Difference between revisions of "CD 12"

Revision as of 18:58, 19 March 2020

RoofStar Guarantee Standards are blue-linked

SBS Details

File:Image file here

Click below for a printable version of this page.

1 WORK INCLUDED

(1) Numbered item: Descriptive text here.
(2) Numbered item: Link a Standard to the numbered item by showing the Standard page in square brackets, immediately followed by '#' and the anchor point in the text. This will allow the Numbered Item to be linked back to the relevant standards.

2 RELATED WORK BY OTHERS

(A) Item 1: Link a Standard to the numbered item by showing the Standard page in square brackets, immediately followed by '#' and the anchor point in the text. This will allow the Numbered Item to be linked back to the relevant standards.
(B) Item 2: Example text.....

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Back to Name of Standard here

Back to (Roof System here) Construction Details

Back to Construction Details

@@ Line 7: / Line 7: @@
 <div class="col-md-6">
 <div style="text-align:center; vertical-align:center">
-[[File:D1.7.6-5 (1).jpg|class=img-responsive]]
+[[File:image file here|class=img-responsive]]
-[[File:D1.7.6-5 (2).jpg|class=img-responsive]]
+[[File:image file here|class=img-responsive]]
 </div>
@@ Line 25: / Line 25: @@
 <div class="col-md-6">
 === WORK INCLUDED ===
-;(1)  '''Primer''': Application method and coverage rate as approved by Primary Membrane Manufacturer.
+;(1)  '''Numbered item''': Descriptive text here.
-;(2) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSBASE|'''Primary Roof Membrane''']]: Modified Bituminous base and cap sheet membranes installed as per manufacturer's published application specifications.
+;(2) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSBASE|'''Numbered item''']]: Link a Standard to the numbered item by showing the Standard page in square brackets, immediately followed by '#' and the anchor point in the text.  This will allow the Numbered Item to be linked back to the relevant standards.
-;(3) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSPRECURB|'''Pre-Curb (Start-Up Curb) Membrane Flashing''']]: Modified Bituminous base and cap sheet membrane flashing installed as per manufacturer's published application specifications.
-;(4)  [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSLIQUIDDETAILS|'''Proprietary Liquid Membrane Flashing''']]: RoofStar Guarantee Program accepted Liquid Membrane Flashing System(s) or hot melt SBS modified bitumen. (NOTE: Refer to [[Flexible Membrane Roofing Systems: Liquid Membrane Flashing Systems|'''Liquid Membrane Flashing Systems''']] in the Accepted Materials section of this Manual). Install as per Manufacturer's published instructions.
-;(5)  [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBS-STRIPPING|'''Inside Planter Wall Membrane Flashing''']]: Adhered according to manufacturer's specifications using cold adhesive, self-adhered or torch-applied membrane.  Torching directly to wood surfaces is not permitted. Carry membrane flashing plies to reglet termination near top of planter wall (stagger membrane seal minimum 300mm (6").
-;(6)  [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#METALCAP-SBS|'''Reglet - Metal Counter Flashing''']]: As required by the ''RoofStar Guarantee Standards''.  Note that a coping flashing may be paired with the reglet flashing, as illustrated.
-;(7)  '''Plaza Deck / Planter Interior Assembly''': Extruded polystyrene insulation and filter mat over primary roof membranes. Concrete pavers placed above pre-curb membrane flashing height, on proprietary pedestals. Note: membrane flashing is not permitted above pre-curb membrane flashing on plaza deck side of planter walls.
 <hr>
 === RELATED WORK BY OTHERS ===
-;(A) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSDECKS|'''Acceptable Supporting Deck Structure''']]: Concrete slab shown. Each planter area must have a drain through the roof deck.
+;(A) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSDECKS|'''Item 1''']]: Link a Standard to the numbered item by showing the Standard page in square brackets, immediately followed by '#' and the anchor point in the text.  This will allow the Numbered Item to be linked back to the relevant standards.
-;(B) '''Pre-Curb''': Minimum of 100mm (4") in height above concrete deck, smooth dry and clean.
+;(B) '''Item 2''': Example text.....
-;(C) '''Cast over Concrete Planter Wall''': Form on top of membrane sealed Pre-curbs or Start-up curbs.
-;(D) '''Re-Bar''': Placed at centre of Pre-curb.
-;(E) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#METALCAP-SBS|'''Reglet''']]: Premanufactured purpose-made reglet cast in concrete wall or saw-cut.
-;(F) '''Alternate Termination''': Horizontal Reglet alternative to pre-manufactured purpose-made reglet, cast in concrete wall or saw-cut on vertical surface of inside planter walls.
 </div><!-- COL-6-MD -->
 </div><!-- PANEL BODY -->
@@ Line 52: / Line 45: @@
-[[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies |<i class="fa fa-chevron-circle-left fa" ></i> Back to ''RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies'']]
+[[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies |<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Name of Standard here'']]
-[[SBS Modified Bitumen Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''SBS Modified Bitumen Construction Details'']]
+[[SBS Modified Bitumen Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''(Roof System here) Construction Details'']]
 [[Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Construction Details'']]