Difference between revisions of "SBS Parapet (Independent of Roof Structure)"

Revision as of 16:42, 1 December 2016

RoofStar Guarantee Standards are blue-linked

SBS Details

Click below for a printable version of this page.

(1) Gypsum Deck Overlay
(2) Vapour Retarder: If required by design authority.
(3) Insulation
(4) Insulation Overlay Board: As required.
(5) Primary Membrane and Membrane Protection
(6) Membrane Flashing: Mechanically fasten to outside face of parapet blocking (F). Do not mop outside edge. At least one ply must extend over outside edge.
(7) Metal Base Flashing: Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats. See Section 13.6 - Cap Flashings, Base Flashings and Reglets.
(8) Metal Cap Flashing: Flashings 7 and 8 may be one piece. See Section 14. Fasten with continuous concealed clip-type fasteners or cladding screws evenly spaced between seams. See Section 13.3 - Attachment.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

@@ Line 8: / Line 8: @@
 <div style="text-align:center; vertical-align:center">
 [[File:10.3.1.2.jpg‎|class=img-responsive]]
+</div>
+::Click below for a printable version of this page.
+<div style="width:150px; text-align: left;">
+:[[File:Pdf.png|100 px|link=http://rpm.rcabc.org/images/f/f3/D1.7.2-2_SBS_Details_-_Parapets_%26_Copings_%28Low_Parapet_-_Unsupported_by_Wall%29.pdf]]
 </div>
 </div><!-- COL-MD-6 -->