Materials:Aluminum Stack Flashing (Sloped) (Precision)

Jump to: navigation, search

Materials:Aluminum Stack Flashing (Sloped) (Precision)

Revision as of 18:47, 5 February 2021 by James Klassen (talk | contribs) (Created page with "{| class="wikitable" |- | style="background-color: #ffffcc; column-width:100%" | '''Notice to the Reader''': The information published in the RCABC '''''Roofing Practices Ma...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Notice to the Reader:

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance
Manufacturer
Precision Metals Ltd.
Accepted for the RoofStar Guarantee Program
October 2019
Accepted for application in
Water-shedding Systems
Product Summary
Aluminum pipe flashing (sloped/pitched), welded to an aluminum base. See sizing chart on Technical Drawing for optional sizes.
Suitable for pipe-type penetrations that terminate below top edge of flashing.
Conditions and Limitations
Requires fitted settlement cap (see separate listing for RoofStar-accepted caps).
Not for use with penetrations that do not terminate inside the flashing (i.e. cable or gas line penetrations).
Click below for the Technical Drawing.
Technical Drawing

Back to Accepted Materials

Home