View source for PVC Metal Edge Termination

{{Template:RPM Info}}

{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<big><big>Division D - Construction Details</big></big>
<hr>
<big><big><big><big><big>PVC | Metal Edge Termination ([[PVC_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]])</big></big></big></big></big>
{{Template:Construction Details Header}}
<div class="panel panel-info">
<div class="panel-heading"><big>'''PVC Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<br>
<div style="text-align:center; vertical-align:center">
[[File:Part 10 - Construction Detail - Metal Edge Termination - PVC.png|class=img-responsive | link=https://rpm.rcabc.org/images/2/2b/Part_10_-_Construction_Detail_-_Metal_Edge_Termination_-_PVC.png]]
</div>

</div><!-- COL-MD-6 -->

<div class="col-md-6">
=== WORK INCLUDED ===
;(1) [[PVC Roof Systems Standard#PART_9|'''Suitable field substrate''']]: May be the roof deck or deck overlay (if an uninsulated system), or insulation and an overlay (if conventionally insulated).
;(2) '''Primer or adhesive''': For self-adhered or adhered membranes, as required by the ''manufacturer''.
;(3) [[PVC Roof Systems Standard#PART_9|'''Field Membrane''']]: Selected to conform to the requirements in [https://rpm.rcabc.org/index.php?title=SBS_Roof_Systems_Standard#9.2.1.1. Membrane Composition, Thickness, and Selection '''Table 9.2.1.1.'''] and conforming to the options or requirements in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'', or a custom-engineered assembly.  Carried continuously over the outside edge and down the vertical face at least 50.8 mm (2”), or 50.8 mm past any cold joint.
;(4) '''Sealant''': Applied to membrane, beneath metal edge flashing.
;(5) [[PVC Roof Systems Standard#PART_10 | '''Metal edge (flush) flashing''']]: Fasteners spaced no more than 203.2 mm (8”) on the top face in two offsetting rows.
:A hemmed drip edge (shown) is required (Refer to Article 13.2.2.1. for fabrication requirements).
;(6) [[PVC Roof Systems Standard#PART_10 | '''PVC vertical membrane flashing strip''']]: Heat-welded PVC strip, or pressure-sensitive strip, to the metal edge flashing at butt joints, overlapping joint by at least 101.6 mm (4”) on either side. Membrane strip must be applied over joints before top membrane flashing strip (7) is applied.
;(7) [[PVC Roof Systems Standard#PART_10 | '''PVC horizontal membrane flashing strip''']]: Heat-welded to the top face of the edge metal flashing and welded to the field membrane; the membrane must overlap both the metal and the field membrane by no less than 101.6 mm (4”).
;(7) '''Edge sealant''': Must be applied to cut edges, as required by the ''manufacturer''.

<hr>

=== RELATED WORK BY OTHERS ===
;(A) [[PVC Roof Systems Standard#PART_2|'''Supporting (Structural) Roof Deck''']]: Generic and representative only.
;(B) '''Roof edge substrate''': Necessary for securing screw fasteners. Generic and representative only.
;(C) '''Wall assembly''': Generic and representative only.
</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': See the [[PVC Roof Systems Standard | '''Standard''']] for additional requirements.

<hr>

[[PVC Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''PVC Roof System Details'']]

[[RCABC Roofing Practices Manual | <i class="fa fa-home fa"></i> Home]]

{{Template:RPM Page Footer with Copyright and Current Date}}