Difference between revisions of "ASM Membrane Gutter (Insulated Assembly)"

Revision as of 18:59, 10 August 2016

1 WORK INCLUDED

(1) Built-in Gutter Membrane: For construction details see also E1.7.17 Built-in Gutter. For installation standards, also refer to SBS Standards - 10.3.10: Built-in Membrane Gutters.
(2) Underlayment: The type of underlay required is determined by roof slope and material used to construct deck. Shed onto built in gutter membrane and continuity maintained under the insulation.
(3) Insulation: Tapered crickets formed from accepted insulation set in opposition to allow membrane vapour barrier / underlayment transition seal at built in gutter membrane while providing a level surface for metal panel installation.
(4) Metal Panel Underlayment: Optional
(5) Architectural Metal Roof Panel: For accepted metal roofing panel systems refer to Accepted Materials: Metal Roofing.
(6) Metal Flashing: For installation procedures refer to metal panel construction drawings in Section 8.1.4

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Wood Nailer: For attachment of continuous edge hook flashing.
(C) Fascia Board
(D) Built-in Gutters: Slope to Drains

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Back to ASM Application

Back to ASM Construction Details

Back to Construction Details

@@ Line 1: / Line 1: @@
-<hr>
 [[File:8.1.4.16.1.jpg]]
 === WORK INCLUDED ===
+;(1) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMGUT |'''Built-in Gutter Membrane''']]: For construction details see also [[ASM Details:E1.7.17 (Built-in Gutter)|'''E1.7.17 Built-in Gutter''']]. For installation standards, also refer to [[RoofStar Guarantee Standards for SBS Roof Systems#10.3.10|'''SBS Standards - 10.3.10: Built-in Membrane Gutters''']].
+;(2) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMUNDERLAYMENT|'''Underlayment''']]: The type of underlay required is determined by roof slope and material used to construct deck.  Shed onto built in gutter membrane and continuity maintained under the insulation.
+;(3) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMINS |'''Insulation''']]: Tapered crickets formed from accepted insulation set in opposition to allow membrane vapour barrier / underlayment transition seal at built in gutter membrane while providing a level surface for metal panel installation.
+;(4) '''Metal Panel Underlayment''': Optional
+;(5) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMPANEL |'''Architectural Metal Roof Panel''']]: For accepted metal roofing panel systems refer to [[Architectural Metal Roofing|'''Accepted Materials: Metal Roofing''']].
+;(6) '''Metal Flashing''': For installation procedures refer to metal panel construction drawings in Section 8.1.4
-(1) <b>Built-in Gutter Membrane: </b>For construction details See tab 8.3, Built in Gutters for Water Shedding Roofs. For installation standards refer to Section 2.1.4, D3<b><i> <u>Underlayment </u></i></b>and D9<b><i><u> Built-in Gutters</u></i></b>.
+<hr>
-(2) <b>Underlayment</b>: The type of underlay required is determined by roof slope and material used to construct deck (sees Section 8.1.4.1 and Section 8.1.4.2) Shed onto built in gutter membrane and continuity maintained under the insulation.
-(3) <b>Insulation</b>: Tapered crickets formed from accepted insulation set in opposition to allow membrane vapour barrier / underlayment transition seal at built in gutter membrane while providing a level surface for metal panel installation.
-(4) <b>Metal Panel Underlayment: </b>Optional
-(5) <b>Architectural</b> <b>Metal Roof Panel: </b>For accepted metal roofing panel systems refer to list in Section 8.1.2 and 8.1.3
-(6) <b>Metal Flashing: </b>For installation procedures refer to metal panel construction drawings in Section 8.1.4
 === RELATED WORK BY OTHERS ===
+;(A) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMDECK|'''Acceptable Deck''']]
+;(B) '''Wood Nailer''': For attachment of continuous edge hook flashing.
+;(C) '''Fascia Board'''
+;(D) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMGUT |'''Built-in Gutters''']]: Slope to Drains
-(A) <b>Acceptable Deck: </b>Refer to construction requirements in Section 2.1.4, D2 Roof Decks
-(B) <b>Wood Nailer: </b>For attachment of continuous edge hook flashing.
-(C) <b>Fascia Board</b>
-(D) <b>Built In Gutter: </b>Slope to Drains
-'''NOTE''': Refer to <i>RGC Guarantee Standards</i> for additional requirements.
+'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.
 <hr>
@@ Line 37: / Line 24: @@
+[[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Application'']]
-[[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''ASM Application'']]
+[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Construction Details'']]
-[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''ASM Construction Details'']]
-[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Construction Details'']]
+[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Construction Details'']]