Difference between revisions of "Materials:NLSM LiteN'Less II"

Revision as of 15:56, 29 November 2024

Division C - Accepted Materials
Group - Vegetated Roof Systems

NLSM LiteN'Less II
by Next Level Stormwater Management

System/Material Acceptance and Product Details

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this system and its various materials recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Vegetated Roof System Manufacturer: https://www.nlsm.ca/
Accepted for the RoofStar Guarantee Program: October 25, 2024
Accepted for application in: Vegetated Roof Systems
Acceptance Criteria: Refer to the RGC Standard for Vegetated Roofs
System Summary: The LiteN’Less™ II system is Next Level Stormwater Management's lightest vegetated system available. Lightweight and soilless, with no “loose” growing medium, its light weight avoids excessive loading and is therefore offered as a solution for roof retrofits (adapted from the manufacturer's literature).

Manufacturer Online Resource: LiteN’Less™ II System
System Depth: 30.7 mm (1-1/8")
Growing Media Depth: 20 mm (13/16")
Vegetation Profile: Moss-Sedum
Suitable climate zones: All BC zones except Zone 4, subject to manufacturer's approval
System Components^*: In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS)

NL718 Sedum Blanket NL512 Retention Fleece NL512 Retention Fleece (Note that this system requires two (2) layers of fleece) XPS Insulation by roofing Contractor (Refer to the RGC Standard for Vegetated Roofs) NL120 Root Barrier Waterproofing Roof Assembly (membrane) by roofing Contractor NL200 Edging & Accessories NL210 Drain Box & Accessories NL220 Penetration Box NL WindProtect Plate

^†Guarantor's Notes: Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly.

While Semi-intensive and Intensive vegetated roof systems are limited to only protected membrane roofs (See the Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for conventionally insulated roofs. To request a written Variance to the published limitation, follow the requirements in Article 1.1.3.6..

^*Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight.

Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.

Back to Accepted Materials

Home

@@ Line 24: / Line 24: @@
 ;Acceptance Criteria: Refer to the [[VRA Standard | RGC Standard for Vegetated Roofs]]
 ;System Summary: The '''LiteN’Less™ II''' system is Next Level Stormwater Management's lightest vegetated system available. Lightweight and soilless, with no “loose” growing medium, its light weight avoids excessive loading and is therefore offered as a solution for roof retrofits (adapted from the manufacturer's literature).
-<div style="text-align:left;">
+<div style="text-align: left;">
-[[File:Extensive VR System (sedum tile).jpg| left | 450 px| link=]]
+[[File:Extensive VR System (banner).JPG| left | class=img-responsive |  link=]]
 </div>
 </div>
@@ Line 35: / Line 35: @@
 ;Vegetation Profile: Moss-Sedum
 ;Suitable climate zones: All BC zones except Zone 4, subject to manufacturer's approval
-;System Components:
+;System Components<sup>*</sup>: In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS)
-:'''NL718 Sedum Blanket''' (Click [https://rpm.rcabc.org/images/b/bd/NLSM_NL718_Sedum_Blanket_-_Standard_Mix_BC_TDS.pdf here] for the Technical Data Sheet PDF)
+:{| class="wikitable"
-:'''NL512 Retention Fleece''' (Click [https://rpm.rcabc.org/images/a/a7/NLSM_NL512_Retention_Fleece_TDS.pdf here] for the Technical Data Sheet PDF)
+|-
-:'''NL512 Retention Fleece''' (Note that this system requires two (2) layers of fleece)
+|
-:'''NL120 Root Barrier''' (Click [https://rpm.rcabc.org/images/3/32/NLSM_NL120_Root_Barrier_TDS.pdf here] for the Technical Data Sheet PDF)
+*[https://rpm.rcabc.org/images/b/bd/NLSM_NL718_Sedum_Blanket_-_Standard_Mix_BC_TDS.pdf '''NL718 Sedum Blanket''']
-:'''NL200 Edging & Accessories''' (Click [https://rpm.rcabc.org/images/9/96/NLSM_NL200_Edging_and_Accessories_TDS.pdf here] for the Technical Data Sheet PDF)
+*[https://rpm.rcabc.org/images/a/a7/NLSM_NL512_Retention_Fleece_TDS.pdf '''NL512 Retention Fleece''']
-:'''NL210 Drain Box & Accessories'''
+**'''NL512 Retention Fleece''' (Note that this system requires two (2) layers of fleece)
-:'''NL220 Penetration Box'''
+:'''XPS Insulation''' by roofing ''Contractor'' (Refer to the [[VRA Standard | RGC Standard for Vegetated Roofs]])
-:'''NL WindProtect Plate'''
+*[https://rpm.rcabc.org/images/3/32/NLSM_NL120_Root_Barrier_TDS.pdf '''NL120 Root Barrier''']
+:'''Waterproofing Roof Assembly''' (membrane) by roofing ''Contractor''
+*[https://rpm.rcabc.org/images/9/96/NLSM_NL200_Edging_and_Accessories_TDS.pdf '''NL200 Edging & Accessories''']
+*'''NL210 Drain Box & Accessories'''
+*'''NL220 Penetration Box'''
+*'''NL WindProtect Plate'''
+|}
+</div>
+<div class="col-md-12">
+<hr>
+<div class="col-md-6">
+;<sup>†</sup>Guarantor's Notes: Systems labeled "Inverted" are designed for a ''protected membrane roof assembly'', also known as an inverted ''roof assembly''.
+:While ''Semi-intensive'' and ''Intensive vegetated roof systems'' are limited to only ''protected membrane roofs'' (See the [https://rpm.rcabc.org/index.php?title=VRA_Standard#1.1.3.2._Permitted_Vegetated_Roof_Systems Sentence 1.1.3.2.(5)] in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for ''conventionally insulated roofs''.  To request a written Variance to the published limitation, follow the requirements in [https://rpm.rcabc.org/index.php?title=VRA_Standard#1.1.3.6._Variances Article 1.1.3.6.].
+</div>
+<div class="col-md-6">
 ;<sup>*</sup>Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements.  Consult with the ''vegetated roof system manufacturer'' for options and saturated system weight.
 :Also note that vegetation coverage under the '''''RoofStar Vegetated Roof Guarantee''''' applies only to ''extensive systems'' planted with mats or trays - see [https://rpm.rcabc.org/index.php?title=Guarantee Part 3] of Division A for more about coverage.
 </div>
 </div>