View source for Materials:(M. Kirk) SS675 Snap Lock

__NOTOC__
__NONUMBEREDHEADINGS__
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}

<big><big>Division C - Accepted Materials</big></big>
<hr>
<big><big><big><big><big>SS675 Snap Lock</big></big></big></big></big><br>
<big><big><big>by Mack Kirk Roofing & Sheet Metal Ltd.</big></big></big><br>

{| class="wikitable"
|-
| style="background-color: #ffffcc; column-width:100%" | The metal panel listed and described below is accepted for use in the '''''RoofStar Guarantee Program'''''.
|}
{| class="wikitable"
|-
| 
;'''Manufacturer''': Mack Kirk Roofing & Sheet Metal Ltd.
;'''Contact Address''': See the current Membership list and contact information at [http://www.rcabc.org/members/find-a-member/ www.rcabc.org]
;'''Product Group - Standing Seam Metal Roof System'''
;'''Panel Machine''': New Tech Machinery, Model SSQ2 MultiPro Roof and Wall Panel Machine
;'''Panel Name''': MK SS675 Snap Lock
;'''Seam Type''': Snap Lock
;'''Date of Acceptance''': June 12, 2025

The roofing assembly / material information published below and in the [http://{{SERVERNAME}}/index.php?title=Main_Page RCABC Roofing Practices Manual] DOES NOT represent a complete set of the manufacturer's published data, nor does it represent a detailed specification. The preparation of a detailed specification is the responsibility of the design authority.  For more information about this product or system, consult the manufacturer.
|}

====OVERVIEW====
The New Tech SSQ2 is an on-site continuous panel metal roofing machine. Panel profiles vary from 300 mm (12") to 610 mm (24") wide; stiffening ribs are standard. 

On-site roll forming provides for the elimination of end laps with continuous panel forming capabilities in lengths up to nominal 29 m (95'). 
====SYSTEM DESCRIPTION====
#'''General''': The ''MK SS675 Snap Lock'' is a snap-locked, concealed fastener roofing panel, secured with independent standing clips. The panel can be formed in any width between 300 mm (12") to 610 mm (24").
#'''Range of application''': on wood or metal sloped roofs; in commercial, institutional, industrial and residential construction; for re-roofing or new construction. 
#'''Fabrication''':
##Unless otherwise shown on drawings or specified herein, fabricate panels in continuous one piece lengths and fabricate flashings and accessories in longest practical lengths. 
##Roofing panels shall be factory formed or site formed.
##Verify prior to fabrication. 
##If field measurements differ from drawing dimensions, notify Architect / Professional Engineer prior to fabrication.
#'''Fasteners (Screws)''': Fasteners used to attach panel clips to steel to be No. 10 - 12 by 25 mm (1") long pancake head wood screws.  Minimum two fasteners per clip to be used.
#'''Panel Clips''': Two piece assembly, consisting of a steel base (length and width unspecified, subject to engineering requirements), minimum thickness 0.036" (No. 20 MSG), and an upper tab (length and width unspecified, subject to engineering requirements), minimum thickness 0.020" (No. 26 MSG). Spacing of clips is subject to engineering requirements.
#'''Deck Requirements''': in keeping with the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].

====PROFILE====
{| class="wikitable"
|-
! MK SS675 Snap Lock Panel
|-
| [[File:MK SS675 Snap Lock (Profile).jpg|frameless|link=https://rpm.rcabc.org/images/c/cc/MK_SS675_Snap_Lock_%28Profile%29.jpg|750px]]
|}

====TECHNICAL DATA SHEET====
Click below for the '''Technical Data Sheet'''

<div style="width:150px; text-align: left;">
[[File:Pdf.png|75 px|link=https://rpm.rcabc.org/images/e/ec/Mack_Kirk_SS675_Panel.pdf|'''Technical Data Sheet''']]
</div>

====SITE CONDITIONS====
#Minimum roof slope is 1:4 (3" in 12"). Severe conditions (heavy snow or ice) minimum slope is 1:1.5 (8" in 12"). 

====PERFORMANCE REQUIREMENTS====
<ol>
<li>'''Wind Uplift Resistance''': Panel securement shall conform to the requirements in [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#PART_3 Part 3] of the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].
<li>'''Materials''':RoofStar (RGC) accepted metal panel systems shall be formed of steel conforming to the requirements published in [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#Section_9.2._Materials Section 9.2.] of the Standard.
</li></ol>

<hr>


[[Architectural Metal Roofing|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Site-Formed Metal Roofing Systems'']]

[[Materials by Product Type|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Accepted Materials'']]


[[Main Page|Home]]