Materials:CLAD-GARD SA Metal Underlayment

Jump to: navigation, search

Materials:CLAD-GARD SA Metal Underlayment



Division C - Accepted Materials


Elevate UltraPly TPO Membrane

Notice to the Reader:

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance
Manufacturer
Elevate Commercial Roofing Systems
Accepted for the RoofStar Guarantee Program
TBA
Accepted for application in
Water-shedding Roof Systems
Product Summary
Elevate CLAD-GARD SA Metal Underlayment consists of a Styrene-Butadiene-Styrene (SBS) rubber modified, self-adhesive asphalt blend with a woven slip resistant traction film on the top surface and an opaque release film on the bottom surface. CLAD-GARD SA Metal Underlayment is designed for use as an underlayment with UNA-CLAD™ metal roofing assemblies. CLAD-GARD SA underlayment is also suitable for use under mechanically attached tile and shingles. This underlayment reseals around nails in accordance with ASTM D 1970. (adapted from the Technical Data Sheet)
Conditions and Limitations
None
Click below for the Technical Data Sheet.
Technical Data Sheet

Back to Accepted Materials

Home