Difference between revisions of "ASM Roof System Details"

Jump to: navigation, search

Difference between revisions of "ASM Roof System Details"

 
(47 intermediate revisions by the same user not shown)
Line 1: Line 1:
:The drawings contained within this section are intended to represent a variety of architectural metal roof system designs and applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the '''''RoofStar Guarantee Program'''''.
+
{{Template:RPM Info}}
  
:For further information about architectural metal roof (ASM) system designs, see '''[[ASM (Architectural Sheet Metal) Roof Systems]]'''.
+
__NONUMBEREDHEADINGS__
 +
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
 +
__NOTOC__
  
<div style="width:300px; text-align: left;">
+
:<big><big>Division D - Construction Details</big></big>
:[[File:ASM Link Drawing.jpg|300 px]]
+
:<hr>
 +
:<big><big><big><big><big>Construction Details for Architectural Sheet Metal (ASM) Roof Systems</big></big></big></big></big>
 +
 
 +
<div class="col-md-2">
 +
:[[File:ASM Project.jpg | link=http://rpm.rcabc.org/images/b/b2/ASM_Project.jpg|175 px]]
 +
</div>
 +
 
 +
<div class="col-md-10">
 +
:The drawings linked on this page are intended to represent a variety of ASM roof system applications while remaining generic with regards to ''manufacturer's'' specific application specifications. They do not represent all possible ''manufacturer'' application roof system designs. Consult each ''manufacturer's'' specifications and the '''''RoofStar Guarantee Standards''''' to develop a system acceptable to both the manufacturer and the '''''RoofStar Guarantee Program'''''.
 +
 
 +
:For further information about Architectural Sheet Metal Roof System designs and requirements, see the '''[https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard Standard for Architectural Sheet Metal (ASM) Roof Systems]'''.
 
</div>
 
</div>
 +
 
<div class="col-md-12">
 
<div class="col-md-12">
<div style="width:40px; vertical-align: center; text-align: left;">
 
[[File:Pdf.png|40 px]]
 
 
</div>
 
</div>
'''NOTE''': 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction DetailsClick on the detail link and look for the icon.
+
<div class="col-md-4">
 +
<hr>
 +
===Part 6 - Air and Vapour Controls===
 +
====='''Continuity and Support''' ([[ASM_Roof_Systems_Standard#6.3.2.1._Continuity_and_Support | Article 6.3.2.1.]])=====
 +
<ol>
 +
<li>[[ASM Air and Vapour Controls (Field) | Air and Vapour Controls (Field)]]
 +
</li></ol>
 +
 
 +
===Part 8 - Eave, Valley, and Field Underlayment===
 +
====='''Eave Protection/Underlayment (Slopes 1:3 or More)''' ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection | Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.3. Underlayment for Common and Steep Slopes | Article 8.3.2.3.]])=====
 +
<ol>
 +
<li>[[ASM Eave Protection and Underlayment | Eave Protection and Underlayment ]]
 +
</li></ol>
 +
 
 +
====='''Eave Protection/Underlayment (Slopes Less Than 1:3)''' ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection | Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.4. Underlayment for Slopes Less Than 1:3 | Article 8.3.2.4.]])=====
 +
<ol>
 +
<li>[[ASM Eave Protection and Underlayment (Low Slopes) | Eave Protection and Underlayment (Low Slopes)]]
 +
</li></ol>
 +
 
 
</div>
 
</div>
<div class="col-md-6">
+
<div class="col-md-4">
 
<hr>
 
<hr>
:[[ASM Details:E1.7.1 (Underlayment / Modified Bitumen Ice Dam Protection)|E1.7.1 Underlayment / Modified Bitumen Ice Dam Protection]]
+
 
:[[ASM Details:E1.7.2 (Modified Bitumen Underlayment / Ice Dam Protection)|E1.7.2 Modified Bitumen Underlayment / Ice Dam Protection]]
+
===Part 10 - Perimeters and Valleys===
:[[ASM Details:E1.7.3 (Eave & Gable Flashing for Standing Seam Systems)|E1.7.3 Eave & Gable Flashing for Standing Seam Systems]]
+
====='''Roof-Wall Connections''' ([[ASM_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])=====
:[[ASM Details:E1.7.4 (Eave & Gable Protection for Proprietary Systems)|E1.7.4 Eave & Gable Protection for Proprietary Systems]]
+
 
