Difference between revisions of "Materials:EverGuard Freedom HW TPO"

Jump to: navigation, search

Difference between revisions of "Materials:EverGuard Freedom HW TPO"

Line 7: Line 7:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
| '''Manufacturer''': [http://www.gaf.com/ '''www.gaf.com''']
+
| '''Manufacturer''': [https://www.gaf.ca/ '''gaf.ca''']
 
;:  
 
;:  
 
;Accepted for '''''RoofStar Guarantee Program''''': since 2002
 
;Accepted for '''''RoofStar Guarantee Program''''': since 2002

Revision as of 18:59, 23 April 2021

Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: gaf.ca
Accepted for RoofStar Guarantee Program
since 2002
Product Summary
GAF EverGuard® TPO thermoplastic polyolefin single-ply membrane systems have been engineered to provide premium performance at a very cost-effective price. Strong, flexible, durable EverGuard® TPO membrane is suitable for use in fully adhered, mechanically attached, and ballasted single-ply roof systems.
EverGuard® TSR roof systems utilize either a 0.45", .060", or.080" thick polyester scrim-reinforced thermoplastic polyolefin membrane. The membrane is supplied in 5 foot and 10 foot widths and is available in white, gray or tan.
EverGuard® TFB roof systems utilize either a 0.45", .060", or.080" thick polyester scrim-reinforced thermoplastic polyolefin membrane with polyester fleece backing. The membrane is supplied in a 5 foot and 10 foot widths and is available in white, gray, or tan.
EverGuard® Freedom TPO HW Roof Systems utilize 0.45" (1.1 mm) thick polyester scrim-reinforced thermoplastic polyolefin membrane. The membrane has factory applied adhesive and release film on the bottom side (self-adhered). Membrane seams are 6" wide (150 mm) and are heat welded. EverGuard® Freedom™ TPO HW is a self-adhered membrane with a heat weldable seam available in 45 mil and 60 mil thickness in 2 versatile colors: white and earth tone tan. Freedom™ membranes combine EverGuard’s proven TPO technology with an added engineered adhesive pre-applied to the bottom of the sheet for quick, hassle-free installation. Freedom™ HW membrane includes a traditional 3" heat weldable seam. Freedom™ membranes are especially suited for schools and hospitals, high-rises and limited access buildings, and coastal locations and areas subject to extreme wind conditions. Advantages include no open flames or hot asphalt on your roof and the factory-applied adhesive eliminates guesswork or uncertainty by the installer, resulting in uniform application.
Installation Guidelines
Click below for the Technical Data Sheet.
Technical Data Sheet



Back to Accepted Materials


Home