|
|
| (8 intermediate revisions by the same user not shown) |
| Line 9: |
Line 9: |
| | | '''Manufacturer''': [http://soprema.ca/ '''Soprema Inc.'''] | | | '''Manufacturer''': [http://soprema.ca/ '''Soprema Inc.'''] |
| | ;: | | ;: |
| − | ;Accepted for '''''RoofStar Guarantee Program''''': Date TBA | + | ;Accepted for '''''RoofStar Guarantee Program''''': June 2020 (replaces '''Soprasmart Board 180''') |
| | ;: | | ;: |
| − | ;'''Product Summary''': | + | ;'''Product Summary''': Consult the Technical Data Sheet for information about the product. |
| − | Soprasmart Board 180 is a high density composite panel composed of a non-woven polyester reinforced membrane, {{hilite | available with either a thermofusible or sanded surface || 2015-October-20 }}, laminated on a semi-rigid asphaltic board (Sopraboard). The base sheet is offset from the board on two adjacent edges (1 inch on one end and 3-1/2 inches on 1 side) to provide shiplap; other edges are square. To ensure a secure installation, the side lap is made with a patented DUO-SELVEDGE unique to Soprema (60% self-adhesive and 40% thermofusible). Its self-adhesive component protects combustible surfaces and its thermofusible properties provide an efficient seal. End laps can be aligned then sealed by heat welding a minimum 12" wide membrane reinforcing strip centered over the end lap. Soprasmart Board 180 can be mechanically fastened, adhered with Duotack adhesive, or with a full coat of hot bitumen.
| |
| − | | |
| − | | |
| − | Soprasmart Board 180 can be used for the following applications:
| |
| − | * an overlay board and base sheet on all types of insulation
| |
| − | * a recovery board and base sheet on existing roofing
| |
| − | * an overlay board and base sheet on wood decks
| |
| − | | |
| − | Soprema Inc. may modify the composition of its products without prior notice. Consequently orders will be filled according to the latest specification.
| |
| | |} | | |} |
| | | | |
| Line 26: |
Line 17: |
| | | | |
| | <div style="width:150px; text-align: left;"> | | <div style="width:150px; text-align: left;"> |
| − | :[[File:Pdf.png|150 px|link=http://rpm3.rcabc.org/images/c/ca/Soprema_Soprasmart_Board_180_TDS.pdf|Technical Data Sheet]] | + | :[[File:Pdf.png|150 px|link=http://rpm.rcabc.org/images/c/cd/Soprema_2-1_Soprasmart_Board_TDS.pdf|Technical Data Sheet]] |
| | </div> | | </div> |
| − |
| |
| | | | |
| | <hr> | | <hr> |
| Line 36: |
Line 26: |
| | | | |
| | [[Main Page|Home]] | | [[Main Page|Home]] |
| | + | </div> |
Latest revision as of 21:58, 6 July 2020
| Notice to the Reader:
The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.
|
Manufacturer: Soprema Inc.
- Accepted for RoofStar Guarantee Program
- June 2020 (replaces Soprasmart Board 180)
- Product Summary
- Consult the Technical Data Sheet for information about the product.
|
- Click below for the Technical Data Sheet.
Back to Accepted Materials
Home
