Asphalt Shingles - Cylindrical Penetration (Flashing, Storm Collar)

Jump to: navigation, search

Asphalt Shingles - Cylindrical Penetration (Flashing, Storm Collar)

Revision as of 21:27, 2 February 2021 by James Klassen (talk | contribs)
RoofStar Guarantee Standards are blue-linked
Asphalt Shingle Details

ASh 11.3.1.jpg

1 WORK INCLUDED

(1) Underlayment
Self-adhering or mechanically fastened, depending upon the designed slope (see 8.1.2 Design). Install “shingle-style” and overlap roll ends at least 150 mm (6”); side laps must be at least 75 mm (3”).
(2) Penetration flashing
Conforming to material standards in 11.2 Materials. Drawing shows cut-away, for illustrative purposes only.
(3) Horseshoe patch
Self-adhered membrane cut to fit penetration flashing flange and extend beyond flange edges as shown in drawing and required in 11.3.1 General.
(4) Underlayment patch
Overlaps the horseshoe patch and fits beneath the upper course of underlayment material.
(5) Drainage path (top of penetration flashing)
Minimum 12 mm (1/2”).
(6) Drainage path (side of penetration flashing)
Minimum 19 mm (3/4’).
(7) Exposed fasteners
Cladding fasteners with gasketed washers. See 11.3.1 General and 13.2.3 Fasteners.
(8) Storm collar
Required for pipe-type flashings (see 11.3.3 Penetrations and Vents). Caulked with an untooled bead of an acceptable sealant.

2 RELATED WORK BY OTHERS

(A) Penetration
(B-vent shown)

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.



RoofStar Guarantee Standards for Asphalt Shingle Systems

Back to Asphalt Shingles Construction Details

Back to Construction Details