Difference between revisions of "Materials:TRA-LRM"

Revision as of 20:14, 15 October 2019

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Tremco Ltd. Accepted for RoofStar Guarantee Program November 2002 Product Summary The TREMLINE ROOF ASSEMBLY (TRA) utilizes a reinforced EPDM/SBR rubber sheet adhered and seamed with Tremlar LRM (also known as TP 60). It is cold-applied using a bitumen modified with a polyurethane elastomer. The TRA-LRM membrane is accepted for protected membrane roof systems only. TRA-LRM (V) is a vertical grade membrane suitable for membrane flashing. Ancillary products: Reinforcing membrane (Burmesh woven glass) TRA-LRM (V)(vertical grade membrane) Hybrid EPDM Installation Guidelines

Click below for the Technical Data Sheet (TBA).

@@ Line 11: / Line 11: @@
 ;Accepted for '''''RoofStar Guarantee Program''''': November 2002
 ;:
-;'''Product Summary''': The TREMLINE ROOF ASSEMBLY (TRA) utilizes TRA elastomeric sheet and THERMastic (B), a proprietary hot-melt adhesive and waterproofing compound.  TRA sheet is formulated from a select composition of polymers, reinforced with scrim.
+;'''Product Summary''': The TREMLINE ROOF ASSEMBLY (TRA) utilizes a reinforced EPDM/SBR rubber sheet adhered and seamed with Tremlar LRM (also known as TP 60).  It is cold-applied using a bitumen modified with a polyurethane elastomer.
+:The TRA-LRM membrane is accepted for protected membrane roof systems only.  TRA-LRM (V) is a vertical grade membrane suitable for membrane flashing.
+:Ancillary products:
+:* Reinforcing membrane (Burmesh woven glass)
+:* TRA-LRM (V)(vertical grade membrane)
 ;:
 ;[[Tremco Hybrid EPDM Installation Guidelines|Hybrid EPDM Installation Guidelines]]