Materials:Koroslope (HD)(Type 2)

Jump to: navigation, search

Materials:Koroslope (HD)(Type 2)

Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Mansonville Plastics (B.C.) Ltd.
Accepted for RoofStar Guarantee Program
Date TBA
Product Summary

This EPS flat insulation is used when the roof design dictates the need for a greater compressive and thermal value.

Thermal Resistance :RSI = 0.70 / 25 mm (R Value = 4.0 / in.)
Uses:All conventional roofs for single ply, 2 ply modified and built up roof membranes; providing a higher thermal and compressive strength than Korolite Regular Insulation.
Standards:Conforms to CAN / ULC-S701-97 / (CAN / CGSB-51.20-M87) Type 2 thermal insulation expanded polystyrene.
Standard Sizes: 0.6 m x 1.2 m
(24" x 48")
1.2 m x 1.2 m
(48" x 48")
1.2 m x 2.4 m
(48" x 96")
Any thickness that is required to meet thermal requirements.
Click below for the Technical Data Sheet (TBA).

Back to Accepted Materials