Manufacturers:Siplast, Inc.

Jump to: navigation, search

Manufacturers:Siplast, Inc.

Revision as of 22:03, 8 September 2021 by James Klassen (talk | contribs)



Division C - Accepted Materials


Siplast
Associate Member (Manufacturer)

The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise.
Manufacturer: Siplast
Website
http://www.siplast.com
Contact Address
See the current Membership list and contact information at www.rcabc.org
Click the heading for a material type to link to tables displaying all other Accepted Materials in the same category
Materials shown with "TA" after the name have been used in wind-resistant Tested Assemblies. See also Securing the Roof Assembly and links to MARS, PARS and AARS material tables.



Roofs cont.

Base Membranes (for use only with ParaPro PMMA Roof Membrane Resin)
Paradiene 20 EG TG P
Paradiene 20 P
Paradiene 20 SA P
Paradiene 20 TG P
Paradiene 20 TS P
Paradiene 20 TS SA P
Cap Membranes
Paradiene 30 FR
Paradiene 30 HT TG
Paradiene 30 TG (TA)
Paradiene 30 TG (Eco-Active)
Paradiene 30 (TA)
Paradiene 30 FR TG
Paradiene 30 HT FR
Paradiene 30 HT FR TG
Paradiene 30 HT
Paradiene 40 (awaiting TDS)
Paradiene 40 FR
Paradiene 40 FR TG
Parafor 30
Parafor 30 TG
Parafor 30 TG (Eco-Active) (awaiting TDS)
Parafor 50 LT
Parafor 50 TG
Veral AL Polar White Spectra
Veral AL (Aluminum)
Veral SS
Teranap (1m x 8m)
Teranap 431 (2m x 20m)
Single-ply Membranes
Parafor 50 LT
Parafor 50 TG

Liquid Membrane Systems (Field Application)

For a complete list of Technical Data Sheets, click on the system link below. Note that this field-applied liquid membrane may be used only on:

  • epoxy primer-treated concrete (Protected Membrane Roof Assemblies and Plaza Waterproofing) or
  • with Paradiene "P" membranes (listed on this page).

ParaPro PMMA Roof Membrane Resin

Liquid Membrane Flashing

Two-part Reinforced Liquid Membrane Flashing

Parapro 123 Flashing Resin



Grade-level Waterproofing

Waterproofing Membrane Systems

SBS 2-Ply Membrane Systems
SBS Waterproofing Installation Guidelines
Base Membranes
Teranap 431 (2m x 20m)
Teranap (1m x 8m)
Cap Membranes
Teranap 431 (2m x 20m)
Teranap (1m x 8m)

Liquid Membrane Systems (Field Application)

For a complete list of Technical Data Sheets, click on the system link below. Note that this field-applied liquid membrane may be used only on:

  • epoxy primer-treated concrete (Protected Membrane Roof Assemblies and Plaza Waterproofing) or
  • with Paradiene "P" membranes (listed on this page).

ParaPro PMMA Roof Membrane Resin

Liquid Membrane Flashing

Two-part Reinforced Liquid Membrane Flashing

Parapro 123 Flashing Resin

Accessories

An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the water or wind resistance of the Waterproofing or Water-shedding system. An Accessory is not an Accepted Material and therefore the RoofStar Guarantee does not extend to cover any potential material or installation failure. Accessories are listed in the Roofing Practices Manual merely for reference to specifiers, designers and installers.

Accepted Materials

Home

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.