:[[ASM Details:E1.7.5 (Metal Valley - Hooked Flashing)|E1.7.5 Metal Valley - Hooked Flashing]]
+
<ol>
:[[ASM Details:E1.7.6 (Metal Valley - Unhooked Flashing)|E1.7.6 Metal Valley - Unhooked Flashing]]
+
<li>[[ASM Roof-Wall Connection (Head-wall) | Roof-Wall Connection (Head-wall)]]
:[[ASM Details:E1.7.7 (Roof-to-Wall Flashing)|E1.7.7 Roof-to-Wall Flashing]]
+
<li>[[ASM Roof-Wall Connection (Head-wall, Vented) | Roof-Wall Connection (Head-wall, Vented)]]
:[[ASM Details:E1.7.8 (Equipment Support Stand / Pipe Flashing)|E1.7.8 Equipment Support Stand / Pipe Flashing]]
+
</li></ol>
:[[ASM Details:E1.7.9 (Equipment Support Stand, Pipe Flashing Split Panel Detail)|E1.7.9 Equipment Support Stand, Pipe Flashing Split Panel Detail]]
+
 
:[[ASM Details:E1.7.10 (Curb for Rooftop Equipment)|E1.7.10 Curb for Rooftop Equipment]]
+
====='''Ridges''' ([[ASM_Roof_Systems_Standard#10.3.4.1._Ridges | Article 10.3.4.1.]])=====
 +
 
 +
<ol>
 +
<li>[[ASM Ridge (Unvented, Uninsulated) | Ridge (Unvented, Uninsulated)]]
 +
<li>[[ASM Ridge (Unvented, Insulated) | Ridge (Unvented, Insulated)]]
 +
<li>[[ASM Ridge (Vented, Uninsulated) | Ridge (Vented, Uninsulated)]]
 +
</li></ol>
 +
 
 +
====='''Eave and Rake Edge Details''' ([[ASM_Roof_Systems_Standard#10.3.4.2._Eaves_and_Rake_Edges | Article 10.3.4.2.]])=====
 +
<ol>
 +
<li>[[ASM Eave and Rake Edges (Mechanical Seams)  | Eave and Rake Edges (Mechanical Seams)]]
 +
<li>[[ASM Eave and Rake Edges (Snap-Lock Seams) | Eave and Rake Edges (Snap-Lock Seams)]]
 +
<li>[[ASM Eave and Rake Edges (Copper) | Eave and Rake Edges (Copper)]]
 +
<li>[[ASM Eave and Rake Edges (Zinc) | Eave and Rake Edges (Zinc)]]
 +
</li></ol>
 +
 
 +
====='''Valleys''' ([[ASM_Roof_Systems_Standard#10.3.5.2._General_Requirements_for_Valley_Metal_Flashing | Article 10.3.5.2.]])=====
 +
 
 +
<ol>
 +
<li>[[ASM Valley (Hooked) | Valley (Hooked)]]
 +
<li>[[ASM Valley (Unhooked) | Valley (Unhooked)]]
 +
</li></ol>
 +
 
 
</div>
 
</div>
<div class="col-md-6">
+
<div class="col-md-4">
 
<hr>
 
<hr>
:[[ASM Details:E1.7.11 (Ridge / Hip Cap Flashing)|E1.7.11 Ridge / Hip Cap Flashing]]
+
 
:[[ASM Details:E1.7.12 (Notched Ridge / Hip Cap Flashing)|E1.7.12 Notched Ridge / Hip Cap Flashing]]
+
===Part 11 - Drainage===
:[[ASM Details:E1.7.13 (Vented Ridge / Hip Cap Flashing)|E1.7.13 Vented Ridge / Hip Cap Flashing]]
+
====='''Membrane Gutters''' ([[ASM_Roof_Systems_Standard#11.3.3.8._Membrane_Gutters | Article 11.3.3.8.]])=====
:[[ASM Details:E1.7.14 (Proprietary Vented Ridge / Hip Cap Flashing)|E1.7.14 Proprietary Vented Ridge / Hip Cap Flashing]]
+
 
