilation Materials or Voids: Slopes ≥ 1:3 ( Article 9.3.2.5.) */

2026-02-03T21:34:07Z

‎Panels Over Ventilation Materials or Voids: Slopes ≥ 1:3 ( Article 9.3.2.5.)

James Klassen: /* Part 9 - Roof Field (Panel Systems) */

2026-02-03T21:33:01Z

‎Part 9 - Roof Field (Panel Systems)

James Klassen at 22:14, 2 February 2026

2026-02-02T22:14:35Z

@@ Line 60: / Line 60: @@
 ===Part 9 (Continued)===
-====='''<big>Securing Panels on Slopes 1:3 and Greater</big>''' ([[ASM_Roof_Systems_Standard#9.3.2.6._Securing_Panels_on_Slopes_1:3_and_Greater  | Article 9.3.2.6.]])=====
+====='''<big>Securing Panel Systems on Slopes 1:3 and Greater</big>''' ([[ASM_Roof_Systems_Standard#9.3.2.6._Securing_Panels_on_Slopes_1:3_and_Greater  | Article 9.3.2.6.]])=====
 :Note: ventilation space below panels on slopes ≥ 1:3 is recommended but is not required.

@@ Line 39: / Line 39: @@
 ===Part 9 - Roof Field (Panel Systems)===
-====='''<big>Securing Panels on Slopes 1:6 to up to 1:3</big>''' ([[ASM_Roof_Systems_Standard#9.3.2.5._Securing_Panels_on_Slopes_1:6_up_to_1:3  | Article 9.3.2.5.]])=====
+====='''<big>Securing Panel Systems on Slopes 1:6 to up to 1:3</big>''' ([[ASM_Roof_Systems_Standard#9.3.2.5._Securing_Panels_on_Slopes_1:6_up_to_1:3  | Article 9.3.2.5.]])=====
 ======'''<big>Uninsulated Assembly</big>'''======
 <ol>

