View source for EPDM Low Door Opening

{{Template:RPM Info}}

{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<big><big>Division D - Construction Details</big></big>
<hr>
<big><big><big><big><big>EPDM | Low Door Opening ([[EPDM_Roof_Systems_Standard#10.3.4.5._Doors.2C_Windows.2C_and_Wall_Openings | Article 10.3.4.5.]])</big></big></big></big></big>
{{Template:Construction Details Header}}
<div class="panel panel-info">
<div class="panel-heading"><big>'''EPDM Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<br>
<div style="text-align:center; vertical-align:center">
[[File:Part 10 - Construction Detail - Low Door Opening - EPDM.png|link=https://rpm.rcabc.org/images/8/84/Part_10_-_Construction_Detail_-_Low_Door_Opening_-_EPDM.png |class=img-responsive]]
</div>
</div><!-- COL-MD-6 -->

<div class="col-md-6">
=== WORK INCLUDED ===
;(1) [[EPDM Roof Systems Standard#PART_1|'''Roof system''']]: Conventionally insulated system shown (refer to the membrane Standard for requirements).
;(2) [[EPDM Roof Systems Standard#PART_9|'''Field membrane''']]: EPDM shown (see Part 9 for requirements)
;(3) [[EPDM Roof Systems Standard#PART_10|'''Self-adhered membrane (pre-flashing)''']]: Adhered.  Apply over rough sill or sill woodwork.  Prime as required.
;(4) [[EPDM Roof Systems Standard#PART_10|'''Metal water-stop flashing''']]: Dimensions as specified in design.  Mechanically attach to inside face of door sill.  Cut flashing to fit opening width.
;(5) [[EPDM Roof Systems Standard#PART_10|'''Membrane flashing (not shown)''']]: Optional, if field membrane stops at edge securement. Install to overlap and seal in metal water-stop flashing.
;(6) [[EPDM Roof Systems Standard#PART_10|'''Membrane corner reinforcement''']]: Install as required by the Standard and the ''manufacturer''.
;(7) [[EPDM Roof Systems Standard#PART_13|'''Metal base flashing (under door)''']]: Optional; protection for membrane when pavers are installed (shown), or when exposed membrane is vulnerable to damage.  Mechanical fasteners must be at least 87.5 mm (3-1/2”) above the drainage plane.
;(8) [[EPDM Roof Systems Standard#PART_10|'''Membrane flashing (not shown)''']]: Optional, if field membrane stops at edge securement. Applicable for exterior-insulated walls. Seals roof membrane flashing to air/vapour barrier on wall and provides sufficient exposure for positive union with WRB (by others). Mechanically secure membrane (metal base flashing used for securement in this detail).
;(9) [[EPDM Roof Systems Standard#PART_10|'''Metal base flashing (walls)''']]: Optional; protects membrane flashing from damage, and functions as removable panel to permit access to membrane flashing for future replacement.
;(10) [[EPDM Roof Systems Standard#PART_14|'''Pavers and pedestals''']]: May be installed by others, if specified.  See '''Part 14''' for material and application requirements.  Must be at least 12 mm (1/2”) away from other pavers, and from membrane flashing or metal base flashing, to permit adequate drainage.

<hr>

=== RELATED WORK BY OTHERS ===
;(A) '''Wall and cladding''': Generic and representative only.
;(B) '''WRB (Water Resistive Barrier)''': Generic and representative only.
;(C) '''Door and jamb assembly''': Generic and representative only.
</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': See the [[EPDM Roof Systems Standard | '''Standard''']] for additional requirements.

<hr>

[[EPDM Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''EPDM Roof System Details'']]

[[RCABC Roofing Practices Manual| <i class="fa fa-home fa"></i> Home]]

{{Template:RPM Page Footer with Copyright and Current Date}}