Difference between revisions of "Materials:ZinCo Sedum Roof (Inverted)"
Difference between revisions of "Materials:ZinCo Sedum Roof (Inverted)"
Line 45: | Line 45: | ||
;Suitable climate zones: All BC zones (except Zone 6), subject to manufacturer's approval | ;Suitable climate zones: All BC zones (except Zone 6), subject to manufacturer's approval | ||
;System Components<sup>*</sup>: In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS) | ;System Components<sup>*</sup>: In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS) | ||
− | :*'''Sedums''' (pre-grown mats & plugs) | + | :{| class="wikitable" |
− | + | |- | |
− | + | | | |
− | + | *'''Sedums''' (pre-grown mats & plugs) | |
− | + | **[https://rpm.rcabc.org/images/3/38/ZinCo_Plug_Plants_Sedum_Carpet_TDS.pdf '''ZinCo Plugs and Sedum Carpets'''] and | |
− | + | **[https://rpm.rcabc.org/images/8/87/ZinCo_Pre-cultivated_Vegetation_Mats_TDS.pdf '''ZinCo pre-cultivated vegetation mats'''] | |
− | + | *[https://rpm.rcabc.org/images/8/86/ZinCo_System_Growing_Medium_%28ZinCo_Blend-E%29_TDS.pdf '''Blend-E Growing Medium'''] | |
− | + | *[https://rpm.rcabc.org/images/9/91/ZinCo_Filter_Sheet_SF_TDS.pdf '''Filter Sheet SF'''] | |
− | + | *[https://rpm.rcabc.org/images/8/80/ZinCo_Fixodrain_XD20_TDS.pdf '''Fixodrain XD20'''] (drainage board) | |
− | + | **[https://rpm.rcabc.org/images/7/75/ZinCo_Floradrain_FD25-E_TDS.pdf '''Floradrain FD25-E'''] (alternate drainage board) | |
− | + | **[https://rpm.rcabc.org/images/3/3d/ZinCo_Drainage_Mat_DBV10_TDS.pdf '''DBV-10'''] (alternate drainage board) | |
− | + | *[https://rpm.rcabc.org/images/4/40/ZinCo_Separation_Membrane_TGV21_TDS.pdf '''TGV 21 Diffusion Membrane'''] | |
+ | :'''XPS Insulation''' by roofing ''Contractor'' (Refer to the [[VRA Standard | RGC Standard for Vegetated Roofs]]) | ||
+ | *[https://rpm.rcabc.org/images/0/09/ZinCo_Root_Barrier_WSF40_TDS.pdf '''Root Barrier WSF40'''] | ||
+ | :'''Waterproofing Roof Assembly''' (membrane) by roofing ''Contractor'' | ||
− | + | *[https://rpm.rcabc.org/images/8/86/ZinCo_Eaves_Profile_DP125_TDS.pdf '''Edging Profile DP125'''] and [https://rpm.rcabc.org/images/1/1d/ZinCo_Eaves_Profile_DP100_TDS.pdf '''Edging Profile DP100'''] | |
− | + | *[https://rpm.rcabc.org/images/7/79/ZinCo_Inspection_Chamber_KS10%2BKS10-GR_TDS.pdf '''Inspection Chamber KS10/30'''] | |
− | + | *'''Extension Piece KSA8''' | |
+ | |} | ||
;<sup>*</sup>Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the ''vegetated roof system manufacturer'' for options and saturated system weight. | ;<sup>*</sup>Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the ''vegetated roof system manufacturer'' for options and saturated system weight. |
Revision as of 19:29, 27 November 2024
Division C - Accepted Materials
Group - Vegetated Roof Systems
ZinCo Sedum Roof (Inverted†)
by ZinCo Canada Inc.
System/Material Acceptance and Product Details
| |
†Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly. While Semi-intensive and Intensive vegetated roof systems are limited to only protected membrane roofs (See the Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for conventionally insulated roofs. To request a written Variance to the published limitation, follow the requirements in Article 1.1.3.6.. ![]()
|