View source for Asphalt Shingles - Application (Low Slopes)

{{Template:RPM Info}}

{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<big><big>Division D - Construction Details</big></big>
<hr>
<big><big><big><big><big>Asphalt Shingles | Application (Low Slopes) ([[Asphalt_Shingle_Systems_Standard#9.3.2.5. Application on Slopes Less Than 1:3 | Article 9.3.2.5.]])</big></big></big></big></big>
{{Template:Construction Details Header}}
<div class="panel panel-success">
<div class="panel-heading"><big>'''Asphalt Shingle Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<div style="text-align:center; vertical-align:center">
<big>Applicable to slopes 1:6 (2" in 12") and greater.</big>

[[File:7.1.4.1.1.jpg| link=http://rpm.rcabc.org/images/f/f3/7.1.4.1.1.jpg | class=img-responsive]]
</div>
</div><!-- COL-MD-6 -->

<div class="col-md-6">
=== WORK INCLUDED ===
;(1) [[Asphalt Shingle Systems Standard#AShEAVE-UNDERLAYMENT |'''Underlayment & Eave Protection''']]: One ply of self-adhered modified bituminous underlayment material. Lap 75 mm (3") minimum on sides and 150 mm (6") minimum on ends.
;(2) [[Asphalt Shingle Systems Standard#AShPERIM-GEN-APPLICATION|'''Edge Metal Flashing''']]: Required for all eave and rake edges.
;(3) [[Asphalt Shingle Systems Standard#AShPART9GEN-APPLICATION|'''Starter Course''']]: Consists of same type shingles used for roof, applied tabs facing up the slope.
;(4) '''Strip or Standard Shingles''': Applied as recommended by manufacturer. Laminated shingles are <u>not</u> acceptable for this application unless expressly permitted by the manufacturer.
;(5) '''Compatible Mastic''': Heavy bead of compatible asphaltic mastic at rakes (gables) and valleys.
;(6) [[Asphalt Shingle Systems Standard#AShPART11-GEN-APPLICATION|'''Protrusions''']]: Curbs and skylights must be flashed with underlayment so as to shed water, with minimum 125mm (5") up vertical surfaces and 150 mm (6") lapping onto field surfaces (See [[Standard for Asphalt Shingle Systems#AShPART11-CURBS | '''11.3.4 Curbs''']]). Penetration flashings must be installed following the requirements in [[Standard for Asphalt Shingle Systems#AShPART11-PEN-FLASH | '''11.3.3 Penetrations and Vents''']]. For fire-rated stacks or hot pipe protrusions, strip in secondary metal deck flashing before installing rated stack / pipe flashing.
;(7) [[Asphalt Shingle Systems Standard#AShSECUREMENT|'''Nailing''']]:  See the requirements in Section '''3.3 Application'''.

<hr>

=== RELATED WORK BY OTHERS ===
;(A) [[Asphalt Shingle Systems Standard#AShDECKS|'''Acceptable Deck''']]
</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': See the [[Asphalt Shingle Systems Standard | '''Standard''']] for additional requirements.

<hr>

[[Asphalt Shingle System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Asphalt Shingle System Details'']]

[[Main Page | <i class="fa fa-home fa"></i> Home]]

{{Tempate:RPM Page Footer with Copyright and Current Date}}