Asphalt Shingle System Details

Jump to: navigation, search

Asphalt Shingle System Details

Revision as of 20:36, 19 July 2016 by James Klassen (talk | contribs)

The drawings contained within this section are intended to represent a variety of asphalt shingle applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and RGC.

For further information about asphalt shingle roof designs and requirements, see Asphalt Shingles Roof Systems.


E2.7.1 Shingle Application - All Slopes
E2.7.2 Low Slope Shingle Application
E2.7.3 Open Valley
E2.7.4 Closed Cut Valley
E2.7.5 Woven Valley
E2.7.6 Upper Junction Detail - Asphalt Shingle at BUR
E2.7.7 Lower Junction Detail - Asphalt Shingle at BUR
E2.7.8 Eave Detail - All Slopes
E2.7.9 Chimney Flashing Detail
E2.7.10 Lead Vent - Typical
E2.7.11 Counter-flashing - Diverter Flashing
E2.7.12 Integral Flashing with Capillary Table


Back to Asphalt Shingle Roof Systems

Back to Construction Details Section