@@ Line 22: / Line 22: @@
 <hr>
 ===Part 6 - Air and Vapour Controls===
-====='''Continuity and Support''' ([[ASM_Roof_Systems_Standard#6.3.2.1._Continuity_and_Support | Article 6.3.2.1.]])=====
+====='''<big>Continuity and Support</big>''' ([[ASM_Roof_Systems_Standard#6.3.2.1._Continuity_and_Support | Article 6.3.2.1.]])=====
 <ol>
 <li>[[ASM Air and Vapour Controls (Field) | Air and Vapour Controls (Field)]]
@@ Line 28: / Line 28: @@
 ===Part 8 - Eave, Valley, and Field Underlayment===
-====='''Eave Protection/Underlayment (Slopes 1:3 or More)''' ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection | Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.3. Underlayment for Common and Steep Slopes | Article 8.3.2.3.]])=====
+====='''<big>Eave Protection/Underlayment (Slopes 1:3 or More)</big>''' ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection | Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.3. Underlayment for Common and Steep Slopes | Article 8.3.2.3.]])=====
 <ol>
 <li>[[ASM Eave Protection and Underlayment  | Eave Protection and Underlayment ]]
 </li></ol>
-====='''Eave Protection/Underlayment (Slopes Less Than 1:3)''' ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection | Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.4. Underlayment for Slopes Less Than 1:3 | Article 8.3.2.4.]])=====
+====='''<big>Eave Protection/Underlayment (Slopes Less Than 1:3)</big>''' ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection | Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.4. Underlayment for Slopes Less Than 1:3 | Article 8.3.2.4.]])=====
 <ol>
 <li>[[ASM Eave Protection and Underlayment (Low Slopes) | Eave Protection and Underlayment (Low Slopes)]]
@@ Line 78: / Line 78: @@
 ===Part 10 - Perimeters and Valleys===
-====='''Roof-Wall Connections''' ([[ASM_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])=====
+====='''<big>Roof-Wall Connections</big>''' ([[ASM_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])=====
 <ol>
@@ Line 85: / Line 85: @@
 </li></ol>
-====='''Ridges''' ([[ASM_Roof_Systems_Standard#10.3.4.1._Ridges | Article 10.3.4.1.]])=====
+====='''<big>Ridges</big>''' ([[ASM_Roof_Systems_Standard#10.3.4.1._Ridges | Article 10.3.4.1.]])=====
 <ol>
@@ Line 93: / Line 93: @@
 </li></ol>
-====='''Eave and Rake Edge Details''' ([[ASM_Roof_Systems_Standard#10.3.4.2._Eaves_and_Rake_Edges | Article 10.3.4.2.]])=====
+====='''<big>Eave and Rake Edge Details</big>''' ([[ASM_Roof_Systems_Standard#10.3.4.2._Eaves_and_Rake_Edges | Article 10.3.4.2.]])=====
 <ol>
 <li>[[ASM Eave and Rake Edges (Mechanical Seams)  | Eave and Rake Edges (Mechanical Seams)]]
@@ Line 101: / Line 101: @@
 </li></ol>
-====='''Valleys''' ([[ASM_Roof_Systems_Standard#10.3.5.2._General_Requirements_for_Valley_Metal_Flashing | Article 10.3.5.2.]])=====
+====='''<big>Valleys</big>''' ([[ASM_Roof_Systems_Standard#10.3.5.2._General_Requirements_for_Valley_Metal_Flashing | Article 10.3.5.2.]])=====
 <ol>
@@ Line 113: / Line 113: @@
 ===Part 11 - Drainage===
-====='''Membrane Gutters''' ([[ASM_Roof_Systems_Standard#11.3.3.8._Membrane_Gutters | Article 11.3.3.8.]])=====
+====='''<big>Membrane Gutters</big>''' ([[ASM_Roof_Systems_Standard#11.3.3.8._Membrane_Gutters | Article 11.3.3.8.]])=====
 <ol>
@@ Line 121: / Line 121: @@
 ===Part 12 - Penetrations and Curbs===
-====='''Penetration Flashing''' ([[ASM_Roof_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])=====
+====='''<big>Penetration Flashing</big>''' ([[ASM_Roof_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])=====
 <ol>
@@ Line 128: / Line 128: @@
 </li></ol>
-====='''Curbs''' ([[ASM_Roof_Systems_Standard#12.3.2.4._Curbs_and_Sleepers | Article 12.3.2.4.]])=====
+====='''<big>Curbs</big>''' ([[ASM_Roof_Systems_Standard#12.3.2.4._Curbs_and_Sleepers | Article 12.3.2.4.]])=====
 <ol>

@@ Line 60: / Line 60: @@
 ===Part 9 (Continued)===
-====='''Securing Panels on Slopes 1:3 and Greater''' ([[ASM_Roof_Systems_Standard#9.3.2.6._Securing_Panels_on_Slopes_1:3_and_Greater  | Article 9.3.2.6.]])=====
+====='''<big>Securing Panels on Slopes 1:3 and Greater</big>''' ([[ASM_Roof_Systems_Standard#9.3.2.6._Securing_Panels_on_Slopes_1:3_and_Greater  | Article 9.3.2.6.]])=====
 :Note: ventilation space below panels on slopes ≥ 1:3 is recommended but is not required.

@@ Line 63: / Line 63: @@
 :Note: ventilation space below panels on slopes ≥ 1:3 is recommended but is not required.
 <ol>
 <li>Uninsulated Assembly, Standard Clip - Drawings here (2 views)
 <li>Uninsulated Assembly, Tall Clip - Drawings here (2 views)
 <li>Insulated Assembly, Standard Clip on EPDM pad - Drawings here (2 views)
 <li>Insulated Assembly, Tall Clip on Bearing Plate - Drawings here (2 views)

← Older revision	Revision as of 22:14, 2 February 2026
Line 1:	Line 1:
	+	__NONUMBEREDHEADINGS__
	+	{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
	+	__NOTOC__