:[[ASM Details:E1.7.15 (Proprietary Vented Wall Flashing)|E1.7.15 Proprietary Vented Wall Flashing]]
+
<ol>
:[[ASM Details:E1.7.16 (Built-in Gutter Membrane / Underlayment / Vapour Barrier Transition)|E1.7.16 Built-in Gutter Membrane / Underlayment / Vapour Barrier Transition]]
+
<li>[[ASM Membrane Gutter (Design Elements) | Membrane Gutter (Design Elements)]]
:[[ASM Details:E1.7.17 (Built-in Gutter)|E1.7.17 Built-in Gutter]]
+
<li>[[ASM Membrane Gutter (Insulated Assembly) | Membrane Gutter (Insulated Assembly)]]
:[[ASM Details:E1.7.18 (Copper Standing Seam Systems Eave & Gable Flashing)|E1.7.18 Copper Standing Seam Systems Eave & Gable Flashing]]
+
</li></ol>
:[[ASM Details:E1.7.19 (Zinc Standing Seam Systems Eave & Gable Flashing)|E1.7.19 Zinc Standing Seam Systems Eave & Gable Flashing]]
+
 
 +
===Part 12 - Penetrations and Curbs===
 +
====='''Penetration Flashing''' ([[ASM_Roof_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])=====
 +
 
 +
<ol>
 +
<li>[[ASM Cylindrical Penetration (Flexible Boot Flashing) | Cylindrical Penetration (Flexible Boot Flashing)]]
 +
<li>[[ASM Cylindrical Penetration (Split Panel Flashing) | Cylindrical Penetration (Split Panel Flashing)]]
 +
</li></ol>
 +
 
 +
====='''Curbs''' ([[ASM_Roof_Systems_Standard#12.3.2.4._Curbs_and_Sleepers | Article 12.3.2.4.]])=====
 +
 
 +
<ol>
 +
<li>[[ASM Curb (Split Panel Flashing) | Curb (Split Panel Flashing)]]
 +
</li></ol>
 +
 
 +
===Part 13 - Linear Metal Flashing===
 +
:See the separate page, [[Linear_Metal_Flashing_Details | Details for Linear Metal Flashings]].
 +
 
 
</div>
 
</div>
 +
 
<div class="col-md-12">
 
<div class="col-md-12">
 +
<hr>
  
 +
[[ASM Roof Systems Standard|<i class="fa fa-chevron-circle-left" ></i> ''Standard for ASM Roof Systems'']]
  
 
+
[[Main Page | <i class="fa fa-home fa"></i> Home]]
[[ASM (Architectural Sheet Metal)|<i class="fa fa-chevron-circle-left" ></i> Back to ''ASM Roof Systems'']]
+
{{Template:RPM Page Footer with Copyright and Current Date}}
 
 
[[Construction Details|<i class="fa fa-chevron-circle-left" ></i> Back to ''Construction Details Section'']]
 
 
</div>
 
</div>

Latest revision as of 20:11, 28 June 2022



Division D - Construction Details

Construction Details for Architectural Sheet Metal (ASM) Roof Systems
ASM Project.jpg
The drawings linked on this page are intended to represent a variety of ASM roof system applications while remaining generic with regards to manufacturer's specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturer's specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
For further information about Architectural Sheet Metal Roof System designs and requirements, see the Standard for Architectural Sheet Metal (ASM) Roof Systems.

Part 6 - Air and Vapour Controls

Continuity and Support ( Article 6.3.2.1.)
  1. Air and Vapour Controls (Field)

Part 8 - Eave, Valley, and Field Underlayment

Eave Protection/Underlayment (Slopes 1:3 or More) ( Article 8.3.2.1. and Article 8.3.2.3.)
  1. Eave Protection and Underlayment
Eave Protection/Underlayment (Slopes Less Than 1:3) ( Article 8.3.2.1. and Article 8.3.2.4.)
  1. Eave Protection and Underlayment (Low Slopes)

Standard for ASM Roof Systems

Home

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.