Difference between revisions of "Materials:2-1 SopraSmart Board ISO HD"

Jump to: navigation, search

Difference between revisions of "Materials:2-1 SopraSmart Board ISO HD"

Line 11: Line 11:
 
;Accepted for '''''RoofStar Guarantee Program''''': Date TBA
 
;Accepted for '''''RoofStar Guarantee Program''''': Date TBA
 
;:
 
;:
;'''Product Summary''':  
+
;'''Product Summary''': '''Soprasmart ISO HD 180''' is a high density composite panel composed of a non-woven polyester reinforced membrane with a thermofusible/sanded surface, laminated on an HD (100psi) polyisocyanurate insulation panel.  The base sheet is offset from the board on two adjacent edges (1 inch on one end and 3-1/2 inches on 1 side) to provide shiplap; other edges are square.  To ensure a secure installation, the side lap is made with a patented DUO-SELVEDGE unique to Soprema (60% self-adhesive and 40% thermofusible).  Its self-adhesive component protects combustible surfaces and its thermofusible properties provide an efficient seal. End laps can be aligned then sealed by heat welding a minimum 12" wide membrane reinforcing strip centered over the end lap.  Soprasmart ISO HD 180 can be mechanically fastened or adhered with Duotack adhesive.
Soprasmart ISO HD 180 is a high density composite panel composed of a non-woven polyester reinforced membrane with a thermofusible/sanded surface, laminated on an HD (100psi) polyisocyanurate insulation panel.  The base sheet is offset from the board on two adjacent edges (1 inch on one end and 3-1/2 inches on 1 side) to provide shiplap; other edges are square.  To ensure a secure installation, the side lap is made with a patented DUO-SELVEDGE unique to Soprema (60% self-adhesive and 40% thermofusible).  Its self-adhesive component protects combustible surfaces and its thermofusible properties provide an efficient seal. End laps can be aligned then sealed by heat welding a minimum 12" wide membrane reinforcing strip centered over the end lap.  Soprasmart ISO HD 180 can be mechanically fastened or adhered with Duotack adhesive.
 
  
Soprasmart Board 180 can be used for the following applications:
+
:'''Soprasmart Board 180''' can be used for the following applications:
* an overlay board and base sheet on all types of insulation
+
:* an overlay board and base sheet on all types of insulation
* a recovery board and base sheet on existing roofing
+
:* a recovery board and base sheet on existing roofing
* an overlay board and base sheet on wood decks
+
:* an overlay board and base sheet on wood decks
 +
 
 +
:PROPERTIES:
 +
:<table border=0 cellpadding=5 cellspacing=0>
 +
<tr>
 +
<td></td>
 +
<td>Standards</td>
 +
<td>Soprasmart ISO HD 180</td>
 +
</tr>
 +
<tr>
 +
<td>Board Dimensions</td>
 +
<td>-</td>
 +
<td>0.91m x 2.44m (3 x 8 ft)</td>
 +
</tr>
 +
<tr>
 +
<td>Total Thickness (mm)</td>
 +
<td>-</td>
 +
<td>15 mm (19/32")</td>
 +
</tr>
 +
<tr>
 +
<td>Membrane Reinforcement</td>
 +
<td>-</td>
 +
<td>non-woven polyester</td>
 +
</tr>
 +
<tr>
 +
<td>Total Weight</td>
 +
<td>-</td>
 +
<td>4.26kg/m2 (0.87lb/sf)</td>
 +
</tr>
 +
<tr>
 +
<td>Top Surface</td>
 +
<td>-</td>
 +
<td>film or sand</td>
 +
</tr>
 +
<tr>
 +
<td>Underface</td>
 +
<td>-</td>
 +
<td>Polyisocyanurate HD</td>
 +
</tr>
 +
<tr>
 +
<td>Membrane Thickness</td>
 +
<td>-</td>
 +
<td>2.2mm (86.6 mils)</td>
 +
</tr>
 +
<tr>
 +
<td>Breaking Strength, MD / XD</td>
 +
<td>37GP56M</td>
 +
<td>17.0 / 12.5 kN/m</td>
 +
</tr>
 +
<tr>
 +
<td>Ultimate Elongation, MD / XD </td>
 +
<td>37GP56M</td>
 +
<td>60/65%</td>
 +
</tr>
 +
<tr>
 +
<td>Tear Strength</td>
 +
<td>ASTM D5601</td>
 +
<td>60N</td>
 +
</tr>
 +
<tr>
 +
<td>Cold Bending - initial</td>
 +
<td>37GP56M</td>
 +
<td>-30</td>
 +
</tr>
 +
<tr>
 +
<td>Cold Bending -90 days at 70&deg;C</td>
 +
<td>37GP56M</td>
 +
<td>-30</td>
 +
</tr>
 +
<tr>
 +
<td>Board Thickness</td>
 +
<td>-</td>
 +
<td>12.7 mm (1/2")</td>
 +
</tr>
 +
<tr>
 +
<td>Thermal Resistance (R-Value) at 24C (75F)</td>
 +
<td>-</td>
 +
<td>ASTM C518 R2.5</td>
 +
</tr>
 +
<tr>
 +
<td>Compressive Strength</td>
 +
<td>ASTM D1621</td>
 +
<td>>689kPa(100psi)</td>
 +
</tr>
 +
<tr>
 +
<td>Dimensional Stability</td>
 +
<td>ASTM D2126</td>
 +
<td><0.5% linear change (7 day)</td>
 +
</tr>
 +
<tr>
 +
<td>Water Absorption</td>
 +
<td>ASTM C209</td>
 +
<td><1% by volume</td>
 +
</tr>
 +
<tr>
 +
<td>Resistance to Mold</td>
 +
<td>ASTM D3273</td>
 +
<td>Passed (10)</td>
 +
</tr>
 +
<tr> <td>Service Temperature</td>
 +
<td>-</td>
 +
<td><127C (260F)</td>
 +
</tr>
 +
<tr>
 +
<td>All values are nominal</td>
 +
<td></td>
 +
<td></td>
 +
</tr>
 +
</table>
 +
 
