Manufacturers:ZinCo Canada Inc.

Jump to: navigation, search

Manufacturers:ZinCo Canada Inc.



Division C - Accepted Materials


ZinCo Canada Inc.
Affiliate Member (Accepted Manufacturer of Vegetated Roof Systems)

Systems/Materials Listed by Category under Tabs Above


The information published in the RCABC Roofing Practices Manual and offered under each tab does NOT represent a complete set of the manufacturer’s data or specifications, nor is any listed system or material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Affiliate Member: ZinCo Canada Inc.
Website
https://www.zinco.ca/
Contact Address & Services
See the current Membership list, contact information and list of services at www.rcabc.org
System/Materials Acceptance
Pursuant to RCABC policy, this Affiliate Member of the RCABC is accepted as a manufacturer of vegetated roof systems, expressly for use in a roof assembly intended to qualify for a RoofStar Vegetated Roof Guarantee. For more about the Guarantee, see Division A of the RPM, and consult the Standard for Vegetated Roofs.

* System is designed for a protected membrane roof assembly, also known as an inverted roof assembly.
** Semi-intensive, Intensive, and Hybrid (blue-green) vegetated roof systems are only permitted on protected membrane roofs (PMR); see Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs". Any deviation to the "Standard for Vegetated Roofs" must be made by submitting a request to the RGC for a written Variance, as defined in Article 1.1.3.6.

Home

© RCABC 2025
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.