Difference between revisions of "Materials:Alsan RS System"

Jump to: navigation, search

Difference between revisions of "Materials:Alsan RS System"

Line 9: Line 9:
 
| '''Manufacturer''': [http://soprema.ca/  '''Soprema Inc.''']
 
| '''Manufacturer''': [http://soprema.ca/  '''Soprema Inc.''']
 
;:  
 
;:  
;Accepted for '''''RoofStar Guarantee Program''''': TBA
+
;Accepted for '''''RoofStar Guarantee Program''''': Date TBA
 
;:
 
;:
 
;'''Product Summary''': The Alsan RS System includes the ''Accepted Materials'' '''Alsan RS 230 Flash''' and '''Alsan Flashing''', which are complemented by:
 
;'''Product Summary''': The Alsan RS System includes the ''Accepted Materials'' '''Alsan RS 230 Flash''' and '''Alsan Flashing''', which are complemented by:

Revision as of 19:25, 28 November 2016

Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Soprema Inc.
Accepted for RoofStar Guarantee Program
Date TBA
Product Summary
The Alsan RS System includes the Accepted Materials Alsan RS 230 Flash and Alsan Flashing, which are complemented by:
  • Alsan RS Fleece
  • Alsan RS 276 Primer
  • Alsan RS 222 Primer
  • Alsan RS Catalyst Powder
The Alsan Flashing is a waterproofing one-component polyurethane / bitumen coating. It is used for the upstands and roofing details where it is difficult to apply waterproofing membranes (example: complex upstands with numerous angles, hard to reach areas due to their narrowness or their environment, circular flashings, etc.).
Alsan Flashing is ready to use. It is installed directly over traditional bituminous waterproofing or approved substrates. This liquid waterproofing process applies where torches are prohibited or dangerous (example: inflammable environments, skylight flashings, etc.).
The Alsan Flashing has a 100 g/m², 150 mm (6") wide reinforcement that must be installed at all angles and joints between two supports.
ALSAN FLASHING
Definition
Ready to use waterproofing, one component polyurethane / bitumen coating.
Application
Upstands and roof details.
Presentation
Thixotropic paste (mixing reduces the viscosity).
Colour
Brown
Viscosity
Brookfield at 25ºC 35 000 centipoises
Solids Contents
80% ± 2%
Flash Point
2.5ºC
Format
19 litre container
Inflammable
Yes
Covering Power
0.75 l/m² (19 litres covers 25m² (270 ft²))
FLASHING REINFORCEMENT
Definition
Flexible reinforcement made of a woven 100 g/m² polyester.
Application
Upstand angles, support junctions and joints.
Format
0.15 m (6") wide x 30.5 m (100 ft) long strip.
Click below for the Technical Data Sheets
Alsan RS 230 Flash - Technical Data Sheet
Alsan RS 230 Flash TDS
Alsan Flashing - Technical Data Sheet
Alsan Flashing TDS
Alsan RS Fleece - Technical Data Sheet
Alsan RS Fleece TDS
Alsan RS 276 Primer - Technical Data Sheet
Alsan RS 276 Primer TDS
Alsan RS 222 Primer - Technical Data Sheet
Alsan RS 222 Primer TDS
Alsan RS Catalyst Powder - Technical Data Sheet
Alsan RS Catalyst Powder TDS