 +
 
 +
Soprema Inc. may modify the composition of its products without prior notice.  Consequently orders will be filled according to the latest specification.
 
|}
 
|}
  

Revision as of 15:03, 4 November 2016

Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Soprema Inc.
Accepted for RoofStar Guarantee Program
Date TBA
Product Summary
Soprasmart ISO HD 180 is a high density composite panel composed of a non-woven polyester reinforced membrane with a thermofusible/sanded surface, laminated on an HD (100psi) polyisocyanurate insulation panel. The base sheet is offset from the board on two adjacent edges (1 inch on one end and 3-1/2 inches on 1 side) to provide shiplap; other edges are square. To ensure a secure installation, the side lap is made with a patented DUO-SELVEDGE unique to Soprema (60% self-adhesive and 40% thermofusible). Its self-adhesive component protects combustible surfaces and its thermofusible properties provide an efficient seal. End laps can be aligned then sealed by heat welding a minimum 12" wide membrane reinforcing strip centered over the end lap. Soprasmart ISO HD 180 can be mechanically fastened or adhered with Duotack adhesive.
Soprasmart Board 180 can be used for the following applications:
  • an overlay board and base sheet on all types of insulation
  • a recovery board and base sheet on existing roofing
  • an overlay board and base sheet on wood decks
PROPERTIES:
Standards Soprasmart ISO HD 180
Board Dimensions - 0.91m x 2.44m (3 x 8 ft)
Total Thickness (mm) - 15 mm (19/32")
Membrane Reinforcement - non-woven polyester
Total Weight - 4.26kg/m2 (0.87lb/sf)
Top Surface - film or sand
Underface - Polyisocyanurate HD
Membrane Thickness - 2.2mm (86.6 mils)
Breaking Strength, MD / XD 37GP56M 17.0 / 12.5 kN/m
Ultimate Elongation, MD / XD 37GP56M 60/65%
Tear Strength ASTM D5601 60N
Cold Bending - initial 37GP56M -30
Cold Bending -90 days at 70°C 37GP56M -30
Board Thickness - 12.7 mm (1/2")
Thermal Resistance (R-Value) at 24C (75F) - ASTM C518 R2.5
Compressive Strength ASTM D1621 >689kPa(100psi)
Dimensional Stability ASTM D2126 <0.5% linear change (7 day)
Water Absorption ASTM C209 <1% by volume
Resistance to Mold ASTM D3273 Passed (10)
Service Temperature - <127C (260F)
All values are nominal


Soprema Inc. may modify the composition of its products without prior notice. Consequently orders will be filled according to the latest specification.

Click below for the Technical Data Sheet.
Technical Data Sheet



Back to Accepted Materials


Home