Template:MARS Membrane - SBS 2-Ply Cap - Revision history

James Klassen at 14:26, 7 April 2020

2020-04-07T14:26:52Z

James Klassen: James Klassen moved page Template:MARS Membrane - 2-Ply Cap to Template:MARS Membrane - SBS 2-Ply Cap

2019-11-01T22:06:39Z

James Klassen moved page Template:MARS Membrane - 2-Ply Cap to Template:MARS Membrane - SBS 2-Ply Cap

James Klassen at 18:51, 8 February 2019

2019-02-08T18:51:15Z

James Klassen at 21:20, 29 June 2018

2018-06-29T21:20:42Z

James Klassen at 19:12, 29 June 2018

2018-06-29T19:12:08Z

James Klassen at 20:05, 18 July 2017

2017-07-18T20:05:11Z

James Klassen at 19:05, 18 July 2017

2017-07-18T19:05:12Z

James Klassen at 18:53, 18 July 2017

2017-07-18T18:53:44Z

James Klassen at 17:42, 18 July 2017

2017-07-18T17:42:32Z

James Klassen at 22:14, 27 April 2017

2017-04-27T22:14:23Z

← Older revision		Revision as of 14:26, 7 April 2020
Line 1:		Line 1:
−	~~:'''How to use the table'''~~
−
−	#In the table below look for <u>maximum wind uplift values that equal or exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
−	#Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
−	#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report. In the absence of published alternates, consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
−
	<div class="table-responsive">		<div class="table-responsive">
	<table class="table">		<table class="table">

@@ Line 35: / Line 35: @@
 |	'''[[IKO Industries Ltd.]]'''	||	[[Materials:Torchflex TP-180 Cap|Torchflex TP-180 Cap]]			||	style="text-align:center;"|	----	||	style="text-align:center;"|	----	||	style="text-align:center;"|	----	||	style="text-align:center;"|	Steel<br>Steel	||	style="text-align:center;"|	2<br>3	||	style="text-align:center;"|	-1.90<br>-2.40	||	style="text-align:center;"|	-4.80<br>-5.10	||	style="text-align:center;"|	-40.00<br>-50.00	||	style="text-align:center;"|	-100.00<br>-106.00	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/1/13/IKO-MARS1.pdf  '''MARS Test Report 1''']<br>[http://rpm.rcabc.org/images/6/65/IKO-MARS2.pdf  '''MARS Test Report 2''']  	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU292551<br>PUB-DRU285771
 |-
-|	'''[[IKO Industries Ltd.]]'''	||	[[Materials:Torchflex TP-250 Cap 5|Torchflex TP-250 Cap 5 mm]]			||	style="text-align:center;"|	----	||	style="text-align:center;"|	----	||	style="text-align:center;"|	----	||	style="text-align:center;"|	Steel<br>Steel	||	style="text-align:center;"|	2<br>3	||	style="text-align:center;"|	-1.90<br>-2.40	||	style="text-align:center;"|	-4.80<br>-5.10	||	style="text-align:center;"|	-40.00<br>-50.00	||	style="text-align:center;"|	-100.00<br>-106.00	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/1/13/IKO-MARS1.pdf  '''MARS Test Report 1''']<br>[http://rpm.rcabc.org/images/6/65/IKO-MARS2.pdf  '''MARS Test Report 2''']  	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU292551<br>PUB-DRU285771
+|	'''[[IKO Industries Ltd.]]'''	||	[[Materials:Torchflex TP-250 Cap 5mm|Torchflex TP-250 Cap 5mm]]			||	style="text-align:center;"|	----	||	style="text-align:center;"|	----	||	style="text-align:center;"|	----	||	style="text-align:center;"|	Steel<br>Steel	||	style="text-align:center;"|	2<br>3	||	style="text-align:center;"|	-1.90<br>-2.40	||	style="text-align:center;"|	-4.80<br>-5.10	||	style="text-align:center;"|	-40.00<br>-50.00	||	style="text-align:center;"|	-100.00<br>-106.00	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/1/13/IKO-MARS1.pdf  '''MARS Test Report 1''']<br>[http://rpm.rcabc.org/images/6/65/IKO-MARS2.pdf  '''MARS Test Report 2''']  	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU292551<br>PUB-DRU285771
 |-
 |	'''[[IKO Industries Ltd.]]'''	||	[[Materials:Torchflex TP-250 Cap|Torchflex TP-250 Cap]]			||	style="text-align:center;"|	----	||	style="text-align:center;"|	----	||	style="text-align:center;"|	----	||	style="text-align:center;"|	Steel<br>Steel	||	style="text-align:center;"|	2<br>3	||	style="text-align:center;"|	-1.90<br>-2.40	||	style="text-align:center;"|	-4.80<br>-5.10	||	style="text-align:center;"|	-40.00<br>-50.00	||	style="text-align:center;"|	-100.00<br>-106.00	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/1/13/IKO-MARS1.pdf  '''MARS Test Report 1''']<br>[http://rpm.rcabc.org/images/6/65/IKO-MARS2.pdf  '''MARS Test Report 2''']  	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU292551<br>PUB-DRU285771