	+	:<big><big>Division D - Construction Details</big></big>
	+	:<hr>
	+	:<big><big><big><big><big>Construction Details for Architectural Sheet Metal (ASM) Roof Systems</big></big></big></big></big>
	+
	+	<div class="col-md-2">
	+	:[[File:ASM Project.jpg \| link=http://rpm.rcabc.org/images/b/b2/ASM_Project.jpg\|175 px]]
	+	</div>
	+
	+	<div class="col-md-10">
	+	:The drawings linked on this page are intended to represent a variety of ASM roof system applications while remaining generic with regards to ''manufacturer's'' specific application specifications. They do not represent all possible ''manufacturer'' application roof system designs. Consult each ''manufacturer's'' specifications and the '''''RoofStar Guarantee Standards''''' to develop a system acceptable to both the manufacturer and the '''''RoofStar Guarantee Program'''''.
	+
	+	:For further information about Architectural Sheet Metal Roof System designs and requirements, see the '''[https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard Standard for Architectural Sheet Metal (ASM) Roof Systems]'''.
	+	</div>
	+
	+	<div class="col-md-12">
	+	</div>
	+	<div class="col-md-4">
	+	<hr>
	+	===Part 6 - Air and Vapour Controls===
	+	====='''Continuity and Support''' ([[ASM_Roof_Systems_Standard#6.3.2.1._Continuity_and_Support \| Article 6.3.2.1.]])=====
	+	<ol>
	+	<li>[[ASM Air and Vapour Controls (Field) \| Air and Vapour Controls (Field)]]
	+	</li></ol>
	+
	+	===Part 8 - Eave, Valley, and Field Underlayment===
	+	====='''Eave Protection/Underlayment (Slopes 1:3 or More)''' ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection \| Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.3. Underlayment for Common and Steep Slopes \| Article 8.3.2.3.]])=====
	+	<ol>
	+	<li>[[ASM Eave Protection and Underlayment \| Eave Protection and Underlayment ]]
	+	</li></ol>
	+
	+	====='''Eave Protection/Underlayment (Slopes Less Than 1:3)''' ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection \| Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.4. Underlayment for Slopes Less Than 1:3 \| Article 8.3.2.4.]])=====
	+	<ol>
	+	<li>[[ASM Eave Protection and Underlayment (Low Slopes) \| Eave Protection and Underlayment (Low Slopes)]]
	+	</li></ol>
	+
	+	===Part 9 - Roof Field (Panel Systems)===
	+	====='''Panels Over Ventilation Materials or Voids: <u>Slopes ≥ 1:6 to < 1:3</u>''' ([[ASM_Roof_Systems_Standard#9.3.2.5. Panels Over Ventilation Materials or Voids \| Article 9.3.2.5.]])=====
	+
	+	<ol>
	+	<li>Uninsulated Assembly, Standard Clip - Drawings here (2 views)
	+	<li>Uninsulated Assembly, Tall Clip - Drawings here (2 views)
	+	<li>Insulated Assembly, Standard Clip on EPDM pad - Drawings here (2 views)
	+	<li>Insulated Assembly, Tall Clip on Bearing Plate - Drawings here (2 views)
	+	<li>Insulated Assembly, Tall Clip on Girt Supported by Thermally Non-conductive Clip - Drawings here (2 views)
	+	<li>Insulated Assembly, Tall Clip on Girt - Drawings here (2 views)
	+	</li></ol>
	+
	+	</div>
	+	<div class="col-md-4">
	+	<hr>
	+
	+	===Part 9 (Continued)===
	+
	+	====='''Panels Over Ventilation Materials or Voids: <u>Slopes ≥ 1:3</u>''' ([[ASM_Roof_Systems_Standard#9.3.2.5. Panels Over Ventilation Materials or Voids \| Article 9.3.2.5.]])=====
	+	:Note: ventilation space below panels on slopes ≥ 1:3 is recommended but is not required.
	+
	+	<ol>
