View source for Hot Rubber Low Door Opening

{{Template:RPM Info}}

{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<big><big>Division D - Construction Details</big></big>
<hr>
<big><big><big><big><big>Hot Rubber | Low Door Opening ([[Hot_Rubber_Roof_Systems_Standard#10.3.4.5._Doors.2C_Windows.2C_and_Wall_Openings | Article 10.3.4.5.]])</big></big></big></big></big>
{{Template:Construction Details Header}}
<div class="panel panel-info">
<div class="panel-heading"><big>'''SBS Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<br>
<div style="text-align:center; vertical-align:center">
[[File:Part 10 - Construction Detail - Low Door Opening - HOT RUBBER.png|link=https://rpm.rcabc.org/images/8/8b/Part_10_-_Construction_Detail_-_Low_Door_Opening_-_HOT_RUBBER.png |class=img-responsive]]
</div>
</div><!-- COL-MD-6 -->

<div class="col-md-6">
=== WORK INCLUDED ===
;(1) [[Hot Rubber Roof Systems Standard#PART_9|'''Field membrane''']]: Reinforced hot rubber system shown, including protection materials (see '''Part 9''' for requirements)
;(2) [[Hot Rubber Roof Systems Standard#PART_1|'''Roof system''']]: Protected membrane system (from bottom: drainage layer, insulation (2 layers), filter fabric, pavers on pedestals).  Note the location of the drainage layer and refer to [https://rpm.rcabc.org/index.php?title=Hot_Rubber_Roof_Systems_Standard#7.1.6.2._Drainage_Mats_and_Filter_Fabric Article 7.1.6.2.] concerning this issue.
;(3) [[Hot Rubber Roof Systems Standard#PART_10|'''Self-adhered membrane (pre-flashing)''']]: Apply over rough sill or sill woodwork.  Prime as required.  When sheet membrane flashing is used, it may be installed following the pre-flashing method (before the application of the hot fluid rubberized asphalt) but shall in any event conform to the RGC Standard and to the ''manufacturer's'' application requirements (see '''Part 10''' for requirements).
;(4) [[Hot Rubber Roof Systems Standard#PART_10|'''Metal water-stop flashing''']]: Dimensions as specified in design.  Mechanically attach to inside face of door sill.  Cut flashing to fit opening width.
;(5) [[Hot Rubber Roof Systems Standard#PART_10|'''Membrane flashing''']]: Base membrane shown.  Install to overlap and seal in metal water-stop flashing.
;(6) [[Hot Rubber Roof Systems Standard#PART_10|'''Membrane gussets''']]: Install in corners to seal joints.
;(7) [[Hot Rubber Roof Systems Standard#PART_13|'''Metal base flashing (under door)''']]: Optional; protection for membrane when pavers are installed (shown), or when exposed membrane is vulnerable to damage.  Mechanical fasteners must be at least 87.5 mm (3-1/2”) above the drainage plane.
;(8) [[Hot Rubber Roof Systems Standard#PART_10|'''Membrane flashing''']]: Applicable for exterior-insulated walls.  Seals roof membrane flashing to air/vapour barrier on wall and provides sufficient exposure for positive union with WRB (by others).  Mechanically secure membrane (metal base flashing used for securement in this detail).
;(9) [[Hot Rubber Roof Systems Standard#PART_10|'''Metal base flashing (walls)''']]: Optional; protects membrane flashing from damage, and functions as removable panel to permit access to membrane flashing for future replacement.
;(10) [[Hot Rubber Roof Systems Standard#PART_14|'''Pavers and pedestals''']]: May be installed by others, if specified.  See '''Part 14''' for material and application requirements.  Must be at least 12 mm (1/2”) away from other pavers, and from membrane flashing or metal base flashing, to permit adequate drainage.

<hr>

=== RELATED WORK BY OTHERS ===
;(A) '''Wall and cladding''': Generic and representative only.
;(B) '''WRB (Water Resistive Barrier)''': Generic and representative only.
;(C) '''Door and jamb assembly''': Generic and representative only.
</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': See the [[Hot Rubber Roof Systems Standard | '''Standard''']] for additional requirements.

<hr>

[[Hot Rubber Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Hot Rubber Roof System Details'']]

[[RCABC Roofing Practices Manual| <i class="fa fa-home fa"></i> Home]]

{{Template:RPM Page Footer with Copyright and Current Date}}