EPDM Roof System Details

Jump to: navigation, search

EPDM Roof System Details

Revision as of 16:23, 30 August 2021 by James Klassen (talk | contribs)


Construction Details for EPDM Membrane Roof Systems

Editor's note
This page is currently under revision, as the details are renumbered and new details and printable detail pages are added. Continue to watch for further updates to the this page and the displayed links.
The drawings contained within this section are intended to represent a variety of thermoset membrane roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
For further information about thermoset membrane (EPDM) system designs and requirements, see Standard for EPDM Membrane Roof Systems.
EPDM Link Drawing.jpg

Pdf.png

NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.


1 GENERAL

EPDM 1.3.1-1 Conventionally Insulated System (mechanically attached)
EPDM 1.3.1-2 Conventionally Insulated System (adhered)
EPDM 1.3.1-3 Protected Membrane Roof Assembly (typical)


2 SUPPORTING STRUCTURES: Decks and Walls

3 SECURING the ROOF ASSEMBLY

4 MATERIALS

5 DECK and WALL OVERLAYS

6 AIR and VAPOUR CONTROLS

6.3.1 Air and Vapour Controls (field)

7 INSULATION

8 INSULATION OVERLAYS

9 FIELD MEMBRANE

10 PERIMETERS and WALLS


11 DRAINS and PENETRATIONS

12 PROTECTED MEMBRANES and OTHER DETAILS

13 METAL FLASHINGS

14 THE ROOF as a PLATFORM



Back to EPDM (Thermoset) Membrane Systems

Back to Construction Details Section

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.