Materials:ZinCo Blue Roof Assembly (Inverted)

Division C - Accepted Materials
Group - Vegetated Roof Systems

---

ZinCo Blue Roof Assembly (Inverted^†)
by ZinCo Canada Inc.

System/Material Acceptance and Product Details The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this system and its various materials recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Vegetated Roof System Manufacturer ZinCo Canada Inc. Accepted for the RoofStar Guarantee Program October 25, 2024 Accepted for application in Vegetated Roof Systems Acceptance Criteria Refer to the RGC Standard for Vegetated Roofs System Summary description here, using breaks †Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly. While Semi-intensive and Intensive vegetated roof systems are limited to only protected membrane roofs (See the Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for conventionally insulated roofs. To request a written Variance to the published limitation, follow the requirements in Article 1.1.3.6.. Note that the supporting roof assembly of vegetated roof systems designed to hold free-standing water must conform to the requirements in Sentences 1.1.3.2.(6) and (7). Manufacturer Online Resource System Depth 215.9 mm (8-1/2") to 304.8 mm (12") Growing Media Depth 101.6 mm (10") to 304.8 mm (12") Vegetation Profile Trees, Shrubs, Perennials, Grasses, Herbacious, Sedums Suitable climate zones All BC zones, subject to manufacturer's approval System Components* In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS) Perennials-Grasses-Herbacious-Sedums (See pre-grown vegetation by ZinCo Canada) or as specified by the Design Authority/Green Roof Design Professional (See Conditions and Limitations below) Blend-E Growing Medium or Growing Medium Blend-I Filter Sheet SF Floradrain: Floradrain FD60-E, Floradrain FD40-E, or Floradrain FD25-E Filter Sheet PV (Alternate) RSX150 Retention Spacer RSX Series (65-80-100) Retention Spacer (Alternate) RSX Series (70-120-170) Retention Spacer (Alternate) Filter Sheet TG TGV 21 Diffusion Membrane XPS Insulation by roofing Contractor (Refer to the RGC Standard for Vegetated Roofs) Root Barrier WSF40 Root Barrier WSB100-PO (alternate root barrier) Waterproofing Roof Assembly (membrane) by roofing Contractor Edging Profile DP300, *Edging Profile DP250, or *Edging Profile DP225 Inspection Chamber KS30SS *Conditions and Limitations Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight. Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.

---

Back to Accepted Materials

Home