Difference between revisions of "Cedar Shake & Shingle System Details"

Jump to: navigation, search

Difference between revisions of "Cedar Shake & Shingle System Details"

Line 1: Line 1:
 +
The drawings contained within this section are intended to represent a variety of cedar shake and shingle applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and RGC.
 +
 +
For further information about cedar shake and shingle roof designs, see '''[[Cedar Shakes & Shingles Roof Systems]]'''.
 +
 +
 
:[[CS Details:E3.7.1 (Valleys)|E3.7.1 Valleys]]
 
:[[CS Details:E3.7.1 (Valleys)|E3.7.1 Valleys]]
 
:[[CS Details:E3.7.2 (Flashings)|E3.7.2 Flashings]]
 
:[[CS Details:E3.7.2 (Flashings)|E3.7.2 Flashings]]

Revision as of 20:35, 19 July 2016

The drawings contained within this section are intended to represent a variety of cedar shake and shingle applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and RGC.

For further information about cedar shake and shingle roof designs, see Cedar Shakes & Shingles Roof Systems.


E3.7.1 Valleys
E3.7.2 Flashings
E3.7.3 Hip & Ridge Caps
E3.7.4 Built-in Gutters


Back to Cedar Shakes & Shingles Roof Systems

Back to Construction Details