View source for EPDM Metal Edge Termination

{{Template:RPM Info}}

{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<big><big>Division D - Construction Details</big></big>
<hr>
<big><big><big><big><big>EPDM | Metal Edge Termination ([[EPDM_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]])</big></big></big></big></big>
{{Template:Construction Details Header}}
<div class="panel panel-info">
<div class="panel-heading"><big>'''EPDM Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<br>
<div style="text-align:center; vertical-align:center">
[[File:Part 10 - Construction Detail - Metal Edge Termination - EPDM.png|class=img-responsive | link=https://rpm.rcabc.org/images/f/f1/Part_10_-_Construction_Detail_-_Metal_Edge_Termination_-_EPDM.png]]
</div>

</div><!-- COL-MD-6 -->

<div class="col-md-6">
=== WORK INCLUDED ===
;(1) [[EPDM Roof Systems Standard#PART_9|'''Suitable field substrate''']]: May be the roof deck or deck overlay (if an uninsulated system), or insulation and an overlay (if conventionally insulated).
;(2) '''Primer or adhesive''': For self-adhered or adhered membranes, as required by the ''manufacturer''.
;(3) [[EPDM Roof Systems Standard#PART_9|'''Field Membrane''']]: Selected to conform to the requirements in [https://rpm.rcabc.org/index.php?title=SBS_Roof_Systems_Standard#9.2.1.1. Membrane Composition, Thickness, and Selection '''Table 9.2.1.1.'''] and conforming to the options or requirements in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'', or a custom-engineered assembly.  Carried continuously over the outside edge and down the vertical face at least 50.8 mm (2”), or 50.8 mm past any cold joint.
;(4) '''Sealant''': Applied to membrane, beneath metal edge flashing.
;(5) [[EPDM Roof Systems Standard#PART_10 | '''Metal edge flashing''' (Flush with roof surface)]]: Fasteners spaced no more than 203.2 mm (8”) on the top face in two offsetting rows.
:A hemmed drip edge (shown) is required (Refer to Article 13.2.2.1. for fabrication requirements).
;(6) [[EPDM Roof Systems Standard#PART_10 | '''Membrane flashing strip''']]: Adhered to the metal edge flashing and overlapping onto the field membrane at least 101.6 mm (4”). Edges must be sealed with the ''manufacturer’s'' proprietary edge sealant.
;(7) '''Edge sealant''':

<hr>

=== RELATED WORK BY OTHERS ===
;(A) [[EPDM Roof Systems Standard#PART_2|'''Supporting (Structural) Roof Deck''']]: Generic and representative only.
;(B) '''Roof edge substrate''': Necessary for securing screw fasteners. Generic and representative only.
;(C) '''Wall assembly''': Generic and representative only.
</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': See the [[EPDM Roof Systems Standard | '''Standard''']] for additional requirements.

<hr>

[[EPDM Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''EPDM Roof System Details'']]

[[RCABC Roofing Practices Manual | <i class="fa fa-home fa"></i> Home]]

{{Template:RPM Page Footer with Copyright and Current Date}}