Materials:Colphene Flam HR SP

Jump to: navigation, search

Materials:Colphene Flam HR SP

Revision as of 22:45, 22 November 2021 by James Klassen (talk | contribs)
Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Soprema Inc.
Accepted for RoofStar Guarantee Program
February 2018
Product Summary
Colphene Flam HR SP is the top layer of a 2-ply waterproofing membrane composed of SBS modified bitumen and a non-woven polyester reinforcement. The top surface of the membrane is sanded; the bottom face is covered with a thermofusible plastic film. This material is used only in a protected waterproofing assembly at grade (on concrete), on in a Protected Membrane Roof system.
Roofing Installation Guidelines
Waterproofing Installation Guidelines
Click below for the Technical Data Sheet
Technical Data Sheet



Back to Accepted Materials


Home