Difference between revisions of "Linear Metal Flashing Details"

Jump to: navigation, search

Difference between revisions of "Linear Metal Flashing Details"

Line 1: Line 1:
 
The drawings contained within this section are intended to represent a variety of sheet metal flashing applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and RGC.
 
The drawings contained within this section are intended to represent a variety of sheet metal flashing applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and RGC.
  
For further information about sheet metal flashing designs and requirements, see '''[[RoofStar Guarantee Standards for SBS Roof Systems#METAL-SBS|METAL PERIMETER FLASHINGS (SBS)]]''' or parallel sections for EPDM and TPO/PVC membranes, in the RoofStar Guarantee Standards.
+
For further information about sheet metal flashing designs and requirements, see '''[[RoofStar Guarantee Standards for SBS Roof Systems#METAL-SBS|Metal Perimeter Flashing (SBS)]]''' or parallel sections for EPDM and TPO/PVC membranes, in the RoofStar Guarantee Standards.
  
  

Revision as of 20:52, 19 July 2016

The drawings contained within this section are intended to represent a variety of sheet metal flashing applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and RGC.

For further information about sheet metal flashing designs and requirements, see Metal Perimeter Flashing (SBS) or parallel sections for EPDM and TPO/PVC membranes, in the RoofStar Guarantee Standards.


G1.7.1 Metal Flashings (Cap Flashings - Joint Ends)
G1.7.2 Metal Flashings (Inside Parapet Corner)
G1.7.3 Metal Flashings (Parapet-to-Wall Transition - Site Formed)
G1.7.4 Metal Flashings (Parapet-to-Wall Transition - Shop Formed)


Back to Construction Details Section