SBS Roof System Details
SBS Roof System Details
Editor's note |
---|
This page is currently under revision, as the details are renumbered and new details and printable detail pages are added. Continue to watch for further updates to the this page and the displayed links. |
- The drawings linked on this page are intended to represent a variety of SBS-modified Bitumen Membrane roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers’ specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
- For further information about SBS-modified Bitumen Membrane System designs and requirements, see SBS Modified Bitumen Membrane Systems.
NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.
1 GENERAL
- SBS 1 - 1.1 Conventionally Insulated System (generic)
- SBS 1 - 1.3 Protected Membrane Roof Assembly (generic)
2 SUPPORTING STRUCTURES: Decks and Walls
3 SECURING the ROOF ASSEMBLY
4 MATERIALS
5 DECK and WALL OVERLAYS
6 AIR and VAPOUR CONTROLS
7 INSULATION
8 INSULATION OVERLAYS
9 FIELD MEMBRANE
10 PERIMETERS and WALLS
- SBS 10.3.5.1-1 Parapet (typical)
- SBS 10.3.5.1-2 Parapet (independent of roof structure)(typical)
- SBS 10.3.5.1-3 Parapet, tall (typical)
- SBS 10.3.5.1-4 Parapet (wall tie-in)
- D1.7.4-1 Counter-flashings & Reglets (Deck - Wall Supported)
- D1.7.4-2 Counter-flashings & Reglets (Deck - Unsupported by Wall)
- D1.7.4-3 Counter-flashings & Reglets (Stucco Wall: Re-roofing)
- D1.7.4-4 Counter-flashings & Reglets (Stucco Wall: New)(Under Construction)
- D1.7.4-5 Counter-flashings & Reglets (Double Surface Reglet)
- D1.7.4-6 Counter-flashings & Reglets (Low Door Sill)
- D1.7.4-7 Counter-flashings & Reglets (Window Curb)
- D1.7.5-3 Roof-Wall Transitions (Fire Separation Joint)
- D1.7.5-4 Roof-Wall Transitions (Fire Separation Wall)
11 11 DRAINS and PENETRATIONS
- D1.7.8-1 Water & Drainage (Cast Iron Drain)
- D1.7.8-2 Water & Drainage (Spun Copper Drain)
- D1.7.8-3 Water & Drainage (Clamping Spun Copper Drain) PDF
- D1.7.8-4 Water & Drainage (Open Wall Scupper)
- D1.7.8-5 Water & Drainage (Through-wall Scupper)
- D1.7.6-1 Curbs & Sleepers (Equipment Sleeper)
- D1.7.6-2 Curbs & Sleepers (Multiple Roof Penetrations)
- D1.7.6-3 Curbs & Sleepers (Basic Curb) PDF
- D1.7.6-4 Curbs & Sleepers (Mechanical Opening) PDF
- D1.7.7-1 Strip-in Flashings (Metal Plumbing)
- D1.7.7-2 Strip-in Flashings (Two-part Cable) PDF
- D1.7.9-1 Miscellaneous Penetrations (Roof Anchor)
- D1.7.9-2 Miscellaneous Penetrations (Wall Anchor - Conventional Roof Assy)
- D1.7.9-3 Miscellaneous Penetrations (Wall Anchor - Protected Roof Assy)
- D1.7.7-3 Strip-in Flashings (Sealant Pocket)
- D1.7.9-4 Miscellaneous Penetrations (Guardrails)