	+	<li>Uninsulated Assembly, Standard Clip - Drawings here (2 views)
	+	<li>Uninsulated Assembly, Tall Clip - Drawings here (2 views)
	+	<li>Insulated Assembly, Standard Clip on EPDM pad - Drawings here (2 views)
	+	<li>Insulated Assembly, Tall Clip on Bearing Plate - Drawings here (2 views)
	+	<li>Insulated Assembly, Tall Clip on Girt Supported by Thermally Non-conductive Clip - Drawings here (2 views)
	+	<li>Insulated Assembly, Tall Clip on Girt - Drawings here (2 views)
	+	</li></ol>
	+
	+	===Part 10 - Perimeters and Valleys===
	+	====='''Roof-Wall Connections''' ([[ASM_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls \| Article 10.3.2.3.]])=====
	+
	+	<ol>
	+	<li>[[ASM Roof-Wall Connection (Head-wall) \| Roof-Wall Connection (Head-wall)]]
	+	<li>[[ASM Roof-Wall Connection (Head-wall, Vented) \| Roof-Wall Connection (Head-wall, Vented)]]
	+	</li></ol>
	+
	+	====='''Ridges''' ([[ASM_Roof_Systems_Standard#10.3.4.1._Ridges \| Article 10.3.4.1.]])=====
	+
	+	<ol>
	+	<li>[[ASM Ridge (Unvented, Uninsulated) \| Ridge (Unvented, Uninsulated)]]
	+	<li>[[ASM Ridge (Unvented, Insulated) \| Ridge (Unvented, Insulated)]]
	+	<li>[[ASM Ridge (Vented, Uninsulated) \| Ridge (Vented, Uninsulated)]]
	+	</li></ol>
	+
	+	====='''Eave and Rake Edge Details''' ([[ASM_Roof_Systems_Standard#10.3.4.2._Eaves_and_Rake_Edges \| Article 10.3.4.2.]])=====
	+	<ol>
	+	<li>[[ASM Eave and Rake Edges (Mechanical Seams) \| Eave and Rake Edges (Mechanical Seams)]]
	+	<li>[[ASM Eave and Rake Edges (Snap-Lock Seams) \| Eave and Rake Edges (Snap-Lock Seams)]]
	+	<li>[[ASM Eave and Rake Edges (Copper) \| Eave and Rake Edges (Copper)]]
	+	<li>[[ASM Eave and Rake Edges (Zinc) \| Eave and Rake Edges (Zinc)]]
	+	</li></ol>
	+
	+	====='''Valleys''' ([[ASM_Roof_Systems_Standard#10.3.5.2._General_Requirements_for_Valley_Metal_Flashing \| Article 10.3.5.2.]])=====
	+
	+	<ol>
	+	<li>[[ASM Valley (Hooked) \| Valley (Hooked)]]
	+	<li>[[ASM Valley (Unhooked) \| Valley (Unhooked)]]
	+	</li></ol>
	+
	+	</div>
	+	<div class="col-md-4">
	+	<hr>
	+
	+	===Part 11 - Drainage===
	+	====='''Membrane Gutters''' ([[ASM_Roof_Systems_Standard#11.3.3.8._Membrane_Gutters \| Article 11.3.3.8.]])=====
	+
	+	<ol>
	+	<li>[[ASM Membrane Gutter (Design Elements) \| Membrane Gutter (Design Elements)]]
	+	<li>[[ASM Membrane Gutter (Insulated Assembly) \| Membrane Gutter (Insulated Assembly)]]
	+	</li></ol>
	+
	+	===Part 12 - Penetrations and Curbs===
	+	====='''Penetration Flashing''' ([[ASM_Roof_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations \| Article 12.3.2.1.]])=====
	+
	+	<ol>
	+	<li>[[ASM Cylindrical Penetration (Flexible Boot Flashing) \| Cylindrical Penetration (Flexible Boot Flashing)]]
	+	<li>[[ASM Cylindrical Penetration (Split Panel Flashing) \| Cylindrical Penetration (Split Panel Flashing)]]
	+	</li></ol>
	+
	+	====='''Curbs''' ([[ASM_Roof_Systems_Standard#12.3.2.4._Curbs_and_Sleepers \| Article 12.3.2.4.]])=====
	+
	+	<ol>
	+	<li>[[ASM Curb (Split Panel Flashing) \| Curb (Split Panel Flashing)]]
	+	</li></ol>
	+
	+	===Part 13 - Linear Metal Flashing===
	+
	+	</div>
	+
	+	<div class="col-md-12">
	+	<hr>
	+
	+	[[ASM Roof Systems Standard\|<i class="fa fa-chevron-circle-left" ></i> ''Standard for ASM Roof Systems'']]
	+
	+	[[Main Page \| <i class="fa fa-home fa"></i> Home]]
	+	{{Template:RPM Page Footer with Copyright and Current Date}}
	+	</div>