Materials:Paradiene 20 EG SA

Jump to: navigation, search

Materials:Paradiene 20 EG SA

Revision as of 15:42, 27 October 2020 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Notice to the Reader:

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance
Manufacturer
Siplast
Accepted for the RoofStar Guarantee Program
Date TBA
Accepted for application in
Waterproofing Systems (roofs)(base membrane)
Water-shedding Systems (underlayment, ASM and Asphalt Shingles)
Product Summary
Paradiene 20 EG SA
  • is a self-adhesive, modified bitumen base flashing reinforcing ply.
  • consists of a fiberglass scrim/fiberglass mat composite impregnated and coated with high quality styrene-butadiene-styrene (SBS) modified bitumen. The back surface and selvage edge are coated with a self-adhesive bitumen layer specifically formulated for optimum adhesion. The back surface is lined with a high strength polyolefin release film, and the selvage edge is lined with a polyolefin release tape.
(adapted from the Technical Data Sheet)
Click below for the Technical Data Sheet.
Technical Data Sheet



Back to Accepted Materials

Home