Difference between revisions of "Asphalt Shingles - Application (Common and Steep Slopes)"
Difference between revisions of "Asphalt Shingles - Application (Common and Steep Slopes)"
m (James Klassen moved page Asphalt Shingles Application (Common and Steep Slopes) to Asphalt Shingles - Application (Common and Steep Slopes)) |
|||
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Template:RPM Info}} | {{Template:RPM Info}} | ||
| − | { | + | {{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}} |
| − | | | + | __NOTOC__ |
| − | + | ||
| + | <big><big>Division D - Construction Details</big></big> | ||
| + | <hr> | ||
| + | <big><big><big><big><big>Asphalt Shingles | Application (Common and Steep Slopes) ([[Asphalt_Shingle_Systems_Standard#9.3.2.4. General Requirements for Asphalt Shingle Application | Article 9.3.2.4.]])</big></big></big></big></big> | ||
| + | {{Template:Construction Details Header}} | ||
<div class="panel panel-success"> | <div class="panel panel-success"> | ||
<div class="panel-heading"><big>'''Asphalt Shingle Details'''</big></div> | <div class="panel-heading"><big>'''Asphalt Shingle Details'''</big></div> | ||
| Line 10: | Line 14: | ||
<div style="text-align:center; vertical-align:center"> | <div style="text-align:center; vertical-align:center"> | ||
<big>Applicable to slopes 1:3 (4" in 12") and greater.</big> | <big>Applicable to slopes 1:3 (4" in 12") and greater.</big> | ||
| − | [[File:7.1.2.1.1.jpg|class=img-responsive]] | + | [[File:7.1.2.1.1.jpg| link= http://rpm.rcabc.org/images/6/6f/7.1.2.1.1.jpg | class=img-responsive]] |
</div> | </div> | ||
</div><!-- COL-MD-6 --> | </div><!-- COL-MD-6 --> | ||
| Line 16: | Line 20: | ||
<div class="col-md-6"> | <div class="col-md-6"> | ||
=== WORK INCLUDED === | === WORK INCLUDED === | ||
| − | ;(1) [[ | + | ;(1) [[Asphalt Shingle Systems Standard|'''Eave Protection''']]: One ply of self-adhered modified bituminous underlayment material or other acceptable eaves protection. Lap 75 mm (3") minimum on sides and 150 mm (6") minimum on ends. |
| − | ;(2) [[ | + | ;(2) [[Asphalt Shingle Systems Standard#AShUNDERLAYMENT|'''Underlayment''']]: Minimum one ply of No. 15 non-perforated asphalt saturated felt or accepted eaves protection. Overlap 50 mm (2") minimum on side laps and 150 mm (6") minimum on end laps. |
| − | ;(3) [[ | + | ;(3) [[Asphalt Shingle Systems Standard#AShPERIM-GEN-APPLICATION|'''Edge Metal Flashing''']]: Required for all eave and rake edges. |
| − | ;(4) [[ | + | ;(4) [[Asphalt Shingle Systems Standard#AShPART9GEN-APPLICATION|'''Starter Course''']]: '''Standard strip, laminated or architectural shingle''' starter course consists of proprietary starter shingles or (in the case of strip shingles) the same type shingles used in the field. Install according to requirements in Subsection '''9.3.1 General''', together with the Manufacturer's printed application instructions. |
;(5) '''Standard Strip, Laminated or Architectural Shingles''': Applied as recommended by manufacturer. | ;(5) '''Standard Strip, Laminated or Architectural Shingles''': Applied as recommended by manufacturer. | ||
| − | ;(6) [[ | + | ;(6) [[Asphalt Shingle Systems Standard#AShSECUREMENT|'''Nailing''']]: See the requirements in Section '''3.3 Application'''. |
<hr> | <hr> | ||
=== RELATED WORK BY OTHERS === | === RELATED WORK BY OTHERS === | ||
| − | ;(A) [[ | + | ;(A) [[Asphalt Shingle Systems Standard#AShDECKS|'''Acceptable Deck''']] |
</div><!-- COL-6-MD --> | </div><!-- COL-6-MD --> | ||
</div><!-- PANEL BODY --> | </div><!-- PANEL BODY --> | ||
</div><!-- PANEL --> | </div><!-- PANEL --> | ||
| − | '''NOTE''': | + | '''NOTE''': See the [[Asphalt Shingle Systems Standard | '''Standard''']] for additional requirements. |
<hr> | <hr> | ||
| + | [[Asphalt Shingle System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Asphalt Shingle System Details'']] | ||
| − | [[ | + | [[Main Page | <i class="fa fa-home fa"></i> Home]] |
| − | |||
| − | |||
| − | + | {{Tempate:RPM Page Footer with Copyright and Current Date}} | |
Latest revision as of 14:29, 30 June 2022
Division D - Construction Details
Asphalt Shingles | Application (Common and Steep Slopes) ( Article 9.3.2.4.)
| Notice to Reader | |
| Images used in a Construction Detail are representative and not prescriptive, and are not necessarily drawn to scale. They are intended to support the related Standard (Ref. Division A, Article 2.2.1.2.).
The reader may link to the related Article in the detail title, or link to the Standard as it relates to a specific element in the detail. All hyperlinks are displayed blue text. | |
Asphalt Shingle Details
Applicable to slopes 1:3 (4" in 12") and greater.
1 WORK INCLUDED
- (1) Eave Protection
- One ply of self-adhered modified bituminous underlayment material or other acceptable eaves protection. Lap 75 mm (3") minimum on sides and 150 mm (6") minimum on ends.
- (2) Underlayment
- Minimum one ply of No. 15 non-perforated asphalt saturated felt or accepted eaves protection. Overlap 50 mm (2") minimum on side laps and 150 mm (6") minimum on end laps.
- (3) Edge Metal Flashing
- Required for all eave and rake edges.
- (4) Starter Course
- Standard strip, laminated or architectural shingle starter course consists of proprietary starter shingles or (in the case of strip shingles) the same type shingles used in the field. Install according to requirements in Subsection 9.3.1 General, together with the Manufacturer's printed application instructions.
- (5) Standard Strip, Laminated or Architectural Shingles
- Applied as recommended by manufacturer.
- (6) Nailing
- See the requirements in Section 3.3 Application.
2 RELATED WORK BY OTHERS
- (A) Acceptable Deck
NOTE: See the Standard for additional requirements.
Back to Asphalt Shingle System Details
© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.