Difference between revisions of "ASM Valley (Hooked)"

Jump to: navigation, search

Difference between revisions of "ASM Valley (Hooked)"

(RELATED WORK BY OTHERS)
Line 28: Line 28:
 
(A) <b>Acceptable Deck</b>  
 
(A) <b>Acceptable Deck</b>  
  
NOTE: * Refer to <i>RGC Guarantee Standards</i> for additional requirements.  
+
 
 +
'''NOTE''': Refer to <i>RGC Guarantee Standards</i> for additional requirements.
 +
 
  
 
<hr>
 
<hr>

Revision as of 18:52, 19 July 2016


File:8.1.4.5.1.jpg


1 WORK INCLUDED

(1) Valley Protection Membrane: Accepted self-adhered modified bituminous eave protection membrane.

(2) Underlayment: The type of underlay required is determined by roof slope (see Section 8.1.4.1 and Section 8.1.4.2).

(3) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.

(4) Valley Metal Panel: Preformed with centre rib and built-in continuous lock.

(5) Fastening: Metal valley panels to be secured with compatible, non-corrosive, flat head fasteners 200 mm (8") o/c. Metal roof panel to metal valley panel overlap must be a minimum of 125 mm (5").

(6) Membrane Strip-In: Accepted self-adhered modified bituminous eave protection membrane.

(7) Architectural Metal Roof Panel

(8) Continuous Built-In Hook Strip

(9) Valley Panel Overlap : Set in two continuous rows of accepted caulking or sealant tape.


2 RELATED WORK BY OTHERS

(A) Acceptable Deck


NOTE: Refer to RGC Guarantee Standards for additional requirements.





Back to ASM Application

Back to ASM Construction Details

Back to Construction Details