Difference between revisions of "Materials:ZinCo Sedum Roof"

Revision as of 19:30, 27 November 2024

Division C - Accepted Materials
Group - Vegetated Roof Systems

ZinCo Sedum Roof
by ZinCo Canada Inc.

System/Material Acceptance and Product Details

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this system and its various materials recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Vegetated Roof System Manufacturer

ZinCo Canada Inc.

Accepted for the RoofStar Guarantee Program

October 25, 2024

Accepted for application in

Vegetated Roof Systems

Acceptance Criteria

Refer to the RGC Standard for Vegetated Roofs

System Summary

With a plant palette consisting of hardy, drought tolerant sedum species, this is the green roof system designed by ZinCo Canada Inc. for low cost and simple installation. It is lightweight and offers low maintenance requirements. Colourful and long lasting, the ZinCo Sedum Roof system features:

Compact & Lightweight
Low maintenance
Only 60-80 mm of growing medium required
Flexible planting methods, and
Easy Installation

(adapted from the manufacturer's literature)

^†Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly. (See Glossary for definition).

Manufacturer Online Resource: ZinCo Sedum Roof
System Type: Extensive
System Depth^*: 101.6 mm (4") to 127 mm (5")
Growing Media Depth: 80 mm (3-1/8") to 80 mm (3-1/8")
Vegetation Profile: Succulents-Sedums
Suitable climate zones: All BC zones (except Zone 6), subject to manufacturer's approval
System Components^*: In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS)

Sedums (pre-grown mats & plugs) ZinCo Plugs and Sedum Carpets and ZinCo pre-cultivated vegetation mats Blend-E Growing Medium Filter Sheet SF Fixodrain XD20 (drainage board) Floradrain FD25-E (alternate drainage board) DBV-10 (alternate drainage board) Protection Mat TSM32 Root Barrier WSF40 Conventionally Insulated Roof Assembly by roofing Contractor Edging Profile DP125 and Edging Profile DP100 Inspection Chamber KS10/30 Extension Piece KSA8

^*Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight.

Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.

Back to Accepted Materials

Home

@@ Line 44: / Line 44: @@
 ;Suitable climate zones: All BC zones (except Zone 6), subject to manufacturer's approval
 ;System Components<sup>*</sup>: In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS)
-:*'''Sedums''' (pre-grown mats & plugs)
+:{| class="wikitable"
-:**[https://rpm.rcabc.org/images/3/38/ZinCo_Plug_Plants_Sedum_Carpet_TDS.pdf '''ZinCo Plugs and Sedum Carpets'''] and
+|-
-:**[https://rpm.rcabc.org/images/8/87/ZinCo_Pre-cultivated_Vegetation_Mats_TDS.pdf '''ZinCo pre-cultivated vegetation mats''']
+|
-:*[https://rpm.rcabc.org/images/8/86/ZinCo_System_Growing_Medium_%28ZinCo_Blend-E%29_TDS.pdf '''Blend-E Growing Medium''']
+*'''Sedums''' (pre-grown mats & plugs)
-:*[https://rpm.rcabc.org/images/9/91/ZinCo_Filter_Sheet_SF_TDS.pdf '''Filter Sheet SF''']
+**[https://rpm.rcabc.org/images/3/38/ZinCo_Plug_Plants_Sedum_Carpet_TDS.pdf '''ZinCo Plugs and Sedum Carpets'''] and
-:*[https://rpm.rcabc.org/images/8/80/ZinCo_Fixodrain_XD20_TDS.pdf '''Fixodrain XD20'''] (drainage board)
+**[https://rpm.rcabc.org/images/8/87/ZinCo_Pre-cultivated_Vegetation_Mats_TDS.pdf '''ZinCo pre-cultivated vegetation mats''']
-:**[https://rpm.rcabc.org/images/7/75/ZinCo_Floradrain_FD25-E_TDS.pdf '''Floradrain FD25-E'''] (alternate drainage board)
+*[https://rpm.rcabc.org/images/8/86/ZinCo_System_Growing_Medium_%28ZinCo_Blend-E%29_TDS.pdf '''Blend-E Growing Medium''']
-:**[https://rpm.rcabc.org/images/3/3d/ZinCo_Drainage_Mat_DBV10_TDS.pdf '''DBV-10'''] (alternate drainage board)
+*[https://rpm.rcabc.org/images/9/91/ZinCo_Filter_Sheet_SF_TDS.pdf '''Filter Sheet SF''']
-:*[https://rpm.rcabc.org/images/c/c5/ZinCo_Protection_Mat_TSM32_TDS.pdf '''Protection Mat TSM32''']
+*[https://rpm.rcabc.org/images/8/80/ZinCo_Fixodrain_XD20_TDS.pdf '''Fixodrain XD20'''] (drainage board)
-:*[https://rpm.rcabc.org/images/0/09/ZinCo_Root_Barrier_WSF40_TDS.pdf '''Root Barrier WSF40''']
+**[https://rpm.rcabc.org/images/7/75/ZinCo_Floradrain_FD25-E_TDS.pdf '''Floradrain FD25-E'''] (alternate drainage board)
-::'''Conventionally Insulated Roof Assembly''' by roofing ''Contractor''
+**[https://rpm.rcabc.org/images/3/3d/ZinCo_Drainage_Mat_DBV10_TDS.pdf '''DBV-10'''] (alternate drainage board)
+*[https://rpm.rcabc.org/images/c/c5/ZinCo_Protection_Mat_TSM32_TDS.pdf '''Protection Mat TSM32''']
+*[https://rpm.rcabc.org/images/0/09/ZinCo_Root_Barrier_WSF40_TDS.pdf '''Root Barrier WSF40''']
+:'''Conventionally Insulated Roof Assembly''' by roofing ''Contractor''
-:*[https://rpm.rcabc.org/images/8/86/ZinCo_Eaves_Profile_DP125_TDS.pdf '''Edging Profile DP125'''] and [https://rpm.rcabc.org/images/1/1d/ZinCo_Eaves_Profile_DP100_TDS.pdf '''Edging Profile DP100''']
+*[https://rpm.rcabc.org/images/8/86/ZinCo_Eaves_Profile_DP125_TDS.pdf '''Edging Profile DP125'''] and [https://rpm.rcabc.org/images/1/1d/ZinCo_Eaves_Profile_DP100_TDS.pdf '''Edging Profile DP100''']
-:*[https://rpm.rcabc.org/images/7/79/ZinCo_Inspection_Chamber_KS10%2BKS10-GR_TDS.pdf '''Inspection Chamber KS10/30''']
+*[https://rpm.rcabc.org/images/7/79/ZinCo_Inspection_Chamber_KS10%2BKS10-GR_TDS.pdf '''Inspection Chamber KS10/30''']
-:*'''Extension Piece KSA8'''
+*'''Extension Piece KSA8'''
+|}
 ;<sup>*</sup>Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements.  Consult with the ''vegetated roof system manufacturer'' for options and saturated system weight.