Materials:ULTRASeal SA HT

Jump to: navigation, search

Materials:ULTRASeal SA HT

Revision as of 17:41, 25 June 2024 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)



Division C - Accepted Materials


ULTRASeal SA HT
by KPNE Products Ltd.

Material Acceptance and Product Details


The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer
Name linked to website here
Accepted for the RoofStar Guarantee Program
June 13, 2024
Accepted for application in
Water-shedding Roof Systems
Acceptance Criteria
None
Product Summary
ULTRASeal SA-HT is a high-temperature rated butyl-based self-adhering underlayment accepted for use as eave or valley protection, or for flashing curbs or other details on water-shedding roofs. ULTRASeal SA-HT does not require priming before installation and is manufactured with a "walkable synthetic grip texture" on the top face that can remain exposed to ultraviolet light for up to nine (9) months.
(adapted from the Technical Data Sheet)
Conditions and Limitations
Accepted by the RGC for use as an underlayment, or as eave and valley protection, in all water-shedding roof systems:
  • May be used in an asphalt shingle roof system, provided the slope is 1:3 (4" in 12") or greater;
  • May be used in an architectural sheet metal (ASM) roof system, provided the slope is 1:6 (2" in 12") or greater.
Technical Data Sheet
Click the "PDF" icon to open the TDS in a new window.
Technical Data Sheet

Back to Accepted Materials

Home