Difference between revisions of "WP Details:F1.7.9 (Walls - Reglet & Counter-Flashings)"

Jump to: navigation, search

Difference between revisions of "WP Details:F1.7.9 (Walls - Reglet & Counter-Flashings)"

(RELATED WORK BY OTHERS)
Line 30: Line 30:
 
(A) <b>Concrete Wall:</b> Must be dry, smooth and primed for membrane flashing to be adhered directly.  (Plywood or fibre-mat reinforced cement board may be required).
 
(A) <b>Concrete Wall:</b> Must be dry, smooth and primed for membrane flashing to be adhered directly.  (Plywood or fibre-mat reinforced cement board may be required).
  
(B) [http://{{SERVERNAME}}/index.php?title=RoofStar_Guarantee_Standards_for_Waterproofing#WPREGLET '''Reglet''']: Minimum 75mm (3/4") in depth, saw cut or manufactured preformed reglet.
+
(B) [http://{{SERVERNAME}}/index.php?title=RoofStar_Guarantee_Standards_for_Waterproofing#WPREGLET '''Reglet''']: Minimum 19mm (3/4") in depth, saw cut or manufactured preformed reglet.
 
</div><!-- COL-6-MD -->
 
</div><!-- COL-6-MD -->
 
</div><!-- PANEL BODY -->
 
</div><!-- PANEL BODY -->

Revision as of 18:42, 14 May 2018

RoofStar Guarantee Standards are blue-linked
Waterproofing Details for Plazas, Promenades and Terraces

9.6.9.jpg

1 WORK INCLUDED

(1) Primary Waterproofing Membrane: Fully adhered to acceptable substrates (concrete slab depicted), installed as per RoofStar Guarantee Standards for Waterproofing Plazas, Promenades & Terraces and Membrane Manufacturer's installation specifications.

(2) Membrane Flashing (stripping): Carried up walls a minimum 200 mm (8") above membrane surface (Deck) and a minimum of 100mm (4") above top surface of permeable waterproofing wearing surfaces and overburdens.

(3) Membrane Primer or Adhesive: proprietary primer or adhesive, application and quantities as directed by membrane manufacturers published application specifications.

(4) Metal Base Flashing: Required on all waterproofing assemblies flashing lengths joined by use of S-locks or standing seam joints.

(5) Metal Counter Flashing: Set in reglet fastened with expanding type concrete pins, join flashing lengths by use of S-locks or standing seam joints.

(6) Fasteners: Suitable expanding type concrete pins.

(7) Caulking: Polyurethane sealant, fill void and tool smooth.

2 RELATED WORK BY OTHERS

(A) Concrete Wall: Must be dry, smooth and primed for membrane flashing to be adhered directly. (Plywood or fibre-mat reinforced cement board may be required).

(B) Reglet: Minimum 19mm (3/4") in depth, saw cut or manufactured preformed reglet.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.



RoofStar Guarantee Standards for Waterproofing Plazas, Promenades & Terraces

Back to Waterproofing Construction Details

Back to Construction Details