@@ Line 1: / Line 1: @@
 :'''How to use the table'''
-#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
+#In the table below look for <u>maximum wind uplift values that equal or exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
 #In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
 <div class="table-responsive">

@@ Line 1: / Line 1: @@
-<div class="table-responsive">
+:'''How to use the table'''
-#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
+#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
-#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates, locate a
+#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the listed manufacturer for alternates that are accepted by the '''''
 </div>

@@ Line 4: / Line 4: @@
 |+	How to use the table:
-#In the table below look for maximum <u>wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
+#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
 #In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates, locate a possible alternate in the [http://rpm.rcabc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual.  If you are unsure about compatibility, contact the [mailto:guarantees@rcabc.org '''RCABC'''].

← Older revision	Revision as of 22:06, 1 November 2019
(No difference)

@@ Line 2: / Line 2: @@
 <table class="table">
 {|	class="wikitable sortable collapsible collapsed;" style="margin-left: 20pt; margin-right: auto; border: none;"
-|+	Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
+|+	How to use the table:
 !	style="vertical-align:top;"	|	Manufacturer
 !	style="vertical-align:top;"	|	Product Name

@@ Line 35: / Line 35: @@
 ||	'''[[Soprema Inc.]]'''	||	[[Materials:Soprafix Traffic Cap FR 661|Soprafix Traffic Cap FR 661]]	||	style="text-align:center;"|	3 Tested Systems<br>3 Tested Systems<br>4 Tested Systems<br>1 Tested System<br>3 Tested Systems<br>3 Tested Systems<br>3 Tested Systems<br>2 Tested Systems	||	style="text-align:center;"|	-1.80<br>-2.40<br>-2.00<br>----<br>-1.60<br>-2.40<br>-1.90<br>-1.80	||	style="text-align:center;"|	-3.40<br>-5.20<br>-6.20<br>-2.40<br>-3.20<br>-5.20<br>-4.80<br>-2.40	||	style="text-align:center;"|	-37.00<br>-50.00<br>-42.00<br>----<br>-33.00<br>-50.00<br>-40.00<br>-37.0	||	style="text-align:center;"|	-70.00<br>-108.00<br>-130.00<br>-50.00<br>-67.00<br>-108.00<br>-100.00<br>-50.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Plywood<br>Plywood<br>Steel<br>Steel<br>Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/e/ed/SOP-MARS1.pdf '''MARS Test Report 1''']<br>[http://rpm.rcabc.org/images/5/54/SOP-MARS2.pdf  '''MARS Test Report 2''']<br>[http://rpm.rcabc.org/images/9/99/SOP-MARS3.pdf '''MARS Test Report 3''']<br>[http://rpm.rcabc.org/images/e/e8/SOP-MARS4.pdf  '''MARS Test Report 4''']<br>[http://rpm.rcabc.org/images/c/c1/SOP-MARS5.pdf  '''MARS Test Report 5''']<br>[http://rpm.rcabc.org/images/1/13/SOP-MARS6.pdf '''MARS Test Report 6''']<br>[http://rpm.rcabc.org/images/a/a9/SOP-MARS8.pdf  '''MARS Test Report 8''']<br>[http://rpm.rcabc.org/images/c/cb/SOP-MARS9.pdf  '''MARS Test Report 9''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU168525<br>PUB-DRU168520<br>PUB-DRU168540<br>PUB-DRU168534<br>PUB-DRU206751<br>PUB-DRC304890<br>PUB-DRU168553<br>PUB-DRU209321
