Difference between revisions of "Materials:EverGuard TFB TPO"

Jump to: navigation, search

Difference between revisions of "Materials:EverGuard TFB TPO"

m (James Klassen moved page Materials:EverGuard TFB 45 to Materials:EverGuard TFB TPO Membrane over redirect)
 
(One intermediate revision by the same user not shown)
Line 7: Line 7:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
| '''Manufacturer''': [http://www.gaf.com/ '''www.gaf.com''']
+
| '''Manufacturer''': [https://www.gaf.ca/ '''gaf.ca''']
 
;:  
 
;:  
 
;Accepted for '''''RoofStar Guarantee Program''''': since 2002
 
;Accepted for '''''RoofStar Guarantee Program''''': since 2002

Latest revision as of 19:02, 28 July 2021

Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: gaf.ca
Accepted for RoofStar Guarantee Program
since 2002
Product Summary
GAF EverGuard® TPO thermoplastic polyolefin single-ply membrane systems have been engineered to provide premium performance at a very cost-effective price. Strong, flexible, durable EverGuard® TPO membrane is suitable for use in fully adhered, mechanically attached, and ballasted single-ply roof systems.
EverGuard® TSR roof systems utilize either a 0.45", .060", or.080" thick polyester scrim-reinforced thermoplastic polyolefin membrane. The membrane is supplied in 5 foot and 10 foot widths and is available in white, gray or tan.
EverGuard® TFB roof systems utilize either a 0.45", .060", or.080" thick polyester scrim-reinforced thermoplastic polyolefin membrane with polyester fleece backing. The membrane is supplied in a 5 foot and 10 foot widths and is available in white, gray, or tan.
EverGuard® Freedom TPO HW Roof Systems utilize 0.45" (1.1 mm) thick polyester scrim-reinforced thermoplastic polyolefin membrane. The membrane has factory applied adhesive and release film on the bottom side (self-adhered). Membrane seams are 6" wide (150 mm) and are heat welded.
Installation Guidelines
Click below for the Technical Data Sheet
Technical Data Sheet (45 mil)
1.11 mm (45 mil) Membrane TDS
Technical Data Sheet (60 mil)
1.52 mm (60 mil) Membrane TDS
Technical Data Sheet (90 mil)
2.03 mm (90 mil) Membrane TDS