EPDM Conventionally Insulated System (Alternate)

Division D - Construction Details

EPDM 1.3.1-2 Conventionally Insulated System (adhered)

Notice to Reader
Images used in a Construction Detail are representative and not prescriptive. Nor are they necessarily drawn to scale. Rather, they are provided to visually convey the requirements of the Standard they represent. Unless otherwise required by the Standard, dimensions, the selection of materials and their application remains the responsibility of the Design Authority. The full text of the referenced requirements in the Standard may be read by using the blue hyperlinks

EPDM Details

(1) Vapour Retarder: If required by design authority.
(2) Insulation: Mechanically attached where deck type permits. Installed according to RoofStar Guarantee Standards. See available insulation products in the Accepted Materials section of this Manual.
(3) Adhesive: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
(4) Single-ply Membrane: Installed according to manufacturer's instructions and RoofStar Guarantee Standards.
(5) Membrane Lap: Thermoset membrane may be joined using uncured tape or proprietary adhesive.
(6) Edge Flashing: Proprietary.
(7) Membrane Flashing: Installed according to manufacturer's instructions.

NOTE: See the Standard for additional requirements.

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.