 |-
-||	'''[[Soprema Inc.]]'''	||	[[Materials:Soprafix Unilay 750|Soprafix Unilay 750]]	||	style="text-align:center;"|	4 Tested Systems	||	style="text-align:center;"|	-2	||	style="text-align:center;"|	-5.2	||	style="text-align:center;"|	-41	||	style="text-align:center;"|	-108	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/9/9d/SOP-MARS7.pdf '''MARS Test Report''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU168549
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Soprafix Unilay 750|Soprafix Unilay 750]]	||	style="text-align:center;"|	4 Tested Systems	||	style="text-align:center;"|	-2	||	style="text-align:center;"|	-5.2	||	style="text-align:center;"|	-41	||	style="text-align:center;"|	-108	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/9/9d/SOP-MARS7.pdf '''MARS Test Report 7''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU168549
 |-
 ||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 180 GR|Sopralene Flam 180 GR]]	||	style="text-align:center;"|	3 Tested Systems<br>3 Tested Systems<br>4 Tested Systems<br>1 Tested System<br>3 Tested Systems<br>3 Tested Systems<br>3 Tested Systems<br>2 Tested Systems	||	style="text-align:center;"|	-1.80<br>-2.40<br>-2.00<br>----<br>-1.60<br>-2.40<br>-1.90<br>-1.80	||	style="text-align:center;"|	-3.40<br>-5.20<br>-6.20<br>-2.40<br>-3.20<br>-5.20<br>-4.80<br>-2.40	||	style="text-align:center;"|	-37.00<br>-50.00<br>-42.00<br>----<br>-33.00<br>-50.00<br>-40.00<br>-37.0	||	style="text-align:center;"|	-70.00<br>-108.00<br>-130.00<br>-50.00<br>-67.00<br>-108.00<br>-100.00<br>-50.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Plywood<br>Plywood<br>Steel<br>Steel<br>Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/e/ed/SOP-MARS1.pdf '''MARS Test Report 1''']<br>[http://rpm.rcabc.org/images/5/54/SOP-MARS2.pdf  '''MARS Test Report 2''']<br>[http://rpm.rcabc.org/images/9/99/SOP-MARS3.pdf '''MARS Test Report 3''']<br>[http://rpm.rcabc.org/images/e/e8/SOP-MARS4.pdf  '''MARS Test Report 4''']<br>[http://rpm.rcabc.org/images/c/c1/SOP-MARS5.pdf  '''MARS Test Report 5''']<br>[http://rpm.rcabc.org/images/1/13/SOP-MARS6.pdf '''MARS Test Report 6''']<br>[http://rpm.rcabc.org/images/a/a9/SOP-MARS8.pdf  '''MARS Test Report 8''']<br>[http://rpm.rcabc.org/images/c/cb/SOP-MARS9.pdf  '''MARS Test Report 9''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU168525<br>PUB-DRU168520<br>PUB-DRU168540<br>PUB-DRU168534<br>PUB-DRU206751<br>PUB-DRC304890<br>PUB-DRU168553<br>PUB-DRU209321