Difference between revisions of "ASM Curb (Split Panel Flashing)"

Revision as of 14:46, 25 April 2019

RoofStar Guarantee Standards are blue-linked

ASM Details

Click below for a printable version of this page.

(1) Architectural Metal Roof Panel
(2) Metal Counter Flashing
(3) Backpan Flashing: Required for curbs up to 900 mm (36") wide.
(4) Metal Curb Flashing
(5) Acceptable Caulking: Two rows accepted caulking between overlapping sheets, with preformed closures on trapezoidal ribbed roof panels.
(6) Cleat.
(7) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
(8) Underlayment: The type of underlay required is determined by roof slope.
(9) Metal Panel Clip: Installed to metal roof panel manufacturer's printed instructions.
(10) Air / Vapour Controls

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Revision as of 22:30, 24 April 2019 (view source) James Klassen (talk \| contribs) ← Older edit	Revision as of 14:46, 25 April 2019 (view source) James Klassen (talk \| contribs) m (James Klassen moved page ASM 11.3 Curb, Split Panel to ASM 11.1.3 Curb, Split Panel) Newer edit →
(No difference)